Why is the low beam light out on my Dodge Ram?

I swapped the known good bulb from the other side and the low beam was still out, even though the high beam and fog lights were all functional. I started researching other causes for the issue and discovered that 2006 and later model year Dodge trucks have no fuses nor relays controlling power to the lights.

Why is my Dodge Grand Caravan not working?

The buttons that open the passenger side slider door weren’t working. The door could only be opened by pulling the handle, then the electric slide function did the rest. The dealer said it ended up being a part and a programming issue. The cold weather has revealed that 4 of the wires in the rear window defroster are not functioning.

Why are the warning lights on my car not working?

One or more dashboard warning lights don’t work. If one or more warning lights fail to illuminate when you first turn the key on, it usually indicates a blown bulb. If none of the lights come on at all, check the fuses and wiring to the instrument cluster first.

What are the front lights on a 2006 Dodge Ram?

To make the job harder on yourself, here are the 2006 Dodge Ram Front Lighting Wiring Diagrams. If you are so inclined, have at it. The only challenge I encountered was tracking down the correct wires at the wiring harness. The mechanic’s note read, “Jump the white and tan wire in black box to the white and green wire in blue box.”

Why are the brake lights not working on my Dodge Caravan?

If your Caravan’s brake light switch checked out ok, and there are no brake lights illuminating at all, inspect the wiring harness going from the brake switch to the bulbs themselves. There could be an issue with frayed wiring, wiring that has lost its ground, or a short/open situation.

What should I do if my caravan light is not working?

If it is just one light that doesn’t work, it is a simple task to remove the light unit lens and check the bulb. For guidance on removing any of the bulbs on your caravan, have a look through the owners handbook as there is usually a section on changing bulbs. Most handbooks also have a chart of what the correct wattage each bulb should be as well.

When is the not working inspection on a Dodge Grand Caravan?

Dodge Grand Caravan Rear lights are not working Inspection at your home or office. Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM. Our certified mobile mechanics can come to you now. Dodge Grand Caravan Rear lights are not working Inspection costs $89 on average.

What are the pins on a caravan road light?

Even if you know which circuit isn’t working, it’s always best to work in a logical order. Start with pin 1 – Left hand indicator. This is the positive (+ve) cable to the lightbulb, so we also need to connect to the negative (-ve) or “earth” for that circuit.

Why is my headlight not working on my Dodge Ram 3500?

If you have a Dodge Ram 2500 or 3500 pickup truck and are struggling with a low beam headlight that won’t work on one side, this post will help save you from a costly trip to the dealer to troubleshoot and replace your TIPM (Totally Integrated Power Module). First, let me explain what I’m talking about and allow me to vent for just a moment…

Where is the low beam on a Dodge Ram 1500?

2004 Dodge Ram Low beam out on passenger side. Changed the bulb, changed the plug to bulb, noticed that this has happened before with this truck by the way the wiring had been cut into and traced throughout the harness. What worked for me was to unplug the FMC and plug it back in with the battery still hooked up..

Why is my low beam headlight not working on my Dodge Ram?

After replacing the driver’s side headlight bulb twice on our 2006 Dodge Ram 2500 SLT 4WD Cummins Diesel pickup, the low beam still wasn’t working. I swapped the known good bulb from the other side and the low beam was still out, even though the high beam and fog lights were all functional.

How much does a headlight bulb cost for a Dodge Ram 1500?

The best part is, our Dodge Ram 1500 Low Beam Headlight Bulb products start from as little as $11.03. When it comes to your Dodge Ram 1500, you want parts and products from only trusted brands.

What to look for in a Dodge Ram 1500?

When it comes to your Dodge Ram 1500, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Low Beam Headlight Bulb product and part brands so you can shop with complete confidence.

Why is my headlight not working on my Dodge Ram?

First, let me explain what I’m talking about and allow me to vent for just a moment… After replacing the driver’s side headlight bulb twice on our 2006 Dodge Ram 2500 SLT 4WD Cummins Diesel pickup, the low beam still wasn’t working.

How does a low beam headlight work?

When you turn on the headlights, the wires to the low beams return a signal to the ECM (Engine Control Module) which sends power to the lamps.

Where to get a low beam headlight bulb for a Dodge Ram 1500?

