Why is my air conditioner not working in my Mazda 6?
Why is my air conditioner not working in my Mazda 6?
If the controls do not work correctly then the problem is probably with the control panel. If you cannot hear the sound that accompanies turning the air from low to high then the problem is likely with the blower motor. Get into the fuse box in a Mazda 6 from the interior of the car.
How to fix a Mazda that stalls at stop?
Remove the air hose from the throttle body. Disconnect the throttle body connector. Remove the throttle body from the intake manifold, with the water hose connected. Clean the throttle body on the air hose side using a soft, clean shop cloth, sprayed with engine cleaner (Mazda recommends their P/N 000-77-A86).
What happens if your car engine stops while driving?
An engine that stops all of a sudden will cause you to lose control of your vehicle to some degree, especially if you’re driving fast. You also won’t hear it running anymore. This can happen with old and new cars as well. There are all sorts of reasons as to why a car engine would stop suddenly while you’re driving.
What causes a car to stop in the middle of the road?
If you don’t have the right amount of transmission fluid in your transmission, then it can cause your engine to stop at any time while you’re driving since your transmission can overheat and result in damage to the gears inside.
Why does my Mazda 626 shake when idling?
I’ve got a 1999 Mazda 626 that shakes really badly when idling. It gets a little better when put into neutral, but not much. I’ve had two people suggest possibilities: This started happening in the last year or so. It started out being a mild shake when stopping at a stop light, but in the past 6 months or so it’s any time the car is not moving.
How does the Mazda i stop system work?
The Mazda i-stop is their version of engine start / stop technology. This system stops the engine when the vehicle has come to a standstill, then once you lift your foot off the brake, the engine automatically restarts to resume driving.
Why is my Mazda i-stop light not working?
Mazda i-stop Not Working 1 Mazda i-stop Amber Light. The system is deactivated by pressing the i-stop OFF button. 2 Amber i-stop Light Flashing. The amber / orange i-stop light flashes to indicate a fault with the system or a related component. 3 Mazda i-stop Green Light. 4 Engine Does Not Stop. 5 Engine Does Not Restart.
Why does my car not start when I Turn on the gas?
If the engine cranks but does not start, it may be caused by a tripped inertia switch. Switch the key to “ON” and the fuel pump should be heard running for a second or two. Listen at the gas filler if necessary.
What to do if your Mazda radiator fan is not working?
(Playback ID: Z51uG5rYWdc0b2x4) Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
Why are my coolant fans not running when AC is turned on?
Coolant fans not running when ac is turned on. AC compressor clutch engage then it will disengage. System has freon in it. It was working find but now nothin7. My car has 234565 miles. My car has an automatic transmission.
What kind of radiator hose does a Mazda use?
Mackay Top Radiator Hose to suit Mazda E Series E1800 1.8ltr F8 2002-2006 *Mackay* Mackay Top Radiator Hose to suit Mazda E Series E2000 2.0ltr FE 1991-1997 *Mackay* Bottom radiator hose to suit 01/1999 – 09/2002 Ford KN KQ Laser or 09/1998 – 06/2002 Mazda BJ 323 Astina/Protege 1.6ltr ZM models
Why does my Mazda 6 fan controller fail?
However, these modules are common on earlier models as well. Also note on controller failure symptoms. Sometimes the modules will fail because the fans are the root cause of the problem, so it would be wise to verify the fans are in good working order before you replace the module.
(Playback ID: Z51uG5rYWdc0b2x4) Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
What was the problem with my Mazda 6?
Turns out this is a very common problem with all first generation Mazda 6 cars: The Fan Control Module (FCM) has a high failure rate. I replaced my FCM and it solved this problem.
Coolant fans not running when ac is turned on. AC compressor clutch engage then it will disengage. System has freon in it. It was working find but now nothin7. My car has 234565 miles. My car has an automatic transmission.
