Other

Do you need a relay for nitrous?

Do you need a relay for nitrous? A properly installed, single-stage nitrous system should be wired from the battery through a fusible link to safeguard against unexpected power surges. Once the electrical current travels through the fusible link it can be routed to the relays. One relay should be used for each solenoid. How do you set up a nitrous system? How to Install Nitrous OxideStep 1: Mount the Bottle and Brackets. Find a safe location to mount the nitrous bottle. Step 2: Install Nitrous Line. Step 3: Remove the Carburetor. Step 4: Set Up the Nitrous Plate. Step 5:...
Most popular

When to replace AC compressor in Ford Freestyle?

When to replace AC compressor in Ford Freestyle? Restores low RPM AC performance for around-the-town driving. This fix has saved Ford Freestyle owners hundreds of dollars in needless, yet often recommended, AC compressor replacement. The subject vehicle is a 2006 Ford Freestyle. Where is the AC control valve on a Ford Freestyle? Pop the hood of a 2005-2007 Ford Freestyle, Ford 500, or Mercury Montego and you're looking at a 3.0L V6 DOHC 24V DURATEC engine. This was the one and only engine option for these vehicles. The AC Compressor Control Valve is located behind a backing plate on the...
Other

Does a 2007 Ford Edge have a timing belt or chain?

Does a 2007 Ford Edge have a timing belt or chain? Ford Edge Timing Overview (All Model Years)ModelYearsTiming Belt Or ChainFord Edge2007 to 2020timing chain What kind of car is a 2007 Ford Edge? Description: Used 2007 Ford Edge SEL Plus with AWD/4WD, Tire Pressure Warning, Audio and cruise controls on steering wheel, Stability Control, Heated seats. CLEAN VEHICLE IN AND OUT. What should my maintenance schedule be for my car? Use the maintenance schedule outlined here as a starting point, but know that it's also a good idea to consult the owner's manual for each of your vehicles to...
Easy tips

How to tell if brake caliper is seized?

How to tell if brake caliper is seized? Regardless, you're sure to experience one of these signs when you have a seized brake caliper.Your Car Slows Down By Itself. Your Car Shifts One Side While Braking. Heat Coming Off The Wheels. Unusual Grinding Noise When You Match The Brakes. Bad Fuel Economy. Brake Fluid Leaks. Why are my brake calipers not releasing properly? Water and other dust can come into the handbrake wires and cause them to rust. This will cause the brake calipers not to release properly when you release the handbrake. To fix this, you can try to...
Other

What does the wrench light mean on my 2010 Ford Fusion?

What does the wrench light mean on my 2010 Ford Fusion? The owner's manual is going to tell you that the wrench light is simply a “check engine” light meaning there is a fault code stored by the car's onboard computer. It is okay to drive it until you can set up an appointment for any Ford dealer to scan the car for fault codes and fix it under warranty. Where is the wrench icon on my Ford Fusion? Diagnosing “wrench icon” on 2010 Ford Fusion Hybrid: will OBD2 scanner help me? On my 2010 Ford Fusion Hybrid, I frequently...
Easy tips

Does the Ford Fusion Titanium have a turbo?

Does the Ford Fusion Titanium have a turbo? Fusion Titanium ($34,340) has the 2.0-liter turbo-4. Are there any problems with the 2015 Ford Fusion? The 2015 Ford Fusion has 627 problems & defects reported by Fusion owners. The worst complaints are engine, accessories - interior, and electrical problems. How often does a Ford Fusion shut off while driving? The car shuts off while driving under the speed of 20 mph. It has happened 6 times in the last 2 months. The worse part was it happened on the interstate in the rain and I had to pull over quickly on...
Common questions

Is the 2012 Ford Escape a good car?

Is the 2012 Ford Escape a good car? It will get over 30 MPG on long trips when driven at highway speeds. I purchased this vehicle new in August 2012 and I have had no major complaints for 6 years. PROS: This is a decent commuter car, no bells and whistles, nothing fancy. This is a $20,000 car so you get what you pay for. Is there a problem with my Ford Escape? Sounds as though valves or engine could be cracking. The contact owns a 2012 Ford Escape. The contact was not the first owner of the vehicle and...
Most popular

When to replace the alternator in a Ford Mustang?

When to replace the alternator in a Ford Mustang? You should be getting between 13.8 and 14.2 volts through the battery, but if you see any fluctuations, then your alternator is probably close to failing. If your alternator is shot, then it's time to gear up for a replacement. Unbolt the negative cable (black) from the battery and set it aside. Can a bad battery cause an alternator to over charge? Make sure that all the connections to the alternator, remote voltage regulator (if applicable) and battery are clean, tight and in good condition. Check your battery or have it...
Common questions

How do I get Ford SYNC to access my iPhone messages?

How do I get Ford SYNC to access my iPhone messages? Turn on the vehicle and allow your iPhone to connect. Then tap Bluetooth in the iPhone's Settings app. Select SYNC, then tap Show Notifications on the following screen. The next time you start your vehicle, the syncing will be automatically activated. Why does my 2014 Ford Escape not start? Hi, I recently bought a salvage title 2014 ford escape titanium at an auction and I'm fixing it up right now. I can not for the life of me find out what is wrong with the computer system that is...
Easy lifehacks

How much does it cost to install a blind spot sensor?

How much does it cost to install a blind spot sensor? They typically cost at least $1,000 and easily twice that if packaged with features such as a sunroof. The Insurance Institute for Highway Safety estimated that just four percent of registered 2013 models had blind-spot monitoring. When do blind spot sensors need to be replaced? If that’s the case, the blind spot assist sensors behind the rear bumper will need to be replaced. When the blind spot radar sensors in the rear bumper fail, the turn signals may also stop working. What should I do if my Blind Spot...