Common questions

Is the exhaust fluid fault a limited speed issue?

Is the exhaust fluid fault a limited speed issue? Exhaust Fluid System Fault Limited Speed Issue Solve? 2014 F350 6.7, 145000kms. So this is the second time I've had the exhaust fluid system fault come up. First time exactly 2 months ago. Truck went to the shop and after 5 days, lots of code clearing and regen cycles, they tell me its fixed. Is there a fault in the exhaust system? Exhaust Fluid System Fault!!! Hey guys, I have a 2015 F-250 with 78k miles. 2091 Engine hrs 434 idle hrs. Yesterday i got the Exhaust Fluid System Fault message....
Other

What should I do when installing a new thermostat?

What should I do when installing a new thermostat? You need to be sure the thermostat doesn't slip out of place when installing. Being vertical, it can slide down. Also, when tightening the bolts, go from side to side frequently, snugging them a little at a time to ensure even pressure. And obviously the gasket surfaces must be clean for a good seal. What to do if your thermostat housing is leaking? Put the T-stat in the housing and then stick the gasket on to the housing; it will serve to hold the t-stat in place while you bolt it...
Common questions

How do I know if my AC expansion valve is contaminated?

How do I know if my AC expansion valve is contaminated? Symptoms of a bad expansion valveCar AC system isn't cooling enough or won't cool at all.High side pressure is high.Air coming from vents is frosty.AC blows cold, then hot.AC kicks on and then immediately kicks off.Airflow drops dramatically from vents. Why is my Ford air conditioner still running? However, when it comes to paying for repairs to heating and air conditioning in Ford models, many find that AC issues are misdiagnosed and mistreated, costing customers extra money on unnecessary parts and labors. Can you repair an air conditioner in...
Easy lifehacks

How can I tell when my gas cylinder was last tested?

How can I tell when my gas cylinder was last tested? Look down the side of your gas cylinder. You’re looking for two sets of numbers separated by a dash. If the first set says 07. That means July. If the second set of numbers after the dash says 16. This means 2016. Your gas cylinder was last tested in July 2016. When your gas cylinder has more date stamps. What do you need to know about cylinder identification? • Clues are helpful in cylinder identification in a facility that’s used them for its operations or for sale • Clues may not apply in case of mad scientists and meth labs Labels –the easy way DOT Placards Cylinder Features Where can I find ISO UN DOT cylinders? American Airworks ISO-UN-DOT...
Easy tips

What to do if your power wheels are not working?

What to do if your power wheels are not working? If you tightened the motors using a power drill take them back out, put threadlock on the screws, and hand tighten the motors. 6. Check your rear axle for even the slightest bend. Roll it on a flat surface. This problem can also shred final gears, third gears, and gearbox housings. What happens when an electric motor fails to work? Electric motors have only 2 options: work or fail. When they fail then no amount of power will make them move and they create an open circuit so the fuse...
Most popular

Where is the belt tensioner on a Taurus Sable?

Where is the belt tensioner on a Taurus Sable? From 1996 to 2000, the front covers on Taurus/Sable models have a fitting at the top right for the camshaft position sensor, and a fitting at the lower left next to the crank for the crank position sensor. The belt tensioner is located on the left side of the cover. When did the Ford Taurus Duratec V6 come out? The 3.0L Duratec V6 was introduced in 1996 to replace the aging 3.8L V6 in the Ford Taurus and Mercury Sable. Unlike its conventional pushrod predecessor, the 3.0L V6 has dual overhead...
Easy tips

What are radiator support bushings?

What are radiator support bushings? Often lost during radiator servicing, this Bushing secures the radiator to the vehicle and eliminates excessive radiator vibration. How to remove and replace a radiator support? A 1996 Honda Accord was mainly used to demonstrate how to perform this task. Most radiator supports are welded in and have to be cut out and welded back in. If you are interested in learning more on how to do this type of repair and learn true body work and paint, follow this link: If you found this video valuable, give it a like. How do you drain...
Easy lifehacks

What are the scan tools for brake systems?

What are the scan tools for brake systems? Scan Tools And Brake Systems. The two main options of scan tools are a standalone ABS scanner or a full-feature scan tool that has ABS as a software add-on. It is also important to have the correct connection cables for the scan tool to access the manufacturer specific ABS system connectors. How to bleed ABS brakes without scan tools? The Procedure of How to Bleed ABS Brakes. 1 Loosen the Bleeder Valves. After preparing the vehicle, your first task is to loosen the bolts of the bleeder valves. Use a box wrench...
Most popular

Is it necessary to remove a car stereo?

Is it necessary to remove a car stereo? No matter the reason, removing your car’s existing stereo is a necessary part of the process. If you have the confidence to do so, you can surely do it on your own without the need for any special tools. However, if you’re not sure of your skills, leave it to a professional. Which is Daewoo car stereo and speaker removal? Daewoo Car stereo and speaker removal, + includes retrieving stereo codes. Dodge Car stereo, front door speakers, front dash speakers, rear speakers, and CD changer removal, + includes aftermarket car stereo, speaker...
Common questions

What kind of motor does a Ford Expedition use?

What kind of motor does a Ford Expedition use? Romeo SOHC block (F7AE Probably used as the primary block in 1997-1998 pickups & Expedition.)Block has a second bolt hole to mount the extended housing that moved the oil filter to the back, closer to the bell housing, to provide enough room for an oil cooler.Block may have been used in Crown Victoria Police Interceptor package. When did the Ford 4.6L V8 come out? The Ford 4.6L V8 engine, the first member of Ford's Modular overhead camshaft engine family in the production, was introduced in the 1991 Lincoln Town Car. It...