If you prefer to shop in person for the right Low Beam Headlight Bulb products for your Ram 1500, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time! Use the fitment form at the top of the page to select your exact year and engine type for your Dodge Ram 1500.

Can a front door stereo be replaced in a Dodge Ram?

If you’re replacing the factory radio, you can connect your new stereo to the factory Infinity amp — you should get a little boost in performance but the speakers will continue to work as they do now. You can replace most of your speakers, but again, the front door speakers will only produce bass.

Why are my headlights not working in high beam?

If just one bulb fails to work in either high beam mode or low beam mode, it may be the bulb. Most headlight failures that are limited to just high or low beams are related to a relay or the high beam control switch.

Do you need to replace both high and low beams?

Some vehicles use a single bulb for both high and low beams while others do not. If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.

Why do my low beams come on and off?

If you’ve noticed that your low beams come on and off whenever you tilt the steering wheel, this is why. Remove the steering column cover. It’s held by screws on the top and bottom and it should come apart in two pieces. Unscrew the lever for the tilt adjuster. Look for a wire that’s been pulled from the headlight switch harness.

Is the brake light on my Dodge Ram working?

This was a major update including an all new frame, suspension, powertrains, interiors, and sheet metal. I have a Dodge ram 1500 2007 yesterday my brakelights and turn signal stopped working I have changed the bulbs checked the fuses the tail lights work also the third llight is working front turn signals blinking fast.

Why is the 4WD light blinking on my Dodge Ram?

One of the reasons why the 4WD light on your Ram is blinking could be that the 4WD transfer case shifter (or button) is stuck between gears.

Why is the FOB on my Ram 1500 stuck?

Won’t turn to off position 2014 ram 1500 key fob is stuck. Won’t turn to off position and won’t start … read more Vocational, Technical or Tra…

Why does my Dodge Ram 1500 have no power?

Now the truck has no power at all. Battery and Alternator test good. Key wi … read more 2006 Dodge Ram 1500- Turn key to start-nothing happens. Keep turning key- eventually it will start. Happens 2-3 times a week. Lights ,gauges, power windows…. all work but engine wont turn over. Batt … read more

Why does the 4 wheel drive light stop flashing?

The transfer case neutral position needs to be selected before you attempt to engage 4WD. The selected position indicator light will flash until the transfer case completes the shift. When the shift is complete, the indicator light for the selected position will stop flashing and remain ON.

Why are the lights not working on my 2010 Dodge Ram 1500?

No one has added a helpful site for this 2010 Ram 1500 problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: The drivers side headlights went out, both high and low beams. Went to the mechanic and had bulb replaced and still nothing. They tried to do a reset with the battery cables and still nothing.

When you turn on the headlights, the wires to the low beams return a signal to the ECM (Engine Control Module) which sends power to the lamps.

How does auto high beam work on 2018 Dodge Ram?

If auto high beams is selected in Uconnect and the stalk is forward then the auto high should work. On my 2018 I get a message on the dash when pushing the stalk forward and the high beams revert to low beam when vehicle speed is about 10mph or slower.

Why is my low beam light not working?

My low beam went out and I thought it was the bulb. I replaced both bulbs and turned the lights on and I still am unable to get the light to work. I tested the light socket and there is power to it when I turn the lights on. When I re-plugged the bulb back in it, it does not work.

Why are the headlights on my Dodge Ram 1500 not working?

Be the first! Read reviews of repair shops in your area. Enter your zip code: The drivers side headlights went out, both high and low beams. Went to the mechanic and had bulb replaced and still nothing. They tried to do a reset with the battery cables and still nothing.

What to do if your high beam light is not working?

Check your owner’s manual to be sure which kind of high beam bulb you need and get familiar with the fuse box in case the high beams stop working. Finally, practice using a digital multimeter so you can rule out electrical problems before replacing other components. A blown high beam headlight bulb, an easy fix.

Why are my high beam lights not working?

On some vehicles, particularly those with HID headlights or solid-state circuit protection (Zener diodes or high beam circuit breakers) installing the wrong bulb might result in intermittent headlight operation or no high beams at all. The wrong bulb might not ignite at the right voltage or draw too much current for…

What’s the problem with my Dodge Ram 1500?

