What does etc light on Dodge Ram mean?

One of the most typical issues owners of the Dodge RAM truck tend to suffer is the ETC light flashing out of nowhere. When this happens, it means the electronic throttle control is damaged or malfunctioning – so it is time to repair. But learning how to fix the electronic throttle control 5.7L Hemi engine is not an easy job.

What are the different colors of RAM warning lights?

They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 70 of them so be patient! Models examined include 1500, 2500, 3500, Chassis cab, Promaster, and Cargo Van.

Is the power steering on my 2014 Dodge Ram working?

2014 Dodge Ram 1500 5.7l 4×4 electronic power steering is not functioning. Hard to steer. I am not sure it requires Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Are there any problems with the Dodge Ram 1500?

Fourth-generation Dodge Rams are more powerful than these trucks have ever been, yet they’re still susceptible to issues that can make them dangerous to drive. Electrical issues are unfortunately common in late-model RAMs and are some of the worst 2010 RAM 1500 problems. 1. TIPM Issues

What are the warning lights on a ram?

The following are warning lights and indicators found in vehicles built by Ram. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 70 of them so be patient!

2014 Dodge Ram 1500 5.7l 4×4 electronic power steering is not functioning. Hard to steer. I am not sure it requires Dodge Repair Questions? Ask a Mechanic for Answers ASAP

What causes a ticking sound in a Dodge Ram 1500?

A bad or failing manifold leads to decreased engine performance, and broken manifold bolts are common in Dodge Ram 1500s of all ages. The most common symptom of broken or degraded bolts is a ticking sound on cold starts, frequently heard from the passenger side of the truck.

What causes an electronic throttle control light to come on?

The most common causes of an electronic throttle control light are a faulty throttle control sensor or a faulty throttle accelerator pedal position sensor. But while those are the most common causes of an electronic throttle light, they aren’t the only things that could be going on.

Why does the etc light come on in my truck?

The ETC light is simply an indicator that notifies you when something is wrong with the system. There are multiple controls and sensors that make up this system. When the light comes on in my truck, and then comes on in your truck, it could be for completely different things.

What does the etc light on the dashboard mean?

That’s why the ETC light in your dashboard illuminates when problems occur. This light indicates that there is a problem with the ETC and you should have it checked as soon as possible. The ETC light is normally the last warning you will receive before your engine performance is affected.

Is there a problem with the throttle on a Dodge Ram?

I noticed a red lightening bolt on dash lit up. Looked it up , and manual says ETC (electronic throttle control error) Shortly after truck died. Restarted would only roll 3-5 mph throttle responded to nothing. Turned off and back on truck ran fine still have red light . Purchased new throttle position sensor from dealership still not corrected.

How much does it cost to change the etc light?

The ETC is an expensive engine component and since it is electronic its cost is sometimes non-negotiable. In most cases, you don’t need to change the ETC but if you have to you can expect to spend in excess of $200 – $300 and that too depending on the make and model of your car. Hello I’m Magnus, the owner and the writer of this website.

What causes a 2004 Dodge Ram 1500 to stall?

Some 2004 Dodge Ram 1500s stall when braking and at idle, as well. The most common report is that on a cold start, the truck won’t move when put in gear. The transmission may also slip or refuse to shift at all, which is one of the main 2006 Dodge Ram 1500 transmission shifting problems.

What causes a flashing check engine light on a Dodge Ram?

While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Ram’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped . If you have VVT, it may be having issues.

How to reset PCM and check engine light in Dodge Ram?

The reset procedure in your Dodge Ram is as easy as they come. First, park your truck and turn it off. Pull the hood lever under the driver’s side dash, and then pull the safety catch on the front of the hood to open it. Find the power distribution center (PDC); it will be a black box near the battery. Unlatch and open the cover of the PDC.

When does the engine light come back on?

You need to bite the bullet, take it to a dodge dealer and have them pull codes or look at a live feed… it is called “job security” for us mechanics. The light will come back on tomorrow or three months from now if all you do is turn off your engine or disconnect the battery. Same as putting a band aid on a broken bone.

What are the warning lights on a Dodge?

