Easy tips

What kind of alternator does a Dodge Ram have?

What kind of alternator does a Dodge Ram have?

This 12V, 136A, alternator is a Direct replacement for your stock alternator on your Cummins engine in Dodge Ram (model years: 1989-2002), with no mounting bracket modifications. Our custom built Dodge Cummins One Wire Alternator does not require any connections to your vehicles computer to function, simplifying your charging system.

Where is the charge wire on a Dodge alternator?

There is a Black/Grey Wire between the Gen/Alt and the PDC which contains the 140amp fuse and then a red wire to the battery. This is the large charge wire that electricity flows from the Gen/Alt to the 140amp fuse in the PDC and onto the battery.

Why is my alternator not charging while the engine is running?

If you have power on the blue wire while the engine is running and can hook 12v to ground on the green wire while the engine is running and voltage on the large stud your alternator is bad, but if you don’t have one of the other………

Where is the PCM located on a Dodge alternator?

This is where the PCM lives behind your air filter box, notice I removed mine for better access, TURN THE KEY OFF before disconnecting. The connector closest to the passenger side is the Grey C3 connector. The Connector in the middle is the White C2 connector. Reference the wiring diagram at the PCM.

This 12V, 136A, alternator is a Direct replacement for your stock alternator on your Cummins engine in Dodge Ram (model years: 1989-2002), with no mounting bracket modifications. Our custom built Dodge Cummins One Wire Alternator does not require any connections to your vehicles computer to function, simplifying your charging system.

What should the voltage be on a Dodge Ram?

CASE 1: Your multimeter registered 13.5 to 14.7 Volts. This test result confirms that your Dodge Ram pick-up’s alternator is OK and that it is charging the battery. If the alternator were fried, the voltage your multimeter would have recorded would have been around 12.5 Volts that would have steadily decreased the longer the engine ran.

There is a Black/Grey Wire between the Gen/Alt and the PDC which contains the 140amp fuse and then a red wire to the battery. This is the large charge wire that electricity flows from the Gen/Alt to the 140amp fuse in the PDC and onto the battery.

When do you know the alternator is working?

Now, if your multimeter registers 13.5 to 14.7 Volts with the engine running, then the alternator is working and thus charging the battery. NOTE: You’ll need to make sure that the battery has enough of a charge to keep your Dodge Ram pick-up running for at least 5 minutes to do this test.

What kind of engine is in Dodge Challenger?

This new V6 is one of the most technologically advanced engines to date, created by Chrysler. This V6 is used in popular vehicles around the world such as the Dodge Challenger, Jeep Cherokee, Jeep Wrangler, and Ram 1500. The 3.6L Pentastar V6 for three years in a row was among the top ten engines in the US market.

What happens to the battery when the alternator fails?

Touch device users, explore by touch or with swipe gestures. The alternator charges the battery and keeps the electrical accessories of the car working while it is running. When the alternator loses capacity or fails, the electrical systems will only stay on until the battery’s reserve charge is depleted.

What should the volts be on a Dodge Charger?

A reading around 12.5 or 12.8 volts is normal. A reading below 12 volts may indicate your Dodge’s battery is the culprit. Charge the battery and, without running the car in the meantime, test it again the next day.

When did the Dodge 3.9 V6 come out?

The 3.9 in use In 1987, its first year, the 3.9 used Holley 6280 two-barrel feedback carburetors. This setup may have lasted into 1988 on Dakotas, but then Dodge slapped an EFI intake and induction on the 318 and the 3.9. They shared a Holley throttle body, until the Magnum versions, and used a non-vacuum advance distributor.

Touch device users, explore by touch or with swipe gestures. The alternator charges the battery and keeps the electrical accessories of the car working while it is running. When the alternator loses capacity or fails, the electrical systems will only stay on until the battery’s reserve charge is depleted.

A reading around 12.5 or 12.8 volts is normal. A reading below 12 volts may indicate your Dodge’s battery is the culprit. Charge the battery and, without running the car in the meantime, test it again the next day.

How long does it take to change the alternator on a Dodge truck?

The alternator is responsible for charging the batteries and alternating the electric current to a current the truck can use. The alternator is accessible and replacing it should only take a matter of minutes. Ensure the truck is parked on a flat and level surface. Open the hood for access to the engine bay.

If you have power on the blue wire while the engine is running and can hook 12v to ground on the green wire while the engine is running and voltage on the large stud your alternator is bad, but if you don’t have one of the other………

What’s the best way to replace an alternator?

If you find any of those issues, you’ll need to replace it. Remove the alternator from the engine bay. With the belt pulled off of the alternator pulley and the wires disconnected, the alternator should come out freely. You may need to wiggle the alternator around some things in order to remove it.

Where can I find a used Ram 2500?

With the largest selection of cars from dealers and private sellers, Autotrader can help find the perfect 2500 for you. Autotrader has 9,239 Used RAM 2500s for sale, including a 2015 RAM 2500 Laramie, a 2019 RAM 2500 Laramie, and a 2020 RAM 2500 4×4 Crew Cab Laramie.

