Common questions

Is it OK to shift from 4Lo to 2HI?

Is it OK to shift from 4Lo to 2HI? You should be able to switch from 4lo or 4hi to 2hi at about 30 mph. I just recently sold my '99 S-10 4X4 4.3L Automatic. It is OK to shift into 4hi at any reasonal speed or back to 2hi. However do not shift into 4lo at more than 3 mph. It is recommended that you even put the trans in neutral to shift into 4lo. When to shift from 4 wheel drive to 4HI? However do not shift into 4lo at more than 3 mph. It is recommended that...
Common questions

How do you know when your shift solenoid is bad?

How do you know when your shift solenoid is bad? The main driving symptoms that you will notice with the symptoms of a bad transmission control solenoid is that there could be delayed gear shifting, you can't downshift and your engine will continue to rev, your transmission will be stuck in the neutral position, and the shifting of gears becomes very rough and choppy ... How much does it cost to diagnose p0756 engine code? The cost to diagnose the P0756 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make...
Most popular

Which Allison Transmission does a 2004 Duramax come with?

Which Allison Transmission does a 2004 Duramax come with? Allison 1000 5 Chevy/GMC Duramax - 2001-2004 GM 6.6L LB7 Duramax - Transmission - Allison 1000 5 Speed. What is the Allison Transmission in? automatic transmissions Allison Transmission is an American manufacturer of commercial duty automatic transmissions and hybrid propulsion systems. Allison products are specified by over 250 vehicle manufacturers and are used in many market sectors including bus, refuse, fire, construction, distribution, military, and specialty applications. Is the Duramax Allison 1000 a manual transmission? Rather than becoming outdated, the Allison has evolved to match the performance characteristics and demands of...
Easy lifehacks

What are the transmission cooler lines for a Duramax?

What are the transmission cooler lines for a Duramax? The Fleece FPE-TL-LB7-LLY Allison Transmission Cooler Lines fix the old leaky transmission lines in your 01-05 GM 6.6L Duramax LB7 and LLY. These heavy-duty, high-flow, flexible transmission lines are just what you need for trouble-free performance from your Allison Transmission. What kind of oil cooler does a Duramax use? The Dorman 624-896 Transmission Oil Cooler Line for your 2003-2005 GM 6.6L Duramax takes you a long way in protecting your transmission. Dorman's line's leak-resistant design prevents the common, high-stakes problem of transmission fluid loss. Plus, its robust construction readily defends against...
Other

How often does my car not start in the rain?

How often does my car not start in the rain? Occasionally it has some trouble starting. When this happens, it is usually in the mornings or when it has been raining. When it doesn’t start, there is a backfire. 90% of the time, it has absolutely no problem starting. I don’t even hit the gas pedal - it just starts like a dream. But on especially humid or rainy days it is finicky. Why is my car hard to start cold or runs poorly? Those are your main causes of cold start enrichment failure. I suppose a fuel pump could...
Easy tips

What is the best diesel truck ever made?

What is the best diesel truck ever made? Best Diesel Trucks You Can Buy2006 and 2007 Chevy and GMC 2500 and 3500. 2003-2004 Dodge Ram Heavy Duty. 2008-2010 Ford F-250/F-350. 2014 Ram 1500. 2012 Chevy Silverado HD. 1991-1/2 to 1993 Dodge Cummins. 1999-1/2 to 2000 Ford Super Duty. 2010 Dodge Ran 2500HD. Are there any known serious problems with the 2006 Duramax? It was a lease return when I bought it in June 2007 with high mileage for its age, but did not appear to have been abused. Are there any known serious problems with the 2006 Duramax, or things...
Easy lifehacks

What is the Green Line on a Chevy TBI?

What is the Green Line on a Chevy TBI? The green line is the vent line that goes to the tank. You have three lines attached to the tank: fuel line, fuel return line and ventilation. The vent line is missing on cars with ventilated gas tank caps. Due to a cam change I am short on Vacuum at idle.Is there a way to add a vac pump in the system to solve this problem. Can a GM TBI be used for fuel injection? TBI Fuel Injection Conversion using a GM TBI EFI system! One of the most popular EFI...
Most popular

How much is a 1 gallon of oil?

How much is a 1 gallon of oil? Wholesale Packaging Conversions1 Gallon = 7.61 Pounds3 Liters = 6 Pounds1 Gallon = 3.78 Liters3 Liters = .79 Gallons1 Gallon = 128 Ounces3 Liters = 101.5 Ounces1 Gallon = 3.45 Kilograms3 Liters = 2.74 Kilograms35 Lbs = 17.41 Liters5 Gallons = 38 Pounds How do you make fuel from cooking oil? Basic Steps to Biodiesel.Collect and filter used cooking oil, and allow unwanted water to settle and drain out.Pump the oil into a processor and add a methoxide catalyst. The oil reacts with the methoxide to form biodiesel and a glycerin coproduct;...
Common questions

How can I switch my truck from neutral to 4WD?

How can I switch my truck from neutral to 4WD? The one on the dash. try taking the tranfer case motor out cleaning the plugs and putting it back in also! Ok is it hard to take the transfer case motor out? When your truck does that, can you switch it out of neutral and/or auto? Can a Chevy truck not drive in 2WD? In summary, it is possible to have a condition where the truck will not engage/move in 2WD but it would in "4WD" and "Auto 4WD". It will drive the rear wheels in "Auto 4WD". Why does...
Easy lifehacks

Are there late model Chevy small block crankshafts?

Are there late model Chevy small block crankshafts? Late crankshafts were redesigned for the one-piece seal and incorporate a large round flange. Late-model cranks are not compatible with early blocks. However, GM crankshaft seal adapter P/N 10051118 permits the installation of early-style two-piece rear seal cranks into blocks machined for the late-style one-piece rear seal. How do you straighten a Chevy small block crankshaft? Straightening a crankshaft is a simple process. Pressure is applied to the crank to bend it in the right direction. Fix it in place with a hammer blow. This procedure does not shorten crankshaft life, but...