Easy lifehacks

Is 2009 Crown Victoria a good car?

Is 2009 Crown Victoria a good car? Best vehicle I've ever owned. The 4.6L V8 may not be a race engine but combined with the Police transmission and rear end, it makes for a solid reliable vehicle. I'm able to do most maintenance myself and it hasn't needed much more than the basics. I'm up to 150,000 miles and it's still a highway star. How much horsepower does a 2009 Crown Victoria have? 224 hp @ 4750 rpm Used 2009 Ford Crown Victoria Specs & FeaturesEngineHorsepower224 hp @ 4750 rpmTorque265 lb-ft @ 4000 rpmTurning circle40.3 ft.Valves16 How much is 2009...
Easy tips

Is Ford making the 2021 f150?

Is Ford making the 2021 f150? The 2021 F-150 price ranges from about $31,000 to $76,000. In 2020, buyers paid an average of $51,000 for F-Series. What kind of engine does a 2005 Ford F-150 have? 2005 Ford F-150 Specifications Overview Specifications: 2005 FORD F-150 SPECIFICATIONS Powertrain/Chassis: POWERTRAIN: 4.2L V-6 . 4.6L TRITON V-8. 5.4L TRITON V-8 Engine Type: V-6 iron block, iron heads. V-8 iron block, aluminum heads. V-8 iron block, aluminum heads Bore/Stroke: 3.81 x 3.74. 3.55 x 3.54 in. 3.55 When did the Ford 4.2 liter engine come out? Those early problems, however, dogged the engine's reputation...
Other

How much gear oil can I put in my rear end?

How much gear oil can I put in my rear end? Will 2 quarts of 75W-90 or 75W-110 and 4 oz. of GM LSD additive be enough to fill my rear end (has a Yukon Duragrip Posi Unit, not that it matters)? I'm going to drain my rear end gear oil and refill it. I want to make sure I get enough gear oil before I do it. Thanks, NYH1. I'm thinking two quarters will not be enough. How many pints of oil does rear axle hold? My rear axle took just over 2 quarts, or almost 5 pints, it...
Easy tips

Is a 2016 Ford Fusion a good used car?

Is a 2016 Ford Fusion a good used car? The 2016 Ford Fusion is a good used midsize car, but it struggles to keep pace with better competitors. The Fusion has lively handling, a handsome interior, and strong available engines – just stay away from the base motor. Where is the purge valve on a 2016 Ford Fusion? The canister purge valve on a 2016 Ford Fusion is located at the back center of the engine compartment, right next to the throttle body. Is the Ford Fusion a good car to buy? Fusion is a good medium size car. Lots...
Easy tips

How to disable the anti theft system on a Ford Mustang?

How to disable the anti theft system on a Ford Mustang? With the doors shut You want to put the key into the ignition slot and turn it on. Once You have turned it on You will then want to turn it back to the off position. Now repeat this procesS8 more times, and make sure You do it in under 12 seconds. On the last one, You will want to leave the key in the on position. When does the anti theft system car wont start? If the engine does not respond or dies immediately after cranking up, leave...
Other

How to test the fuel injector Plug Plug?

How to test the fuel injector Plug Plug? 1 Turn the multimeter to "Ohms." 2 Place the multimeter leads into the fuel injector plug terminal. 3 Read the Ohms, or resistance, produced by the fuel injector. Note the value or write it down. 4 Test all the fuel injector Ohm readings. Compare the value of each reading to the other values. What happens when fuel injectors are not working? The engine does not make power. Engine does not want to start. Clogged fuel injectors diagnostics. Diagnosing dead or clogged fuel injectors is difficult because it acts the same than a...
Common questions

What does it mean when your transmission light is flashing?

What does it mean when your transmission light is flashing? If this light is flashing, you have transmission codes. For those of you who don’t know, DTC stands for Diagnostic Trouble Code. When your vehicle starts malfunctioning, its computer will pick up on it and analyze the problem and store the code. On some vehicles, the code will get stored before the light even comes on. What causes a blinking or flashing check engine light? A blinking or flashing check engine light is always caused by misfires. However, it is not as simple as that because many different things can...
Common questions

When is it time to have your Turbo checked?

When is it time to have your Turbo checked? If you start to hear this noise from your engine, it’s definitely time to have it checked out! If you notice any of the warning signs, then get your turbo checked as soon as possible. Your turbocharger isn’t going to repair itself, and the longer you leave it, the worse (and more expensive) the problem will get! What should I do if my Turbo is not working? Before you start the process, we recommend checking the air filter, exhaust system, breather system and fuel system on your vehicle are all working...
Other

Are there any manuals for the Ford F250?

Are there any manuals for the Ford F250? Here we have a collection of Ford F250 Manuals and some Ford F150 Manuals that you can read online or download, these are free and always should be don’t be tricked into buying manuals and stuff when they are something you have a right to for free. Where is the fuse box located on a Ford F-250? ’02-’04: 4-Wheel Anti-lock Brake System (4WABS) module, Variable Fan Control (VFC) (’03-’04, Diesel) An auxiliary relay box is located in the left-hand front side of the engine compartment. This box contains relays for the Electronic...
Other

Can you use an OBD2 scanner on a Ford truck?

Can you use an OBD2 scanner on a Ford truck? Ford Vehicles OBD-II Protocol The scanners listed here compatible with Ford cars and trucks. Ford uses the SAE J1850 PWM protocol to communicate with the different systems on your vehicle, including the Engine Control Unit (ECU / ECM). If you own an older Ford manufactured between 1982 and 1996, you won't use any of the scanners in this list. Can a Bluetooth diagnostic scanner be used on a Ford? The BlueDriver LSB2 Bluetooth can turn your Android or iPhone into a powerful diagnostic scanner. It works on most cars but...