2000 Dodge Ram 1500 pickup. When tryed to put on high beams headlights would go out, after a couple of attempts they would come back on. Replaced high beam switch on column and now the high beam indicator light on the dash stays on all of the time and the low beams appear to be very dim.

What kind of headlights does a Dodge Ram use?

Early 2nd gen Rams used a pull switch to control the headlights that was unfortunately prone to shorting out on itself. Later rams switched to a more modern rotary switch. Both switches are prone to problems with the connectors, but replacing them is not too difficult. Tilt your steering wheel down.

Why are the low beams on my Dodge Ram not working?

I started researching other causes for the issue and discovered that 2006 and later model year Dodge trucks have no fuses nor relays controlling power to the lights. When you turn on the headlights, the wires to the low beams return a signal to the ECM (Engine Control Module) which sends power to the lamps. Really?

Are there any problems with the Dodge Ram 1500?

Fourth-generation Dodge Rams are more powerful than these trucks have ever been, yet they’re still susceptible to issues that can make them dangerous to drive. Electrical issues are unfortunately common in late-model RAMs and are some of the worst 2010 RAM 1500 problems. 1. TIPM Issues

How do you change the light bulb on a Dodge Ram?

Twist the locking ring counter-clockwise then pull it from the headlight housing. Pry off the electrical harness clip and pull the bulb from the socket. Insert the new bulb to the socket. Reinsert the bulb socket to the headlight housing and twist the ring clockwise to lock it in. Figure 1. headlight bulb socket.

Is it possible to fix a bad low beam headlight?

Fortunately, fixing a bad low beam is a straight forward process in the majority of vehicles that can be done by most people without just a few hand tools. If replacing your headlight bulb does not work, there may be an electrical issue in your vehicle that should be addressed by a professional. Identify a blown out bulb.

Is there a problem with my Dodge Ram 1500?

I HAVE A 2001 DOGE RAM 1500 PICKUP AND OVER THE PAST YEAR OR SO THE HEADLIGHT/DIMMER SWITCH HEATS UP AND LATELY I CAN SMELL AN ELECTRONIC SMELL LIKE SOMETHING HEATING UP. HEADLIGHT AND DIMMER SWITCH ASSEMBLY WE REPLACED TWICE (SHOP ONCE LAST TIME…SAID THAT WAS THE PROBLEM BUT WASNT).

What are the different colors of RAM warning lights?

They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 70 of them so be patient! Models examined include 1500, 2500, 3500, Chassis cab, Promaster, and Cargo Van.

What kind of Lights does a Dodge Ram have?

We have lights that feature smoke lenses, chrome reflectors, LEDs, and other designs you can’t get from the factory. Some of these customizations enhance visibility, allowing you to see better, and making your truck easier to spot.

How much does a ram tail light cost?

Pick Up In-Store. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Your Ram is a full-size pick-up that offers plenty of performance for towing and hauling, even under the most rugged conditions. Tough as it may be, you want to maintain your truck’s attractive appearance.

Why are my bi-xenon HID low beams not working?

2. My HID Bi-Xenon high beams or low beams are not working or are inverted. This is a similar issue as above, the polarity of the connector’s pins are not correctly aligned. Bi-Xenon HID kits have 3 pins on the harness connector for ground, low beam and high beam connections. You will need to release the pins inside the connector and reorder them.

Why does my hid kit only turn on one side?

Only one side is working on my HID kit or LED kit. If one side sometimes doesn’t turn on it could be caused by a bad bulb, HID ballast, LED driver or wiring. To help identify which component is defective follow these steps. Swap the ignitors to opposing sides (not applicable for LED kits).

Where are the pins on the bi xenon HID kit?

Bi-Xenon HID kits have 3 pins on the harness connector for ground, low beam and high beam connections. You will need to release the pins inside the connector and reorder them. You may need several tries to find the proper orientation. Look inside the connector and with a precision screwdriver you can release the pins and reverse the wires. 3.

What can cause a low beam headlight to be dim?

If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks! What can cause the light to be dim except when on the high beam setting?

Why are the headlights on my Dodge 2500 not working?

I have a 99 dodge 2500, the headlights at low beam will not work, but the high beams will if I hold the switch just right. I have replaced both switches, but it doesn’t help. (The headlight switch was listed as a 2000 switch). Someone told me about a “ground control module” that may need to be replaced??? It has been 5 months.

