Most popular

How can I Test my Turn signal bulbs?

How can I Test my Turn signal bulbs? One simple test is to connect a hot wire directly to the wires going to the turn signal bulbs. This will bypass the flasher and column switch to make sure the bulbs are working. West Allis,Wi. West Allis,Wi. I have LED bulbs on just the rears of my 1950. The signals work OK but the piolet light on the signal switch does not light-up. Why are the rear lights on a 1954 Chevy club? Perhaps the wiring harness has been replaced. You have not shared any history of the wiring work done...
Easy tips

What kind of engine did a 1972 Corvette have?

What kind of engine did a 1972 Corvette have? With a high revving small block 350ci engine and a 4-Speed manual transmission to run through the gears, an LT-1 Corvette offered neck-snapping acceleration and the ability to take corners the likes of any European sports car. To achieve it's legendary performance, the 1970-1972 LT-1 used some of the best internal engine parts GM ever made. How many corvettes were made with the LT1 engine? If you notice, any other LT1 from 70-72 has a 6500 RPM redline tach in it! How unique is that! Out of the 20,000+ corvettes that...
Easy lifehacks

How much horsepower does a 1972 Chevy C10 have?

How much horsepower does a 1972 Chevy C10 have? Inline 6 Displacement : 4785 cc | 292.0 cu in. | 4.8 L. Power : 145 HP (106.72 KW) @ 4200 RPM Torque : 230 Ft-Lbs (312 NM) @ 1600 RPM Bore : 3.9 in | 99 mm. Stroke : 4.5 in | 114 mm. How can I tell if my C10 truck is re wired? This is actually a common problem in 70s and 80s C10s and no one ever get's the right answer. If no one has re-wired this truck in the past then turn your key to the...
Easy tips

How do I tell what carburetor I have in my Mustang?

How do I tell what carburetor I have in my Mustang? To identify your carb you need the Ford tag number which is stamped into a triangular shaped aluminum tag under one of the fuel bowl screws. The numbers on that tag are the carb identification number, the design code and the production date code. What carburetors did Ford use? Ford trucks, Lincoln cars, Jeep and AMC continued to use Autolite four-barrels with a third generation carburetor referred to as the model 4350. What kind of carburetor did the 1965 Mustang have? Here is the blow up of the Holley...
Other

When the choke is on is it open or closed?

When the choke is on is it open or closed? Normally choke will be in open position, in which valve is parallel to the air flow, and has no effect on the air flow. When choke is actuated by mechanical or by pneumatic method, it rotates an angle restrict the air flow (closed position). How do you get a broken choke out of a plunger? Take needle nose pliers, grab plunger in center. Turn, push, pull, first gently then a bit more vigorously as it moves some. NOW, spray again, wait again and repeat the needle nose. With any luck...
Other

What does a sketch include?

What does a sketch include? What is a Sketch? A sketch is not designed to be a detailed drawing that gets every element perfect. Instead, it captures the essentials of the subject - the overall form and perspective, a sense of volume, movement, and feeling. The sketch may also include the suggestion of light and shade. What are the 5 components of sketching? Traditional way of looking at art, namely the visual arts, suggests that there are five basic elements of an art work – line, shape, color, texture and space. You might find form singled out as a separate...
Common questions

How do you replace a fan control module?

How do you replace a fan control module? Typically only a few bolts hold the control module in place on the fan assembly. Remove these bolts and place them in a safe location. They will be reused in a moment. With the unit removed compare it to the new one and make sure they are identical and have the some connections. How can I check if my car fan is working? Step 1: Check over the installation. With any repairs we will always check our work for any errors before starting the vehicle. Make sure the fan control module in...
Most popular

How much is a brake caliper for a 2008 Dodge Caravan?

How much is a brake caliper for a 2008 Dodge Caravan? Our 2008 Dodge Grand Caravan Brake Calipers products start for as little as $92.10. How much is it to get brake pads replaced? Brake pads usually last around 45,000 – 60,000km, but this may be less or more, depending on the driving you are doing. The average price to have your front brake pads replaced starts at around $150 and can increase to $350 and above, depending on the vehicle and type of brake pads used. What do brake calipers do? Calipers are found on each wheel and work...
Other

What is chrysler BCM?

What is chrysler BCM? The body control module, or BCM, in a Chrysler vehicle controls all of the body-related functions such as the interior lights and door chimes. Replacement BCMs are available from auto parts stores, automotive salvage yards and licensed Dodge and Chrysler dealerships. Where is the BCM on a 2014 Ram 1500? The BCM is generally accessible from under the dash, but is actually located in the engine bay's fuse box. In the Ram 1500 the BCM is under hood near the long rectangular fuse box next to the drivers side of the firewall. What does the BCM...
Easy tips

Where was the first Chrysler Town and Country made?

Where was the first Chrysler Town and Country made? It was first produced by Austin Rover and later by the Rover Group. Descendants of the Maestro are still in produced in China. The Maestro incorporated many novel features like bonded laminated windscreen, homofocal headlamps, bodycoloured plastic bumpers, electronic engine management system etc. When did the Chrysler 3.3 engine come out? The original 3.3 engine, as well as the larger 3.8, are pushrod engine designs. The 3.3 was introduced in 1989 with the 1990 Chrysler Imperial, New Yorker, and related K-series models, and was joined in 1991 by the 3.8. Where...