What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Dodge. Click a link to learn more about each one.

When did Dodge Ram 3500 Heavy duty truck come out?

It was in 2007 that Dodge started to use the smaller/more compact Ram 3500 Heavy Duty badge. 2006 still had the “Ram 3500” in the large, silver, letters on the driver and passgenger doors. @Eblue: you are right about the tail lights however. Dodge probably just photoshopped the new badge on the 2006 truck.

What kind of tail lights does a Dodge Ram have?

The 07-09 also had “3D” bulged tail lights, as opposed to the 03-06HD flat tail light lenses. That is a 2007-09 vintage.

What should I do if my Ram 1500 won’t start?

Start the engine with the donor battery connected. Make sure that you only use chargers that switch themselves off as soon as the battery is fully charged. The car charger must match the battery (performance, area of application). The RAM 1500 battery does not necessarily have to be removed.

Where is the starter on a Ram 1500?

Find the starter (hidden deep in the engine compartment between the gearbox and engine), at best with a lifting platform. Tap the starter lightly with a hammer to get the small electric motor going again.

How to reset the Check Engine light on a Dodge Ram?

Dodge Ram: How to Reset PCM and Check Engine Light. 1 Step 1 – Remove the PCM fuse. First, park your truck and turn it off. Pull the hood lever under the driver’s side dash, and then pull the safety catch 2 Step 2 – Reset the PCM. 3 Step 3 – Re-install the PCM fuse. 4 Related Discussions.

Are there any problems with the Dodge 5.7 Hemi engine?

In no specific order, four of the most common 5.7 HEMI problems are: A few more general notes prior to discussing each of these common faults in-depth. Simply because we refer to these problems as common does not mean every 5.7 will experience them. Also, engines are subject to potential problems that we won’t cover.

What kind of engine does a Dodge Ram have?

The Dodge 5.7L HEMI engine is also commonly referred to as the 345 HEMI in honor of its 345 cubic inch displacement. It’s a long running pushrod engine that debuted with 345 horsepower in the 2003 Dodge Ram.

What causes exhaust leak on Dodge Hemi 345?

Broken manifold bolts on the HEMI 345 create an exhaust leak. If it’s bad enough then you may notice power loss. A lot seem to fail even under the warranty period, so initial failures should be fixed by the dealership at no cost. Otherwise, you may be on your own for the repair.

Why does my Dodge Hemi engine keep ticking?

This seems to be the most common and serious cause of the Chrysler 345 HEMI engine ticking problem. It also appears most common on 2009+ models leading some to believe the multi-displacement system is to blame. It does make sense.

When does the throttle control light come back on?

The light will come back on tomorrow or three months from now if all you do is turn off your engine or disconnect the battery. Same as putting a band aid on a broken bone. This is not faulty engineering or a recall issue. It is a feature that protects your engine.

What happens when the throttle control warning light comes on?

There can be many different causes for the throttle control warning light, so a proper diagnosis is key. When the warning light comes on, there’s a possibility you either won’t be able to accelerate or you won’t be able to stop accelerating. Either of these situations could be extremely hazardous to you and your passengers.

What makes the throttle control light stick on a 2008 Dodge?

Re: electronic throttle control light on 2008 dodge… I had the same thing happen to me about a week ago and it was the Electronic Throttle Control. It will stick due to carbon build up.

How to install a headlight on a Dodge Ram?

Open the hood. 2. Remove the two 10mm bolts securing the headlight. 3. Behind the headlight, remove the rubber plug. (In the fender well) 4. Remove the 10mm nut securing the headlight. (Use folded painter’s tape on socket tip) 5. Unseat the OEM headlight. 6. Unclip the wiring harness. 7. Remove the OEM headlight. 8.

Re: electronic throttle control light on 2008 dodge… I had the same thing happen to me about a week ago and it was the Electronic Throttle Control. It will stick due to carbon build up.

When does the etc light come on in a diesel?

In practice, however, people have noticed that it is sensitive to system voltage, and frequently comes on when batteries are bad, so check that. Click to expand… The ETC light does not just indicate an issue with the throttle pedal in the diesel. The ETC light is tied to the EGR sytem.

