What are torque specs for Dodge hub assembly?

Install ABS wheel speed sensor, brake rotor and caliper. 6. Install axle washer and nut. Tighten axle nut to 179 Nm (132 ft. lbs.). 7. Rotate axle several 5 to 10 times to seat the wheel bearing. 8. Tighten axle nut to final torque of 356 Nm (263 ft. lbs.). 9. Align nut to next cotter pin hole and install new cotter pin.

How do you install a hub assembly on a Dodge truck?

This is for a 2006 but I think it is close if not the same as a 2003. 1. Clean axle shaft and apply a thin film of gease to the shaft splines and hub bore. 2. Install axle shaft through the steering knuckle and into the differential side gears. 3. Install hub bearing in the knuckle. 4. Install hub bearing bolts and tighten to 202 Nm (149 ft. lbs.).

What kind of wheel hub bolts do I Need?

Wheel hub bolts stripped, bent or seized? These wheel hub bolts directly replace the original bolts on certain vehicle years, makes and models. 4,500 Lb. Axle; Dana 60 Axle; 4,850 Lb.

How big are the bolts on a Dodge Ram?

This article applies to the Dodge Ram (1994-2001). With all of the different types and sizes of bolts on your Dodge Ram, it can be frustrating trying to figure out what size you need when one is broken or missing. To avoid those headaches, we’ve put together a master list of bolt sizes for the second generation Dodge Ram.

How much torque does a ram lug nut have?

Ram Lug Nut Torque Specs Recommendations Make Model Year Range Torque RAM 1500 2013 – 2019 130 ft-lbs 2500 2013 – 2018 130 ft-lbs 3500 2013 – 2018 130 ft-lbs 3500 DUALLY 2013 – 2018 140 ft-lbs

How much torque does a hub bearing have?

Hub Bearing Torque Specification Guide 2010 Make year Model Front torque ft-lbs/Nm Rear torque ft-lbs/Nm

What should the torque be on a ram wheel?

If you are planning on installing a wheel on your Ram, it is important to be aware of the manufacturer’s recommended torque settings. Using the proper torque helps ensure that the wheel assembly is securely installed.

What is the torque spec for rear driveshaft bolts?

Need to put my rear driveshaft back on after replacing the ujoints. What is the torque spec for the 4 bolts that secures the shaft tot the rear pinion? Thanks. Don’t forget the loctite, better security than correct torque. Click to expand… Thank you! 85ft.lbs. is for the (all 3rd gen.) 1500 , and the 03 2500/3500 only .

What should the torque be on a Dodge wheel?

If you are planning on installing a wheel on your Dodge, it is important to be aware of the manufacturer’s recommended torque settings.

What are torque specs for Dodge hub assembly?