What kind of towing does a Ram 2500 do?

The RAM 2500 models are intended for the most extreme personal-towing needs. With the diesel model’s gains in fuel efficiency, as well as other maintenance-related improvements, running costs should be down versus these trucks’ predecessors.

How much does a Ram 2500 truck cost?

About the RAM 2500 Truck Original MSRP/Price 2500 Big Horn 4×2 Crew Cab 6’4′ Box $43225 / $40633 2500 Big Horn 4×2 Crew Cab 8′ Box $43425 / $40814 2500 Big Horn 4×2 Reg Cab 8′ Box $38770 / $36367 2500 Big Horn 4×4 Crew Cab 6’4′ Box $46125 / $43258

What kind of engine does a 1993 Dodge truck have?

A 1993 dodge dually 3/4 ton 4×4 with a 5.9 cummins turbo diesel engine and a 5 speed standard transmission. Everything anyone could ever ask for. The is a brand new clutch kit that was installed last week. As you can see the bed doesn’t quite fit right. That’s because that’s not the bed for that truck.

What kind of regulator is in one wire alternator?

The regulator is built into our One Wire Alternator. Choose from standard 8 Groove Pulley or the Decoupler Pulley in the Drop Down Options. NOW AVAILABLE WITH OPTIONAL TERMINAL FOR TACH OR HOUR METER. SELECT YOUR OPTION IN THE DROP DOWN BELOW AND ADD TO CART.

What should I do if my alternator doesn’t work?

The alternator should be quiet. If you hear squealing, rattling or grinding coming from the alternator, it will need repair or replacement. Arthur Barnhouse has written numerous short stories, contributed content to various websites and was an invited speaker at a university symposium on creative writing.

What kind of alternator does a Dodge Dakota have?

270XP High Amp Alternator for Dodge Dakota, Durango, Ram & Jeep Commander, Grand Cherokee, Liberty Vehicles (11276-270XP)

Where can I buy an alternator for my car?

If you need an alternator or other charging system parts, shop O’Reilly Auto Parts. We also carry jump starters, car batteries, and starters for most vehicles.

A 1993 dodge dually 3/4 ton 4×4 with a 5.9 cummins turbo diesel engine and a 5 speed standard transmission. Everything anyone could ever ask for. The is a brand new clutch kit that was installed last week. As you can see the bed doesn’t quite fit right. That’s because that’s not the bed for that truck.

What kind of engine does a Dodge Ram have?

FITS MAKE AND MODEL YEARS WITH CUMMINS ENGINE: Dodge Ram 1989, Dodge Ram 1990, Dodge Ram 1991, Dodge Ram 1992, Dodge Ram 1993, Dodge Ram 1994, Dodge Ram 1995, Dodge Ram 1996, Dodge Ram 1997, Dodge Ram 1998, Dodge Ram 1999, Dodge Ram 2000, Dodge Ram 2001, Dodge Ram 2002

What kind of truck is Dodge W250 diesel?

Pic 1: 1993 W350 Cummins diesel Dana 70 3.54 Chassis cab dually axle. This is an open diff. Was a 5 speed truck. SOLD 1989 Dodge Ram D250 Dana 70 3.54 non locker.

What kind of truck is Dodge D250 Dana?

SOLD 1989 Dodge Ram D250 Dana 70 3.54 non locker. This was from a Cummins 5 speed truck. $350 Pic 2: SOLD Pic 3: 1990 Dodge Ram A500 with lockup. 2wd. 200k on it. Comes with TC. $300 obo Pic 4: 1993 Dodge 150 rear axle. Will fit Little Red Express trucks as well. 125,000 km on axle.

FITS MAKE AND MODEL YEARS WITH CUMMINS ENGINE: Dodge Ram 1989, Dodge Ram 1990, Dodge Ram 1991, Dodge Ram 1992, Dodge Ram 1993, Dodge Ram 1994, Dodge Ram 1995, Dodge Ram 1996, Dodge Ram 1997, Dodge Ram 1998, Dodge Ram 1999, Dodge Ram 2000, Dodge Ram 2001, Dodge Ram 2002

The regulator is built into our One Wire Alternator. Choose from standard 8 Groove Pulley or the Decoupler Pulley in the Drop Down Options. NOW AVAILABLE WITH OPTIONAL TERMINAL FOR TACH OR HOUR METER. SELECT YOUR OPTION IN THE DROP DOWN BELOW AND ADD TO CART.

How does a Cummins turbo diesel alternator work?

The truck uses two batteries to power the components and the Cummins turbo diesel. The alternator is responsible for charging the batteries and alternating the electric current to a current the truck can use. The alternator is accessible and replacing it should only take a matter of minutes.

What are the symptoms of a bad alternator?