What kind of light bulbs does Ram 1500 use?

The Philips are what I have ran in all my 3 of Ram 1500. I have been very pleased with the results. I hated the stock halogen lights. Incredibly weak. I live in the city and when driving on city streets I couldn’t even tell they were on.

Why are the headlights not working on my Dodge Ram 2500?

The contact owns a 2004 Dodge Ram 2500. While operating the vehicle, both the high beam and low beam headlights would not illuminate. Also, the rear driver’s side window would not operate due to damaged electrical wires located in the driver side door panel.

When do I need to replace the light bulb on my Dodge Ram?

When you need to replace the headlight, turning signal or parking light bulb on your Dodge Ram, finding out what the replacement size you need can be a time consuming task.

Which is the best auxito bulb for Ram 1500?

With the launch of the latest RAM 2500 3500, we expect better lighting to come out of RAM 2500 3500 soon. At this moment, the AUXITO team will wo… With top-quality LED bulb upgrades for RAM 1500 available on Auxito, you now have the option to improve the stock lighting of your 2019-2020 RAM

How big are the lights on a Dodge Ram 3500?

For 2016 – 2018 Ram 2500 3500. There’re two types of assembly, reflector, and projector. We put together the complete kit for both two types of a… 7440/7443 Backup Reverse Lights bulbs for Head Lamp w/Projector: DC 12V 24V, Power:9.6w/pc, Current:800ma, Lumen:1400LM/bulb, Color:6000K Xenon W…

What did right side low beam and high beam go out?

Right side low beam and high beam went out. Looked at both bulbs, they looked fine. Checked fuses, couldn’t find specific fuses for headlamps. Found one that seems to have include the high beam, but didn’t find a fuse for low beam. Anyway, fuses look fine.

What did the bulbs go out on my 2014 Ram?

2014 Ram 1500. Right side low beam and high beam went out. Looked at both bulbs, they… 2014 Ram 1500. Right side low beam and high beam went out. Looked at both bulbs, they looked fine. Checked fuses, couldn’t find specific fuses for headlamps.

What kind of headlights does a Dodge 1500 have?

The contact owns a 2007 Dodge Ram 1500. While driving approximately 45 mph, the driver side low beam headlight failed to illuminate without warning. The contact also stated that the driver side high beam light would not illuminate unless the contact held down the high beam control.

Why are the high beams on my car not working?

If the high beams function but don’t seem to light your way, especially if you drive an older vehicle with polycarbonate headlight lenses, your car may be a victim of headlight fogging. This isn’t simply scuffing, but an actual chemical change from polycarbonate’s exposure to solar ultraviolet light and caustic exhaust emissions.

Where are the head light relays on a Dodge Ram?

Just push in the tabs on the side of the cover and remove it, there’s a diagram showing what each fuse and relay go to. Yea I checked the diagram on the inside of the fuse box cover but couldn’t find an actual head light relay.

Is the high beam light on the dash stock?

Yes everything is stock. High beam indicator does not light up on dash either The relay is in the fuse box next to the battery. Just push in the tabs on the side of the cover and remove it, there’s a diagram showing what each fuse and relay go to.

Is there a CD player in a Dodge Ram?

Most any dodge product ( cars,trucks,minivans,jeeps) from 94-01 will have had one of those 3 radios in it. I have a stock radio laying around here somewere, cant remember if it is the tape player or not,but I know it doese not have the CD player.

Is there a problem with my Dodge Ram V10?

The crossovers are known to go bad.I have heard of people pulling the speaker and bypassing the crossovers for a cheap fix. This would tell you if it is the speaker itself or the head unit. Well, I own a 1999 Town and Country with the same radio, so I may switch radios and see what happens…

Where are the amps on Dodge Ram V10?

This just helps them stay clear when the volume is turned up.Even with the Infinity system the main power amp is in the head unit, although it is only pushing 8-12 watts (if I remember right) then the amps on the speaker take over and “boost” the wattage up.

What kind of headlight do I need for Dodge Ram?

Outlaw Lights 9007 LED Headlight Conversion Kit is designed to replace the high beam and low beam factory halogen bulbs on 1999-2005 Dodge Ram trucks. LED Headlight Conversion Kits from Outlaw Lights replace the stock halogen headlights on your car, truck, Jeep or SUV.

