Why does my Dodge Durango not shift into high gear?

Today on my 2000 Durango the transmission light came on and now it does not want to shift into high gear, going 30 miles an hour the rpms are at 2. we went to advance and the guy put the machine on it and he said it was the turbo sensor…can anyone help :confuse:

What kind of transmission does a Dodge Durango have?

My 2000 dodge durango 5.9 with the 46RE usually skips 1st gear and starts off in 2nd while proceeding to shift out well. Sometimes it will start off in 1st very briefly and then slip right into 2nd. NO codes through a generic obdII scan.

Why is the front differential always engaged on a Dodge Durango?

If im not mistaken the front differential on a durango with an electronic transfercase is always engaged meaning it doesn’t have an actuator to engage the front differential when using the 4wd, im sure it is if its an AWD with just hi lo functions. It sounds like the noise is in the transfer case.

Are there any problems with the Dodge Durango?

If its full and clean (Its ATF fluid, so should have a red tint), there have been some problems with the shifter motor on the side not doing its job, not properly engaging and disengaging but haven’t seen one have that particular complaint. The durango is the r/t with the 5.9 and it does have a 2wd switch also.

Are there transmission problems in a Dodge Durango?

I started searching for Dodge Durango transmission problems on Google and came across a YouTube video that showed a similar issue, except this guy was having his problem at 70 mph where the vehicle kept dropping into and out of overdrive.

What should the ohms be on a Dodge Durango?

Ideally, it should read from about 800 ohms to 5 K-ohms and increase consistently while rotated in one direction. The sensor is easy to access on the side of the throttle body just under the air box.

Where does the grinding sound come from on a Dodge Durango?

The durango is the r/t with the 5.9 and it does have a 2wd switch also. Listening a little bit closer to it, the grinding/clicking sound actually sounds like it is coming from the front axle area, behind the drivers side wheel.

What to do if your Dodge Durango is having transmission problems?

So if you have a Dodge Durango or Dodge truck based on the same chassis and you’re having transmission issues like I described, you may want to change these sensors to see if the fix works for you too. There’s too high a temptation for a dealership or transmission shop to want to ‘over repair’ and hence over charge for a simple issue like this.

What to do if your transmission slips when shifting gears?

If you’re looking for a quick solution to any problem you have when shifting gears, try BlueDevil Transmission Sealer. Our expertly crafted solution is designed to restore seals and gaskets to their factory condition without putting your car in the shop!

What causes a Dodge Durango to not start?

Another common problem specifically impacts Dodge Durango vehicles with the 5.7-liter V8 engine. On these, the Camshaft position sensor occasionally fails, causing the engine to stall or not start.

Why is my transmission not shifting out of first gear?

Transmission wont shift out of first gear Stays in limp-in mode, Chrysler vehicles If you own a Chrysler vehicle and the transmission stays in 1 gear and will not shift, chances are the computer has put it into “limp in” mode. The underlying condition can be an internal fault, a defective solenoid pack,

How can I get my Dodge Durango to shift?

Usually, I could get it to shift by dropping it into 2nd gear with the shift lever, then back into drive and it would usually shift properly after that. This was an intermittent problem too, one that I feared would be hard to diagnose and fix.

What kind of car won’t shift out of second gear?

If you own a Chrysler vehicle and it won’t shift out of second gear, read this post. If you own a Chrysler, Dodge, or Plymouth vehicle and discover that the transmission will shift from first to second gear but will not shift out of second gear, your vehicle has locked itself into “limp-in” mode.

Why is my transmission not shifting right?

A lack of fluid or dirty fluid would cause the transmission not to shift properly. We recommend checking for transmission fluid loss, and using BlueDevil Transmission Sealer if the system is low. If the fluid looks dirty, you may want to have a transmission system flush performed and refill it with clean fluid.

Why does my transmisson does not shift?

A faulty PCM (powertrain control module) will affect the transmission performance because it controls the gearbox mechanism in most car models. The PCM will have no input if the speed sensor fails. In that case, the transmission will not shift properly. To solve this problem, you have to check the speedometer to see that it is functioning.

What is the cause if the transmission does not shift gears?