Outside of the battery warning light, a dead battery is the most common symptom of a bad alternator. As the alternator can no longer supply your Ram with an adequate power supply, it will begin to feed off of the reserve in the battery.

Outside of the battery warning light, a dead battery is the most common symptom of a bad alternator. As the alternator can no longer supply your Ram with an adequate power supply, it will begin to feed off of the reserve in the battery.

What should the voltage be on Dodge Ram?

Set it to read voltage. Specifically, you’ll need to set it to 20V DC. With your Ram turned off, you’ll connect the negative side of the meter to the negative battery post or wire. You’ll then touch the positive side of the voltmeter to the positive battery wire.

What should I do if my alternator is not charging?

The alternator normally lasts longer than the battery. There are some easy steps you can go through to check the function of your alternator. Tap the alternator carefully with a hammer while the engine is runnin; if the charging goes back to normal, the coals inside it are worn out.

How can I tell if I have an alternator problem?

To differentiate an alternator problem from the battery, you will need to use a voltmeter to check for voltage. First, turn off the engine and check the battery voltage. A fully charged battery should have a reading of 12.65 volts. Next, turn on the engine and recheck the voltage. You should have a reading of 13.5 to 14.5 volts.

What kind of engine does a Dodge 5.2 have?

Dodge Engine 5.2 Specs. The term “Dodge 5.2” is shorthand for 5.2-liter Dodge engines. These eight-cylinder engines have been used by Dodge—a company under the Chrysler brand—since the mid-1980s.

What happens when you have a bad alternator in a Dodge Ram?

As described above, a bad alternator will drain your Ram’s battery fast. When the battery gets so dead it will no longer be able to power your Ram’s ignition system. As the ignition system is no longer able to produce a full powered spark, the engine will begin to sputter and stall.

Can you use an external voltage regulator on a 1987 Dodge alternator?

This kit can be used on Standard and High Output Alternators with External Voltage control. Also, this product can be used as a wiring harness and external voltage regulator replacement kit for any 1987 and earlier Chrysler Family vehicle alternator with dual insulated brushes.

Can a bad alternator charge at 14.3 volts?

Your computer may be broken in such a way that it does not keep the light out, but the , regulator by-pass kit will still get your GOOD alternator charging at 14.3 volts, regardless. However, Regulator Bypass kit will not make a Bad Alternator Start Working

What kind of wire does a 5.9 Cummins alternator use?

Applications: 1989-2002 Dodge Ram with a 5.9L Cummins We have added an optional W-Terminal or TACH pickup wire to this alternator. This option is only available on these “SE” Denso / dodge alternators that eliminate the PCM. When you select this option we will provide a tach lead for connection to a diesel specific aftermarket tach.

Where is the C3 connector on a Dodge alternator?

The connector closest to the passenger side is the Grey C3 connector. The Connector in the middle is the White C2 connector. Reference the wiring diagram at the PCM. We are concerned with pin 25 in the Grey C3 connector as it is the opposite end of the dark blue wire at the alternator.

Applications: 1989-2002 Dodge Ram with a 5.9L Cummins We have added an optional W-Terminal or TACH pickup wire to this alternator. This option is only available on these “SE” Denso / dodge alternators that eliminate the PCM. When you select this option we will provide a tach lead for connection to a diesel specific aftermarket tach.

The connector closest to the passenger side is the Grey C3 connector. The Connector in the middle is the White C2 connector. Reference the wiring diagram at the PCM. We are concerned with pin 25 in the Grey C3 connector as it is the opposite end of the dark blue wire at the alternator.

This is where the PCM lives behind your air filter box, notice I removed mine for better access, TURN THE KEY OFF before disconnecting. The connector closest to the passenger side is the Grey C3 connector. The Connector in the middle is the White C2 connector. Reference the wiring diagram at the PCM.

Can you use an alternator regulator on a Cummins Engine?

It provides steady voltage control in conversions utilizing the 1989-2002 Cummins engine and can be used in custom applications as well. A pigtail and wiring diagram are included in the kit.

What is Cummins sensor number on Dodge 5.9L?

Replacement automatic transmission output speed sensor for 1994-2002 Dodge 5.9L Cummins diesel trucks.Limited Lifetime WarrantyDorman part number: 917-602.. AIT aka Air intake temperature sensor. Cummins part number: 3918461.. This replacement fusible link is the protection for the power supply to your fuel shutoff solenoid.

How many valves are in a Cummins 5.9L engine?

The new 5.9L Cummins engine had 24 valves, or 4 valves per cylinder. The mechanical “P-Pump formally known as the Bosch P7100 fuel injection pump was replaced with a rotary electric VP44 injection pump. This injection pump is one of the most common 2nd Generation Cummins problems.

It provides steady voltage control in conversions utilizing the 1989-2002 Cummins engine and can be used in custom applications as well. A pigtail and wiring diagram are included in the kit.

What is included in the alternator regulator kit?

A pigtail and wiring diagram are included in the kit. 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010

Author Image
Ruth Doyle