Why are the low beams not working on my Dodge Ram?

The low beam works fine when the truck is off, but when the truck is turned on the low beams flash like 2 or 3 times and then do not work. I do however still have high beams. Could the daytime running lights cause this?

Are there any problems with the Dodge Ram 2500?

Dodge Ram 2500 owners have reported 36 problems related to headlights (under the exterior lighting category). The most recently reported issues are listed below. Headlights shut off while driving at random times at night causing complete inability to see on the freeway or back road where there are ditches and things to wreck.

Why are the lights not working on my Dodge truck?

This is a known issue on the 94-98.5 trucks with the push/pull headlight switch. The fix is a new switch (may be the same switch) but an extra harness that bypasses the switch itself with the full voltage. I believe there is a relay that uses the switch to activate power direct to the lights.

When to change HighBeam bulbs on Ram 1500?

Highbeam bulbs grow dimmer by over 20% over time, therefore we recommend changing both bulbs on your 1500 at the same time, even if only one is burnt out – this will allow both highbeam bulbs to have the same brightness. Be careful not to touch the glass part of the new highbeam bulb with your finger when changing it on your 1500.

What’s the correct year for a Dodge Ram headlight?

Please ignore the fact that the site, for whatever reason, selected a 2020 Ram 1500 for the low beams and a 2019 Toyota Highlander for the high beams. I did indeed select the correct year, make and model of my truck and I’m quite confident that is the right bulb size for each.

What are the warning lights on a ram?

The following are warning lights and indicators found in vehicles built by Ram. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 70 of them so be patient!

Why are the fog lights not working on my Dodge Ram?

I have the headlights on when I push the button for the fog lights and the dash light comes on showing the fog lights are on but when I go in the front of the vehicle the bulbs are not lighting up. I have the hight beams off and it is the regular driving lights on.

Are there any running lights on my Ram?

All of the lights used to work but now just the running lights have stopped working. I looked at all of the fuses and tested the plug. I am not getting power to the running light pin.

Why are there no brake lights on my Dodge Ram?

The brake light switch can wear out, which translates into no brake lights on your Dodge Ram. If the bulbs as well as the connections are good and the wires are properly grounded, replace the switch. You will find it under the brake pedal.

Where are the flasher relays on a Dodge Ram?

Refer to the inside sticker of the fuse box panel and locate the two flasher relays. Switch the relays, and check if the turn signal lights are flashing. If one or both of the relays fails to turn on the turn signal light, replace as needed. Figure 2. Flasher relay.

What kind of lights do Dodge Laramie headlights use?

The LED turn signals in the Laramie headlights are very nice compared to the quad incandescent bulbs. The projectors on the Laramie headlamps work well with an HID conversion. The reflector construction of the quads doesn’t. The LED turn signals in the Laramie headlights are very nice compared to the quad incandescent bulbs.

What is the DRL on a Dodge Ram?

all rams have the DRL option, if your ram doesnt have it turned on the dealer will have to activate it, typically the DRL on the Laramie headlights is the LED signals and the DRL on the quads is the low beam headlight… neither Ram came with HIDs factory but HIDs do work very well in the Laramie projector headlight… DRkNESS likes this.

Is there a problem with my low beams?

I have a Gen 4. I have checked all of my fuses just to make sure they were all good. My low beams do not work at all. However, my high beams work fine. If i have the low beams turned on, there is nothing. When i turn on the high beams, they work fine. Heres the wierd part though.

Why are headlights not working but high beams are?

Corrosion, a bad ground, or some other issues can damage the sockets and disrupt the power flow to the bulbs. If only the sockets of the low beams are bad, it will cause headlights not working but high beams are.

Why are my low beams not working on my Mercedes?

When it burns out it will stop suppling power to whatever lights it wants to. Multimeter the socket, no power replace the relay/check fuses of course. Suggest junk yard new they are about 200. The headlights on my 88 260E would turn OFF when I switched from high beams to low beams. Very unsettling the first time it happened.

Is the low beam still working but high beams are not?

Low beams still out, but high beams work. Based on questions on line, this seems to be a problem that happens with Mercedes. What do I check next to correct the problem?

Why are my low beams not working on my 88 260E?