Changing the fluid solves plenty of transmission issues but if the problem of automatic transmission won’t shift into 3rd gear persists, the parts you should check are the throttle cables. A defective cable with excessive slack is likely to create issues with smooth shifting of the gears. It may also totally stall the shifting.

What causes delayed shifting in an automatic transmission?

Every time a gear change is required, the car’s computer activates a transmission solenoid, which directs transmission fluid into the valve body to engage the correct gear. When this is faulty or not working properly, this can cause a delay in gear shifting or in some cases cause the car to not shift at all.

Why do I feel like my transmission is slipping?

If you owned your car for a while, you have probably learned how your engine behaves and when your transmission should shift to the next gear. If you feel that the engine RPMs rise when you try to accelerate, but the car is not going faster – you have a slipping transmission.

What happens when you shift your transmission hard?

When the transmission shifts hard, it can damage internal components including valve bodies, hydraulic lines, and in some cases mechanical gears. If you notice your transmission is shifting harshly or roughly, you should contact a local ASE certified mechanic as soon as possible.

What does trouble code mean on Dodge Durango?

One of the most common problems with the Dodge Durango is when it throws the P0700 trouble code. A trouble code is a code thrown out by an automatic transmission whenever it detects in the Durango that there is an issue that needs your attention. In the case of the P0700, it is a general code.

Is it expensive to change transmission fluid in Dodge Durango?

Yes the change is expensive due to both the cost of the special fluid and the fact that the whole plastic pan (integral fluid filter) has to be replaced. Also the procedure for checking the the correct fluid level is a real PITA. I recently went thru this, but haven’t changed it yet.

Is there dipstick for Dodge Durango SRT transmission?

If you choose to have it done, it will cost an arm and a leg. For my SRT, this issue is addressed on page 423/424 of the 2018 Durango SRT owners manual…and it is consistent with what the mechanic said. Filled for life. No dipstick, either, so an easy check of fluid color is not possible.

How many miles does a Dodge Durango have?

My 2015 Durango with the 3.6 and zf 8 speed is approaching 50,000 miles. All the other cars I’ve owned I always thought that meant to drain and refill the tranny fluid.

Why does my Dodge Durango randomly shift gears?

If your Durango seems to randomly shift gears, such as going from park to reverse without you moving the lever, the gear shift lever locking system may be malfunctioning.

What to do if your Dodge Durango gears lock?

If your Durango is experiencing any of these problems, take it to a mechanic for repair as soon as possible. The gear shift lever locking mechanism is designed to keep the gear shift from moving except when you intentionally move it. If the gear shift lever lock gets stuck, you will not be able to move the gear shift.

What happens when you refuse to shift the gear shift?

Refusing to Shift The gear shift lever locking mechanism is designed to keep the gear shift from moving except when you intentionally move it. If the gear shift lever lock gets stuck, you will not be able to move the gear shift. This problem occurs when the gear shift lever lock stops blocking the lever from moving.

When did the Dodge Durango get a recall?

In 2007, Dodge recalled over half a million vehicles, including the 2001-2002 Durango, because of problems with the gear shift locking mechanisms cause the vehicles to slip out of gear when they were not supposed to.

Why does my Dodge Durango stall at a stop sign?

But it is starting to die more ofter at a stop sign then the RPMs jumping back up. Also two times since Ive had it when it has been raining, I will be on the high way and it will start to seem like it cutting out like it isnt getting fuel. But it stops after a couple minutes and never dies.

What does it mean when your transmission is not shifting?

Q: transmission not shifting and the rpm’s keep climbing up. the transmission is not shifting properly, replaced both input and output speed sensors, but the rpms seem to be climbing high and the transmission does not seem to be shifting, gets up to speed fine, but the rpms just keep climbing on it… My car has 200000 miles.

How to remove transmission shaft from Dodge Durango?

Rotate crankshaft with socket wrench on dampener bolt. (20) Mark propeller shaft and axle companion flanges for assembly alignment. Then disconnect and remove propeller shaft. (21) Disconnect wires from park/neutral position switch and transmission solenoid. (22) Disconnect throttle valve cable from transmission bracket and throttle valve lever.

