Other

Does a 2001 Mustang have a chip in the key?

Does a 2001 Mustang have a chip in the key? NOTE: This ignition key has a chip hidden inside of the plastic head. It is a part of your automobile security system to prevent theft. Therefore, you MUST get it both: cut and programmed. Cutting only will NOT allow you to start the engine. What to do if you lose your Ford Mustang key? If you only have 1 working key, the vehicle has to be linked to the right key compiler is needed to copy a supplemental key. If you lost all the keys to your vehicle, you will...
Easy tips

How do you safely remove an airbag?

How do you safely remove an airbag? Tilt the seat forward and grab the seat, placing one hand on the base of the seat and one on the back, then slowly lift it out of the car, using your legs and not your back to do the heavy lifting. Warning. Never remove an airbag or a part equipped with an airbag without disconnecting the battery first. Is it legal to remove an airbag? It's probably illegal to remove the airbag, since it's presence is a government regulation. How do you disable airbag? 1. Purge the Power. The first step involved...
Most popular

Why are the tail lights on my Ford F-350 not turning on?

Why are the tail lights on my Ford F-350 not turning on? I found a ground wire, located on the inner left frame rail that was significantly corroded. I removed the corroded connector, scraped the wires, installed a new connector and re-connected to frame. As I was doing this, I found a loose wire at one of the connectors located in this location (just as Mattpippert21 noted). Why are the running lights on my Uhaul not working? The running lights, both tail and the clearance lights around the top of the uhaul box, recently stopped working. The tail running lights...
Easy lifehacks

What to do if lights on your trailer are not working?

What to do if lights on your trailer are not working? Connect the jumper wire to one of the pins in the trailer socket. A continuity tester contains a light bulb and a battery. The bulb lights when a circuit is good. Alligator clips at the wire ends make continuity connections quick and easy. If the lights on one side still aren't working, you may have a break in the wire. Why are the lights on my tow truck not working? Trailer light problems can be traced to any point in either the tow vehicle’s electrical system or trailer wiring,...
Other

What is the Diagnostic Code on a Ford F150?

What is the Diagnostic Code on a Ford F150? For example TSB 12-7-4 and 12-8-1 explain that sometimes the above codes (p0505 and P0506) and or this stalling, idling or surging condition may also exhibit Diagnostic Trouble Codes of P2111 and P2112 (or even a P0121 or P2104) stored in the computer. Is there a check engine light on a Ford F150? It is a common situation. You're driving your F150, F250, E150 van, or Expedition, etc and you can feel the engine skipping here and there. So of course you have your handy dandy OBDII scanner with you, so...
Easy lifehacks

What is the power steering warning light on a 2012 Ford Focus?

What is the power steering warning light on a 2012 Ford Focus? The contact owns a 2012 Ford Focus. The contact stated that the power steering assist warning light was illuminated at start-up. The contact would restart the vehicle and the vehicle would resume normal operation. Is there steering assist issue in Ford Focus SEL? I have a 2012 Ford Focus SEL. For about a year I have had this steering assist fault happen but have been able to shut the car off and re start. Last week never corrected itself. What causes steering wheel to malfunction in Ford Focus?...
Common questions

Should you get continuity through a heating element?

Should you get continuity through a heating element? If you still get infinite resistance or zero resistance then the heater element is probably shot. In sum, if there is "continuity" through the heating element it is working. If there is no continuity (no electrical current can flow) then the element has failed. Can you wire a heating element wrong? No, it does not matter which wire goes to which heating element terminal in this case - electricity can flow in either direction. Remember to replace the plastic cover that protects the wires and terminals before pushing the insulation back in...
Common questions

Is there a Ford Transit XLT cargo van?

Is there a Ford Transit XLT cargo van? Made to fit a business on the go, the 2020 Ford® Transit Connect XLT Cargo Van offers ample cargo space, wireless charging, Ford co-pilot 360 and more. Made to fit a business on the go, the 2020 Ford® Transit Connect XLT Cargo Van offers ample cargo space, wireless charging, Ford co-pilot 360 and more. Customer Viewpoint Ratings and Reviews Is the 2015 Ford Transit 150 a good car? The Good The 2015 Ford Transit 150 is available is a wide range of configurations and sizes. In its eight-passenger configuration, the van has...
Common questions

How do I reset my Ford Sync touch screen?

How do I reset my Ford Sync touch screen? On the SYNC screen, press the Menu button. Press the Down Arrow button until SYNC Settings displays on the screen. Press OK. Press the Down Arrow button until Master Reset displays on the screen. Why is my dead sync radio and Sceen black? Dead sync system, radio and sceen is black on my ford explorer 2011. disconnection of battery and removal fuse #29 works at the beginning but nothing happen until a month. I want to check on tke sync 54 pins if it's powered. IS IT POSSIBLE THANKS Why did...
Most popular

How do you change the ignition timing on a Ford Ranger?

How do you change the ignition timing on a Ford Ranger? Ignition timing must change as engine speed increases. On the Ranger, this is accomplished by the vehicle's computer using the Hall Effect of resistance and conductivity. Set the parking brake and place chocks behind the rear wheels. Place the shift lever in neutral, or park for an automatic. Turn off the air conditioner and heater. Why does the timing of fuel ignition change? In order to have the same result, the fuel must be ignited much sooner in the compression stroke. As a result, the timing moves to 32...