Other

What does high pressure in AC system mean?

What does high pressure in AC system mean? If your AC pressure is persistently too high, it points to an underlying issue. When the pressure of the AC system is too high this might indicate a leakage or diminishing amount of refrigerant, both of which require immediate attention. What should AC low side high side low pressure be? On the other hand, there is possibly a huge leak when the pressure is zero. AC Low Side High, High Side Low: Why Does This Happen? The pressure reading from the low side should be between 25 and 30 psi and the...
Other

What power tool is used to remove bolts?

What power tool is used to remove bolts? Wrenches are used to tighten and loosen fasteners, mainly nuts and bolts. Wrenches are generally made from a chrome-plated steel alloy. The material makes wrenches both durable and simple to clean. Can you remove a bolt with a wrench? In most cases, you can remove a bolt by unscrewing the nut from the bolt with a wrench. If the bolt is rusted or otherwise stuck in place, however, you'll need to find another way to remove the bolt. In some cases, truly stuck bolts cannot be removed and need to be cut...
Easy tips

What does it mean when your RPM light comes on?

What does it mean when your RPM light comes on? Normally, having the low RPM warning light come on while you're flying straight and level means you're engine has stopped working. Not all warning lights indicate a massive, immediate problem with your car. Either your fluid is low, or there is a malfunction occurring in your brake system. When does the warning light on my car turn on? Indicator light usually accompanied by another warning light and indicates that one or more warning systems have been detected. Click Indicator light will turn on when a new message is stored in...
Easy tips

What are the parts of a leaf spring?

What are the parts of a leaf spring? Leaf Spring Bumper.Leaf Spring Bushing.Leaf Spring Hanger.Leaf Spring Shackle.Load Cushion.Nut.Nuts / Bolts.Rebound Bolt. What parts are needed to replace leaf springs? Many leaf spring hardware kits have everything you need to replace the entire suspension, including:Hangers.Shackles.Bushings.Center bolts.Spring pins.Cross bolts.Lift blocks. Is a broken leaf spring Dangerous? There are numerous dangers associated with damaged leaf springs. At worst, a broken leaf spring could turn your truck into a roadside danger. Failed rear suspension: Driving with a broken leaf spring bracket will inevitably place undue amounts of weight and pressure on the vehicle's rear...
Common questions

What direction should shadow face?

What direction should shadow face? At exactly noon, the stick's shadow (or your shadow) will point due north because the sun is due south. So even with a digital watch, you can find north at noon. At any other time of day, a shadow is at some angle away from north. The size of the angle changes with the motion of the sun. What direction do shadows fall at sunset? At the time of sunset the shadow of an object is always in the east. If a man stands facing the North, at the time of sunrise his shadow will...
Common questions

Is it hard to drive a Mercedes Sprinter?

Is it hard to drive a Mercedes Sprinter? While the Sprinter van is remarkably agile and easy to drive for such a big vehicle, it doesn't feel planted like a sport sedan. It's noisy. And unloaded, it bounces down the road because the suspension is set for cargo. That settles down as more weight is loaded into the van. Can a Sprinter van pull a trailer? The Mercedes-Benz Sprinter has a towing capacity of 5,000 pounds to 7,500 pounds, depending on the configuration. That puts the Mercedes-Benz Sprinter a considerable step ahead of many competing vehicles in its class, such...
Most popular

How do you program a new key fob for a 2005 Jeep Grand Cherokee?

How do you program a new key fob for a 2005 Jeep Grand Cherokee? 2005 Jeep Grand Cherokee Key Fob Remote Programming InstructionsPress LOCK button 5 times at 2 second intervals to resynchronize remote.Insert key into the ignition switch. Using the working remote, press and hold the UNLOCK button on the remote. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button. How much does a new Jeep car key cost? Getting a new key and key fob replacement for your original set at the dealership will range from $120 to $250 (and occasionally more depending on the...
Easy lifehacks

Where do I find the radio security code?

Where do I find the radio security code? If the radio display indicates "CODE" or "OFF," then the radio security code must be entered into the radio in order for the radio to work. When you purchased your vehicle, you should have received a card that lists the four-digit security code for the radio. DON'T HAVE YOUR CARD? That's OK. Is there a way to reset the radio code? Depending on the type of radio you own, they might be able to reset the stereo code for you. Once you’ve received the security code, it’s relatively easy to enter the...
Other

Does AutoZone run diagnostics?

Does AutoZone run diagnostics? Does AutoZone Scan Check Engine Lights? AutoZone does. If your light is on, and you are wondering why, head down to your local AutoZone where one of our store associates can help diagnose the issue through our free Fix Finder service. How does AutoZone do the diagnostic work on your car? Enjoy unlimited reading and listening on any device. The “diagnosis” that Autozone provides isn't really a true diagnosis. Autozone uses an Actron (or similar) OBD II scanner to read the codes stored in your vehicle. They then use a database to link the MOST LIKELY...
Easy tips

How do you install an external fuel pump?

How do you install an external fuel pump? Let’s say that you install the pump and plumb a large delivery fuel line and also install the proper fuel pressure regulator. We’ll also assume you have created a return system using the original fuel line. This would also require installing a return bung it the stock sending unit. All of this is relatively easy. Where is the fuel pump on a car? The pump was located in a convenient recess in front of the tank. The existing stud and hole suggest an external pump must have been fitted originally and the...