Is there a way to bypass GM PassLock?

At NEWROCKIES Inc., we’ve designed our PRO Bypass Module with the specific purpose of bypassing faulty GM VATS, Passkey and Passlock security systems IN FULL.

How to bypass the PassLock sensor on a 2002 Pontiac Grand Am?

This web page will guide you through the steps necessary to bypass the “Passlock Sensor” on a 2002 Pontiac Grand Am, and keep the “SECURITY” light off forever. The steps necessary are similar on the other models listed above. There are generally only minor differences in how to get the radio out to get to the wires.

How big is resistor on GM PassLock system?

If you can’t find something anywhere near to what you read on the ohm meter you have the option to use a resistor between 0.5K ohms up to 13.6K ohms.

Where is the ignition switch on a GM PassLock?

Pull the radio out of it’s cavity. Disconnect the wiring connector and the antenna wire, and set the radio aside. On the left side of the radio cavity, there will be an opening, through which you will be able to see the Ignition Switch.

At NEWROCKIES Inc., we’ve designed our PRO Bypass Module with the specific purpose of bypassing faulty GM VATS, Passkey and Passlock security systems IN FULL.

How does a PassLock system on a car work?

PassLock systems are based on the theory that car thieves will use a slide hammer to yank the lock cylinder out of the housing and then try to turn the ignition switch with a needle nose pliers. The PassLock system works when the lock cylinder moves a magnet past a Hall effect sensor.

Is there a PassLock bypass for newrockies cars?

NEWROCKIES Inc. Passlock Bypass disables the ENTIRE system. Save your car for 80% less than the dealer charges? With a much better solution and a lifetime warranty.

Where is the PassLock switch on a Chevy?

The switch allows the car’s passlock system to be switched on or off by splicing with a yellow wire that’s plugged into the cylinder lock. Once completed, the new switch should be placed underneath the dash right below the key hole.

Is the Pro module a PassLock bypass module?

The PRO Module is a FULL Passlock Bypass Module instead that goes right to the heart of the problem and solves it by reproducing the proper output signal that the PCM (onboard computer) uses to enable the fuel injectors.

When did the Chevrolet PassLock system come out?

One of Chevrolet’s solutions for stopping thieves from driving away with a car is, coincidently, doing the same thing to the actual owner. Passlock is an immobilizer introduced by GM in many mid-to-late 1990’s vehicles.

NEWROCKIES Inc. Passlock Bypass disables the ENTIRE system. Save your car for 80% less than the dealer charges? With a much better solution and a lifetime warranty.

What does it mean to have a PassLock on your car?

Temporary fixes are a pain in the butt, but permanent solutions can get quite expensive. Passlock is an immobilizer introduced by GM in many mid-to-late 1990’s vehicles. Immobilizers are “electronic security device fitted to an automobile that prevents the engine from running unless the correct key (or token) is present.”

How to permanently disable GM PassLock system Hilux Motors?

5.Take your digital ohm meter and put your negative probe on the black wire that you stripped back earlier. Put the positive probe on the yellow end of the wire that leads BACK to the ignition. Use alligator clips here to help the probes grab the wires. 6.With the probes hooked up turn the ignition to the run position.

Is there a problem with the PassLock sensor?

The short answer is there’s a problem with the sensor. Some have suggested that the pins in the system are “tin” plated and subject to oxidization over time. Others say their system is possessed by the devil and in need of an exorcist.

Can a GM security system be moved to another car?

Newrockies inc proudly manufactures its modules with top quality electronic components. No more risks of remaining on the road. Universal. The same module works with over 100 different GM and Isuzu cars – you can even move it on your next car! Trusted.

How to permanently disable and remove GM security systems?

GM Security Systems are killing cars all over North America and the only final solution is to disable and remove them permanently. This is what NEWROCKIES Inc is all about.

How do you disable the passkey on a GM car?

You can swiftly disable the passkey anti-theft system and get your GM started by performing the “relearn” procedure, which disables the passkey by resetting it. Insert your GM key into the ignition, attempt to start the car, and let it stall.

How to bypass vats, Passkey and PassLock security systems in GM?

It can be VATS, Passkey or Passlock anti theft system that is going bad causing your issue. I am going to share a secrete with you on how you can bypass these systems with very little effort. This is a really unique security system bypass kit that you can use to override your current factory theft system on your GM vehicle.

Is there a bypass kit for GM cars?

This GM security Bypass kit will work for several GM, Oldsmobile, Chevy, Pontiac or even Buick vehicles on the street today. I was surprised to see how easy it was to install with very little effort. I recommend this bypass kit to anyone having factory security issues on any one of the following vehicles (see list below).

How can I disable the passkey anti-theft system?

Is there a way to bypass GM PassLock?