Can a overdrive unit be removed from a Dodge Durango?

The overdrive unit can be removed and serviced separately. It is not necessary to remove the entire transmission assembly to perform overdrive unit repairs. CAUTION: The transmission and torque converter must be removed as an assembly to avoid component damage.

How to remove transmission from Dodge Durango 4 x 4?

(25) Remove bolts securing rear support and cushion to transmission and crossmember. Raise transmission slightly, slide exhaust hanger arm from bracket (Fig. 74) and remove rear support. (26) Remove bolts attaching crossmember to frame and remove crossmember. (27) On 4 x 4 models, disconnect vent hose from transfer case.

Can a bad speed sensor affect shift timing?

Harsh or improper shifting. Without a valid speed signal from these sensors, the PCM will not be able to correctly control the shifting of gears within the transmission. This may cause the transmission to shift roughly or more quickly than normal. It’s also common that a problem with these sensors can impact the shift timing,…

What are some common Dodge Durango transmission problems?

Many of these issues, including rough shifting, hesitation at speed and the failure of the transmission to engage, are typically traced back to flawed transmission control modules. For several model years, Chrysler has issued a recall on the transmission control module in the Dodge Durango.

Is there a recall on the Dodge Durango?

For several model years, Chrysler has issued a recall on the transmission control module in the Dodge Durango. Clunking or banging in the transmission is reported less frequently and typically results from worn clutches or gears.

What causes engine problems in a Dodge truck?

1 Oil Sludge. Otherwise known as buildup – when the oil thickens, and your engine performance reduces significantly. 2 Engine Failure. Basically, this concern is the equivalent of old age for your engine. 3 Component Breakdown. 4 Overheating. 5 Oil Foam. 6 Maintenance Issues. 7 Engine Ticking Noises. …

How to fix a 4.7 Dodge engine?

7 Common 4.7 Dodge Engine Problems & Possible Solutions in 2021. 1 01. Oil Sludge. Otherwise known as buildup – when the oil thickens, and your engine performance reduces significantly. This gunk is like a clogged 2 02. Engine Failure. 3 03. Component Breakdown. 4 04. Overheating. 5 05. Oil Foam. More items

Where can I get an oil change on my Dodge Durango?

I was impressed lately when I took it to a Grease Monkey, which is an oil change franchise common in Colorado, and learned that one of their other customers owns 2 Dodge Durangos of the same vintage as mine and each was approaching 300,000 miles with no major issues.

What was the transmission problem on a 1998 Dodge 1500?

The Doge transmission in 1998 is known for the governor pressure switch and solenoid failures causing alot of owners to be duped into a new transmission. Heres the how-to save alot of money for the do-it-yourselfer. Loading…

What are the trouble codes on a Dodge?

1 Dodge Codes 2 Trouble Code 3 P0171 4 P0300 5 P0301 6 P0340 7 P0420 8 P1000 – P1099 (Fuel and air metering and auxiliary emission control) 9 P1200 – P1299 (Fuel and air metering – injector circuit) 10 P1300 – P1399 (Ignition system or misfire)

How much does it cost to repair a p0871 Dodge?

Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost of diagnosing the P0871 DODGE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

What does p0871 mean on a Dodge Charger?

P0871 DODGE Meaning The Powertrain Control Module (PCM) uses three pressure switches to monitor the fluid pressure in the LR, 2/4, and OD clutch circuits. The pressure switches are continuously monitored for the correct states in each gear.

Why is my Dodge Durango sputtering on the highway?

Wanted to test it with a gauge but couldn’t find the time. Out of nowhere on the highway about a week after the oil pressure, it sputtered on the highway cruising at 60, 1800ish rpm and acted like it was going to die… I gave it a little gas and all was back to normal.

What to do if your Dodge truck does not shift?

If you are in doubt if it shifted or not, pull the shifter back down to Low. If your Transmission does not shift, proceed to the next step after the transmission cools down. Hot ATF is no fun so be careful. Once the ATF has cooled down so that you don’t get burnt. Drop the transmission pan for a closer inspection of the problem.

Why does my Dodge Durango not shift into high gear?