Easy lifehacks

What is lifter in engine?

What is lifter in engine? A lifter is a cylindrical component that rides on the Cam Shaft to actuate the Intake and Exhaust Valves. For pushrod engines, the Lifter pushes the pushrod up into the Rocker Arm and opens the valve. For OHC (overhead cam) engines, the lifter pushes directly on the valve tip. Where are lifters located in a engine? The lifter is located between the pushrod and the camshaft. If there is a loose space between the three parts, they can not get in contact with each other, and this will cause engine ticking sound. What causes the...
Easy tips

What can I use in low port of AC?

What can I use in low port of AC? Few days ago I recharge the AC with 2 12oz cans of the Freon using the low port. It work for a while but today the air blow warm air and no feelings of coldness or changing of the air when I turn on to AC. This leads me to try the dye today to see if there is any leaks. How to find a car's low-pressure service port? You can easily recharge your car's air conditioner with A/C Pro and get your car blowing cold air again. To do so,...
Easy lifehacks

Where can I get a replacement headlight assembly?

Where can I get a replacement headlight assembly? Replacing a headlight is easy at PartsGeek.com. We have hundreds of replacement assemblies to choose from, with top brands like Anzo, Action Crash Parts, Hella, Valeo, Crown Automotive and TYC. With our 30-day return policy you can shop with confidence because you have a month to send back a part if you need to. How do you replace a headlight grill on a car? Plug the wiring into the back of the headlight assembly and screw the assembly back into the vehicle. Insert the grill back into place and replace the screws...
Most popular

Will EML light fail MOT?

Will EML light fail MOT? Yes, your car will fail its MOT if your Engine Management Light remains on when the engine has been started. Under the new MOT rules, it is now classed as a major fault. There are many reasons why your EML might be on, some more straightforward than others. What do the warning lights on the dashboard mean? Only a flashing red light means pull over immediately. There are three dashboard light colors on most dashboards: yellow, red, and orange (and, occasionally, blue or green). The most severe alerts are displayed in red or orange. What...
Most popular

What does a dead truck battery sound like?

What does a dead truck battery sound like? A clicking sound when you turn the key, instead of engine ignition, is a common sign that your battery is weak or dead. The clicking sound comes from the starter motor; it usually indicates that the battery does not have enough power to start the engine. What happens when you start a car with a dead battery? Start the car which has the good condition battery, and the dead battery would start charging. Continue doing so for a few minutes. Now after few minutes have elapsed, you should start the car with...
Common questions

How often do you replace starters?

How often do you replace starters? But like many car parts, starters are unpredictable. No two starters will last the same length of time and there is usually no way to know that your starter is dying until the day your car doesn't start and you have to call for service. They could last as long as 200,000 miles or as little as 30,000. Can starters work intermittently? 3. Intermittent issues starting the vehicle. If the starter relay is working properly, it will send power to the starter every time it is engaged. However, it is possible that the starter...
Easy tips

How do I get my jeep out of 4 wheel drive?

How do I get my jeep out of 4 wheel drive? To disengage from 4WD, slow down, shift to neutral, and while rolling, push the lever to 4H. Put your Jeep back in gear and push the lever form 4H to 2H. Check on your user manual if you're unsure of how to use or shift the 4WD. What is the 4x4 low button on a Ford Explorer? If you are traveling in two-wheel-drive, 4X4 auto or 4X4 high, you must come to a complete stop first. You must then shift the transmission to neutral, then push the 4X4 low...
Easy lifehacks

Are Ford Rangers front or rear-wheel drive?

Are Ford Rangers front or rear-wheel drive? Drivetrain: standard rear-wheel drive; available four-wheel drive. Transmission: 10-speed automatic. When did the Ford Ranger switch to 4WD? 1997 would be the last year that you could get a manual 4WD transfer case in a base model Ranger. The big change in the 4WD for 1998 was a redesigned front suspension/axle setup. The Ford Ranger switched from the TTB independent front suspension, to a Short arm Long Arm (SLA) suspension (Dana 35 SLA). What's the difference between a 2003 Ford Ranger? For 2003, Ford has improved and refined the Ranger with better brakes,...
Common questions

How do you clean an oil pan on a Ford Ranger?

How do you clean an oil pan on a Ford Ranger? Lower the oil pan away from the engine block and remove it from the vehicle. Clean the oil pan, using an automotive solvent and allow to air dry. Be sure to remove all the old gasket material from the gasket mating surface. Clean the gasket mating surface on the bottom of the engine block, using a flat razor blade. How do you change the pan gasket on a Ford Ranger? Disconnect the ground cable from the negative battery terminal, by loosening the retaining bolt with a wrench. Pull the...
Most popular

What should I do if my lock shifter is not working?

What should I do if my lock shifter is not working? As you’re pushing down the override button, step on the brake pedal and move the shifter away from the park (P) position usually into neutral (N) position. The lock shifter buttonwill also come handy if you need to push a car especially when the key is not available to turn on the ignition. However, this button is not available in every car. Why does my shifter not shift into Park? When I turn the key back on, it's always in Park, though, so I don't have that problem Grizwaldo....