What kind of battery does a Dodge Ram need?
What kind of battery does a Dodge Ram need?
The Dodge Ram 1500 requires a group size 65 battery that is capable of 850 cold cranking amps. Duracell Advanced Generation, Motorcraft, Super Start Extreme, Duralast Gold, Odyssey Extreme, and Nortstar are a few recommended choices. Most quality batteries will come with a warranty of two or three years.
How to reset the Check Engine light on a Dodge Ram?
Dodge Ram: How to Reset PCM and Check Engine Light. 1 Step 1 – Remove the PCM fuse. First, park your truck and turn it off. Pull the hood lever under the driver’s side dash, and then pull the safety catch 2 Step 2 – Reset the PCM. 3 Step 3 – Re-install the PCM fuse. 4 Related Discussions.
What to do if your engine light is not on after battery replacement?
If you followed the correct procedure to replace the battery of your vehicle and the engine light was not on before you replaced the battery all you will have to do is to diagnose the system and reset the engine computer. It could happen to BMW, Mercedes, Audi, and almost any newer vehicle. This happened on our BMW e46.
Where is the reset button on a Dodge Ram?
The reset procedure in your Dodge Ram is as easy as they come. First, park your truck and turn it off. Pull the hood lever under the driver’s side dash, and then pull the safety catch on the front of the hood to open it. Find the power distribution center (PDC); it will be a black box near the battery.
How do you shut off a check engine light?
With the key in the ignition, turn it to the first notch. Reverse the actions of the first step by plugging the PCM fuse back into the PDC. Go back and start the truck to make sure that the check engine light has been shut off. If it didn’t work, try again. Once you’ve got it to work, put back the cover for the PDC and close the hood of your truck.
Why is the battery light on in my Dodge Journey?
A bad alternator will usually make itself known when the engine is already running. If you see your Journey’s battery light turns on while the engine is already running, that is a strong indication that the alternator is no longer providing enough wattage to power the various electrical systems and charge the battery at the same time.
What causes a battery light to come on after a battery change?
This is especially true in late-model vehicles with their more sophisticated internal diagnostic systems. There are usually two things that cause the battery light to come on after a battery replacement. The most common is a loose connection – perhaps a terminal connector was not tightened sufficiently when the battery was replaced.
The reset procedure in your Dodge Ram is as easy as they come. First, park your truck and turn it off. Pull the hood lever under the driver’s side dash, and then pull the safety catch on the front of the hood to open it. Find the power distribution center (PDC); it will be a black box near the battery.
