Most popular

What are the steps to replace front struts?

What are the steps to replace front struts? Part 3 of 3: Replacing your struts Park your vehicle on a level, hard, and flat surface. Open the hood. Open the hood of the car to provide greater access. Loosen the lug nuts. Position the wheel chocks. Lift the vehicle with jack. Position the vehicle on jack stand. Remove lug nuts and wheels. Disconnect brake hoses. Remove bolts. Mount upper strut. How long does it take to replace front struts in? Plus, removing the rusty nut at the top of the strut could turn into a nightmare if the internal hex...
Common questions

What kind of fluid do you use in a Mustang top motor?

What kind of fluid do you use in a Mustang top motor? Fill the pump with Mercon® Multi-Purpose Automatic Transmission Fluid XT-2-QDX or equivalent to the bottom of the fill hole and install the fill plug. NOTE: Some noise squeal may be noticed due to the air in the system. How to replace ATF fluid in convertible top motor? Remove the fill plug and check the fluid level. Fill the pump with MERCON® Multi-Purpose Automatic Transmission Fluid XT-2-QDX or equivalent to the bottom of the fill hole. Install a fill plug. Install the motor and cylinders as an assembly. Position...
Most popular

Why did Ford kill the Bronco?

Why did Ford kill the Bronco? Ford discontinued the Bronco for two reasons (according to Ford): Consumers were looking for four door full-sized SUVs and Ford did not have one available at the time. The Bronco's successor, the Ford Expedition had this feature and also offered more power and a greater variety of options. What inspired the Ford Bronco? Chassis. Again based on the Ford F-Series, the 1980–1986 Bronco is based upon the Ford F-150 (1980–1986 seventh generation). Although based on an all-new chassis, the Bronco retained its 104 in (2,642 mm) wheelbase. What makes a Ford Bronco a Bronco...
Most popular

How much does a PCV valve cost for a Ford F-150?

How much does a PCV valve cost for a Ford F-150? The best part is, our Ford F-150 PCV Valve products start from as little as $3.49. When it comes to your Ford F-150, you want parts and products from only trusted brands. When to replace PCV valve on 2006 Triton F150? Ford recommends replacing the PCV valve every 60,000 miles to ensure that these gases are being evacuated properly. Before you can replace the valve, you need to know where it is. Park the 2006 Triton F-150 on a level surface. What does idle air control valve on Ford...
Easy tips

Is the 2006 Mustang manual?

Is the 2006 Mustang manual? Performance & mpg. V6 Mustangs include a 4.0-liter V6 with 210 horsepower and 240 lb-ft of torque. Step up to the GT and you'll get a 4.6-liter V8 with 300 hp and 320 lb-ft of torque. All Mustangs are rear-drive, and can be equipped with either a five-speed manual or a five-speed automatic transmission. Where to find the owner's manual for a 2006 Mustang? Page 9 Vehicle Symbol Glossary Power Windows Front/Rear Child Safety Door Lock/Unlock Panic Alarm Engine Coolant Do Not Open When Hot Avoid Smoking, Flames, or Sparks Explosive Gas Power Steering Fluid...
Common questions

Why is my Tacoma creaking?

Why is my Tacoma creaking? Dry Jounce Bushing: The jounce bushing is located at the top of the front strut. If it's dry, it can cause a groaning/creaking sound during turns. Creaking while turning can be a sign of damaged tie rods, but it's more usual to hear a knocking sound when making tight, low-speed turns. Do front shocks squeak? 6 Signs You May Need New Shocks or Struts Evidence of a damaged or leaking shock or strut is an easy clue that it's probably time for some suspension work. Your vehicle squeaks. In addition to the shocks and struts,...
Common questions

What is the lightest strong plastic?

What is the lightest strong plastic? Now research has resulted in the creation of the strongest, lightest weight silica nanofibres - 'nanowires' that are 15 times stronger than steel and can be manufactured in lengths potentially of 1000's of kilometres. What is the lightest hardest material? graphene A team of MIT researchers have created the world's strongest and lightest material known to man using graphene. Futurism reports: Graphene, which was heretofore, the strongest material known to man, is made from an extremely thin sheet of carbon atoms arranged in two dimensions. What plastic is the hardest? Strong and Stiff Acrylic...
Common questions

Should brake pads and rotors be changed together?

Should brake pads and rotors be changed together? Brake pads and rotors work together to stop your vehicle. New pads may not be shaped to fit the old rotors, which will send you back to the shop with brake noises, vibrations, and premature wear on your new pads. At Virginia Tire & Auto, we don't recommend just getting the brake pads replaced. What happens when you change brake discs but not pads? When you think about it, it is no different from the incompleteness when you changed to new pads and kept the partly-worn discs. Do you need to replace...
Other

How long does it take a new alternator to charge battery?

How long does it take a new alternator to charge battery? Basically, at idle you can probably get 80 amps out of your alternator. You can charge a flat battery to 80 percent full in about 2 hours, so long as you alternator can manage produce around 14 volts at the battery terminals this whole time. What should I do before installing a new alternator? Your battery should have been disconnected before you installed the new alternator. Make sure your car battery has the proper capacity for your vehicle and that it is fully charged. If the battery is defective...
Common questions

What color is diesel engine coolant?

What color is diesel engine coolant? For diesel trucks using green antifreeze, the recommendation of coolant service is usually around two years or 30,000 miles. For diesel engines running extended-life coolant, service is around five years or 100,000 miles. To be on the safe side, periodically check the antifreeze every six months. Why is my radiator coolant Brown? Coolant becomes brown from rust. If your coolant is brown, the coolant needs to be drained and the system flushed before it can be filled with fresh coolant. If the coolant is bubbling, there is a good chance that combustion gases from...