Suggest junk yard new they are about 200. The headlights on my 88 260E would turn OFF when I switched from high beams to low beams. Very unsettling the first time it happened. If I fiddled with the beam change lever the lows would come on so I knew the problem was the steering column switch. I bought a new one and all ws well again.

Can you drive with only high beams on?

Not practical to drive at night with just high beams. The closest dealer is 90 miles away. Both low beams went out at night on the road. I discovered later that the high beams work. I checked fuses. No problem. I bought and installed bulbs in each light one at a time and tried the lights. Low beams still out, but high beams work.

Where are the fog lights on a Dodge Ram?

Run the fog lights wires from the relay (included in the fog light kit) to the fuse box, and then to the switch and the battery for power. Don’t forget to reconnect the battery before testing the lights. Figure 4. Fog light wiring diagram.

Can a Dodge Ram 1500 have fog lights?

Does not fit a 2005 Dodge Ram 1500; the adapter to plug into the OEM harness does not match up. See pic included. They work on a 2500 as well. It took a few minutes to figure out how to run the wires like they should be as my truck never had fog lights to begin with.

Are there any problems with the Dodge Ram?

See all problems of the 2012 Dodge Ram 2500 . The headlights on this model Dodge ram (2500 slt mega cab) do not provide adequate illumination at night. My headlights are adjusted properly for alignment by the dealer but the bulbs just do not provide enough light ahead or to the side of this vehicle.

Why does my Dodge Ram cut off after filling up?

I have a 2008 dodge ram 1500 5.7 hemi. When I fill up with gas the engine cuts off within 10 miles of driving. It is acting like it is starving for fuel. I went to the dealership and they had no answer. I tried a new gas cap but that didn’t work. Could it be the throttle position sensor?

We have a dozen or so of 2007-2008 dodge ram 1500 with the 4.7L and 5.7L One of the trucks came in this week with a stalling and bucking problem. It threw the codes P0655, P0688, P2112. These are ASD control circuit codes and accelerator position sensor 1 codes.

Why are the lights flickering on my Ram 1500?

The dash usually one do it when they are dimmed was down, so im assuming its the dimmer switch. Yes.. There is a flash for it. Just had it done last week and still have my headlights flicker every now and then. The dash usually one do it when they are dimmed was down, so im assuming its the dimmer switch.

Why are the lights on my AM 15 larimie flickering?

Started flickering this am 15 larimie with 19k. Read it as being a problem back back in 13. If you turn them up flicker goes away. My dealership always needs a apointment just to look at truck.

Why are the lights on my dash flickering?

There is a flash for it. Just had it done last week and still have my headlights flicker every now and then. The dash usually one do it when they are dimmed was down, so im assuming its the dimmer switch. Click to expand… The dash lights are dimmed using PWM.

How many miles does a hemi 1500 Hemi have?

It has about 48,000 miles on it. Funny thing is I had 2013 1500 Outdoorsman (hemi) that had a full suite of electrical issues and the dash light flickering when dimmed to the lowest setting was one of the issues.

What causes the Horn to go off on a Dodge Ram?

The Totally Integrated Power Module (TIPM) is a huge issue for many with a modern Dodge Ram pickup. When it starts to go, it wreaks havoc on any and every function that requires electrical input. When the TIPM starts to go out: Airbags may not deploy in a crash and/or may deploy at random. The horn may go off at random.

How to reset the Check Engine light on a Dodge Ram?

Dodge Ram: How to Reset PCM and Check Engine Light. 1 Step 1 – Remove the PCM fuse. First, park your truck and turn it off. Pull the hood lever under the driver’s side dash, and then pull the safety catch 2 Step 2 – Reset the PCM. 3 Step 3 – Re-install the PCM fuse. 4 Related Discussions.

What kind of lights can I put on my Dodge Ram 1500?

Add auxiliary and off-road lights, plus parking and fog lights, or light-up door sills to customize your ride further. We also have a huge selection of replacement light bulbs.

What kind of light does a Dodge Ram 3500 use?

05 Ram 3500.. Any other truck info doesnt mean snot.. If your using LED upgrade. You need a resistor, 25w 6ohm. If not, then it’s a small ground short or like the guys said probably just a bulb on its way out.

Why is the low beam light out on my Dodge Ram?