Where is electric window relay?
Where is electric window relay?
On early 944s, the power window relay is located on the lower left side of the center console near the DME computer. On late model 944s, it’s located on the Central Electric Panel (G7). If your window problem is only on one side, the cause is most likely a bad switch, bad wiring, or a bad window motor.
Where is the power window relay located in a Chevy truck?
Location: Main Index » Forum Index » Trucks-Vans-SUV » 1973-1987 Fullsize Trucks, Vans, 1973-1991 Blazers, Suburbans » where is the power window relay located?? Post: where is the power window relay located?? (Topic#179911)
Is the 87 pin connected to the window relay?
You are correct, however the wiring is intentional. If the window motor were hooked up to the 87 pin, then it wouldn’t switch to a ground when de-energized and the motor wouldn’t have a complete circuit. In this setup, both wires are normally grounds until one relay is energized by the switch and powers the motor in one direction.
Where do I cut the wire for the window relay?
Placing them here puts them in the large void under the arm rest so they’re out of the way and downstream of the factory switches, so you have power going directly to the window motor. Then I cut the wires in the harness going to the window motor.
How does a power window relay switch work?
In this setup, both wires are normally grounds until one relay is energized by the switch and powers the motor in one direction. Activate the other relay and the polarity is reversed, and the motor turns in the opposite direction.
You are correct, however the wiring is intentional. If the window motor were hooked up to the 87 pin, then it wouldn’t switch to a ground when de-energized and the motor wouldn’t have a complete circuit. In this setup, both wires are normally grounds until one relay is energized by the switch and powers the motor in one direction.
What kind of wiring diagram do you need for Dodge Ram W?
I’ve got a Dodge Ram W that used to have the computer box that sits So I found an 85 Dodge Ram D with the simpler computer box and vacuum I just need a wiring diagram for the computer controlled style.
In this setup, both wires are normally grounds until one relay is energized by the switch and powers the motor in one direction. Activate the other relay and the polarity is reversed, and the motor turns in the opposite direction.
Placing them here puts them in the large void under the arm rest so they’re out of the way and downstream of the factory switches, so you have power going directly to the window motor. Then I cut the wires in the harness going to the window motor.
