Other

How long does it take for a child to die in a car?

How long does it take for a child to die in a car? The study found if a car is parked in the sun on a summer day, the interior temperature can reach 116 degrees and the dashboard can exceed 165 degrees in about one hour — the time it can take for a young child trapped in a car to suffer fatal injuries. What is forgotten baby syndrome? Forgotten Baby Syndrome (FBS) defines the phenomenon of forgetting a child in a parked vehicle. FBS is in constant growth with significant repercussions for the parent, the family and society. What...
Common questions

What are the car seat requirements in Texas?

What are the car seat requirements in Texas? Texas law requires that all children younger than 8 years old, unless they are taller than 4 feet 9 inches, be secured in a child safety seat whenever they ride in a vehicle. Older children who have outgrown a booster seat must be buckled with a seat belt. When did car seats become mandatory in Texas? By 1985 the first child passenger safety laws were passed. This required children under a certain age to have a car seat when riding in a vehicle. How old do you have to be to sit...
Other

When does the car vibrate from 50 to 60 mph?

When does the car vibrate from 50 to 60 mph? The car runs smooth between 0-50 mph. When it reaches 50mph, it starts to vibrate. But when it crosses 60mph, it becomes smooth again.. I'm not sure what the problem is?? The car runs smooth between 0-50 mph. When it reaches 50mph, it starts to vibrate. But when it crosses 60mph, it becomes smooth again.. What causes the steering wheel to vibrate at high speeds? Tires are one of the most common causes of car vibrations. One of the possible issues you might be dealing with in this context are...
Easy tips

Where is the gas shut off switch?

Where is the gas shut off switch? Your main shut off valve is located just before the gas meter. This is called your “street side valve”. On the inside of your house, where the pipe enters your house, you can find your “house side valve.” This ball valve is attached to a black iron pipe. Where is the shut off valve for a gas stove? Gas stove: This valve is often located at the back of the oven and can be accessed by pulling out the bottom drawer of the stove or carefully pulling out the entire stove from the...
Other

What causes hard spots on rotors?

What causes hard spots on rotors? Warping actually just refers to an uneven surface, mainly caused by heat. The brake rotors can be warped in the following ways: The brake rotors can become glazed with material from the brake pads. This happens when the brake pads get very hot which causes the pad material to rub off onto the brake rotors. What causes heat damage to rotors? Heat Spots Heat spots will lead to brake harshness, vibration and reduced structural integrity. Heat spots on brake rotors occur when brakes aren't broken in (bedded) properly and the brake pad deposits on...
Easy lifehacks

How many miles can you get out of a 2002 Chevy Trailblazer?

How many miles can you get out of a 2002 Chevy Trailblazer? The Chevrolet Trailblazer is a durable vehicle with an average lifespan of 200,000 miles. Why is my Chevy knock sensor not working? One of the things that is often a stumbling block is breaking the quick disconnect clip that holds the heater bypass hose on. Once again Chevrolet put a plastic part in a place where engine heat is excessive. The replacement clip is only five dollars, but finding one can be difficult in some areas. What happens when a shop knock sensor fails? A failed knock sensor...
Common questions

Why are my jumper cables sparking?

Why are my jumper cables sparking? The battery cables can spark if the cables are installed in the improper order. When attaching the battery cables, place the positive cable on first and then the ground cable. Do not allow the cables to touch on the free end not yet hooked into another battery while the cables are connected to the first battery. What happens if you connect the jumper cable backwards? Car owners may accidentally connect the jumper cables in reverse order or install the battery backward, which causes the vehicle to no longer start. The purpose of this troubleshooting...
Most popular

What happens when you heat up a starter?

What happens when you heat up a starter? Once under-hood heat warms the battery, cables, and starter, a “tipping point” is reached concerning the overall amount of resistance a starter can accept (and still function properly). What's the temp on a Silverado Sierra GMC? Tranny temp was fine as I have a really good aftermarket trans cooler installed. It was hot out as well, roughly 32 deg c (93 deg f). Just wondering how hot is too hot? I was at the top of the hill by the time it reached that temp and it came down quickly once I...
Common questions

What should the pressure be on the fuel delivery switch?

What should the pressure be on the fuel delivery switch? This switch will read “low” if the low fuel pressure is not correct. If the low side pressure is good, it will read “not low”. It is also a good idea to check supply pressure with a gauge. The minimum pressure allowed before the fuel delivery switch engages is 52 PSI. Normal pressure is between 53-73 PSI per Ford. How can I tell if my fuel pressure sensor is correct? First, make sure that the fuel pressure sensor is correct. Check the fuel pressure with a manual fuel pressure gauge...
Easy lifehacks

What does it mean when your AC compressor stays on?

What does it mean when your AC compressor stays on? When the proper amount of refrigerant is in the system, the compressor will not cycle and continuously stay on whenever the A/C/defrost is being used. In other words, if the compressor is continuously running when the A/C is being used and is not running when the climate control is off, this is normal operation. What happens when the air conditioner compressor does not start? The compressor does the job of compressing the antifreeze, which then goes into the condenser in that concentrated form. This is how the air-flowing cycle in...