Where is the electronic throttle control light on?

The Electronic Throttle Control light is flashing in the dash of my 2003 Ram 2500 with the 5.7 Hemi. The Malfunction Indicator Light is also on. The truck still runs fine, no missing or hesitation.

What does it mean when your electronic throttle control is failing?

When this happens, it means the electronic throttle control is damaged or malfunctioning – so it is time to repair. But learning how to fix the electronic throttle control 5.7L Hemi engine is not an easy job. There are various reasons the ETC may be failing.

The Electronic Throttle Control light is flashing in the dash of my 2003 Ram 2500 with the 5.7 Hemi. The Malfunction Indicator Light is also on. The truck still runs fine, no missing or hesitation.

What does trouble code mean on Dodge Ram?

One of the most common problems with the Dodge Ram is when it throws the P0700 trouble code. A trouble code is a code thrown out by an automatic transmission whenever it detects in the Ram that there is an issue that needs your attention. In the case of the P0700, it is a general code.

How do I reset the Dodge Ram throttle position sensor?

To reset the Dodge Ram throttle position sensor, you turn on the ignition without your foot on the brake, so the engine doesn’t start. Press the accelerator on the floor for 15 seconds. Release the accelerator, then turn the car off and start the engine and drive.

Where can I find the etc code for the throttle?

You may see the power reduced alert on the power gauge of your vehicle. In that case, it’s the throttle body that needs to fix. Again you may also see the ETC code if you check with an OBD2 scanner and see the code P0121, P0122, P1128, P1129, P2110, P2112, etc. then, it’s the throttle system that is causing these symptoms.

How can I reset the throttle control system?

To reset the throttle control system what you need to do is Switch on the ignition key, don’t start the engine. Then, wait for a minimum of 3 seconds. Now, press the accelerator pedal and do press and release five times amidst 5 seconds. Press the pedal again, and this time hold on pressing for around 20 seconds.

What should I do if my throttle control is not working?

1. Turn ignition on, but not the engine. 2. Wait until all the warning chimes have sounded. 3. Slowly depress gas pedal to 100% fully depressed and hold for a few seconds. 4. Slowly let off the gas pedal until returned to 0% position. 5. Turn off ignition. 6. Start engine.

Is there a throttle control problem on a Durango?

Also saw an 04 Durango show intermittent misfire issues. Changed plug wires, coils, cam and crank sensors, checked the wiring harness, the plugs, compression, alternator, battery…Never did know what the end result of that was, but I can ask tomorrow. Three green…

Is there a throttle control problem in a 2006 SXT 3.5?

About a week after I bought my 2006 SXT 3.5 I left the car outside over night for the first time. It was a really cold night. In the morning I started the car up and the lighting bolt red light was flashing (no check engine light). A couple minuets later the car was not responding to to the throttle pedal.

What does trouble code mean on throttle control?

The associated trouble code should identify a problem with the throttle controller, which can then be repaired. If the throttle control system gets damaged, erratic operation may cause a stumbling or hesitation when you try to accelerate.

How to fix the electronic throttle on a car?

Then, wait for a minimum of 3 seconds. Now, press the accelerator pedal and do press and release five times amidst 5 seconds. Press the pedal again, and this time hold on pressing for around 20 seconds. At least until the engine light stops the blinking and then stays on.

Why does my throttle control go into limp mode?

Solution: This indicates a serious failure of your throttle control system. The engine computer is programmed to go into limp mode when the system malfunctions, in an attempt to limit your speed and prevent damage to the engine. It can be caused by a sensor failure, or even by outside electromagnetic interference.

What is the first sign of throttle control failure?

The first sign of throttle control failure is a non-responsive throttle. This happens when you press the throttle but you do not get a quick response in terms of faster acceleration. You will feel a weak throttle response and at times a jitter before your car accelerates.

What are the symptoms of a lousy throttle system?

So, let’s see some significant symptoms that indicate a lousy throttle system. If the throttle body has any problems, then you will feel less power in driving. You may see the power reduced alert on the power gauge of your vehicle. In that case, it’s the throttle body that needs to fix.

What does etc light on Dodge Ram mean?