How do you disable the seat belt chime?

How do you disable the seat belt chime?

Please try again later. Turn the vehicle to the on position by either turning the key to the on (without starting it) or hitting the push to start button twice without touching the brake pedal. Buckle and unbuckle the seatbelt twenty (20) times in thirty (30) seconds. The seat belt chime is now disabled. How long is it disabled for ?

How to disable the seat belt alarm on a Dodge Ram?

Fasten and unfasten your safety belt three times within one minute of turning the vehicle to the “on” position. Then fasten the seat belt one last time. Turn the key to the “lock” position. You should hear the bell chime one time. This is an indication that the Ram’s BeltAlert system has been turned off.

How to turn off the seatbelt chime in a Ford F150?

Turn to page 44 in your Ford F150 manual (don’t know if this works on older models.) Note the two front seats must be done independently. And this won’t work if you’re using a Ford MyKey. 2 – wait about 1 minute until seat belt warning light goes off.

How to turn off the seat belt warning / chime on a Dodge Grand Caravan?

After much reading on the web and a lot of trial and error, I have finally figured out how to turn off the annoying chime the Dodge minivan makes when you don’t buckle your seat belt. This works with my 2007 Dodge Grand Caravan, but other years and model Dodge cars will probably work as well.

How to turn off the seat belt warning / chime on a Dodge?

Pull a bunch of seat belt slack out so you can have some room to work. Turn the key to the on position (you don’t need to start the car) and wait for the seat belt warning light to turn off. Unbuckle the seat belt, and wait for the seat belt warning light to go on.

When to turn off the seat belt chime?

The chime is especially annoying if you are just driving the car into the garage at night or driving slowly in a parking lot or around your neighborhood. Only the chime will be turned off, the seat belt warning light will still work as it always did.

How to turn off the seat belt warning?

Unbuckle the seat belt, and wait for the seat belt warning light to go on. Buckle the seat belt and wait for the seat belt warning light to go off. Repeat the above two steps, buckling and unbuckling the seat belt 2 more times ending up with the seat belt buckled. Be sure to wait for the light to turn on or off each time.

What does the belt chime do on a Dodge Charger?

Turn the ignition switch to any position except On or Start to toggle the beltminder feature from its current setting (from active to inactive, or from inactive to active). A single chime tone will provide an audible confirmation that the programming sequence has been successfully completed.