Most popular

Why is my car battery Red?

Why is my car battery Red? One is marked positive (+), the other negative (-). There are also positive and negative cables in the jumper cable set. The red one is positive (+), the black one is negative (-). Never connect the red cable to the negative battery terminal or a vehicle with a dead battery. What do you do when your car battery is red? The positive (red) cable should be attached to the positive terminals on each battery. The negative (black) cable should have one end attached to the negative terminal of the dead battery, and one end...
Easy tips

Can you read Check Engine codes on a Mustang?

Can you read Check Engine codes on a Mustang? Not only can you use this to tune your Mustang for more HP, adjust for rear end gears and off-road mid pipes but you can also use it to read and "Clear Check Engine Codes"! If you don’t have access to an SCT Tuner you can always run to your local auto parts store and most will scan your vehicle via the OBD-II port for free. What's the code for a 2015 Ford Mustang? This is a typical code for all 2015+ Mustangs after flashing and it can just be cleared...
Easy tips

How much does a Mercury Grand Marquis cost?

How much does a Mercury Grand Marquis cost? MakeAvg PriceLast 30 DaysCarGurus Index$27,654+1.58%Mercury Grand Marquis$6,306-0.89%1997 Mercury Grand Marquis$4,049+7.09%1998 Mercury Grand Marquis$3,687-15.28% When did they stop making Mercury Marquis? 2011 By the early 1990s, the Grand Marquis was only offered as a sedan. Production ended after the 2011 model year when the Mercury brand was canceled. The Mercury Grand Marquis started out as the top trim level for the Marquis before becoming its own model line in 1979. What's the price of a 2007 Mercury Grand Marquis? The Grand Marquis’ huge trunk is exactly what many golfers love about this car;...
Easy lifehacks

How can I relieve fuel pressure on my car?

How can I relieve fuel pressure on my car? If the fuel pump is accessed from underneath, be sure the vehicle is secured on the jack stands before crawling underneath and locating the fuel pump assembly. Unplug the fuel pump electrical connector on the sending unit/pump assembly. Start the engine and let it idle until it stalls. Then turn off the ignition switch. How to check fuel pressure in Ford Explorer? Ford Explorer: How to Check Fuel Pressure. If playback doesn't begin shortly, try restarting your device. Videos you watch may be added to the TV's watch history and influence...
Easy lifehacks

What does it sound like when a rod is knocking in a car?

What does it sound like when a rod is knocking in a car? Rod knock typically sounds like a low-pitched knocking sound that can be heard deep in the engine. As the engine speeds up, the frequency of the noise will increase, but you can hear it at any engine speed. If you hear a type of knocking sound that disappears after the engine warms up, this is likely not rod knock. Why does my car make a knocking noise when I Turn on the engine? If engine noise seems to be from the bottom of the engine, it’s likely...
Other

What was the Mustang originally called?

What was the Mustang originally called? Ford MustangAlso calledFord T5ProductionMarch 1964 – presentModel years1965–presentDesignerJohn Najjar Philip T. Clark Joe Oros Gale Halderman Where can I buy a 1986 Ford Mustang? Gateway Classic Cars of Dallas is proud to present this 1986 Ford Mustang GT Convertible. Since the With today's focus on bling, wing, and other tacked-on stuff that doesn't make a car go faster, it' ... Is the 1986 Ford Mustang LX SSP in good condition? The glass all appears to be in good condition, and the Mustang rolls on its original steel wheels, which were a part of the...
Common questions

Why are V6 engines unbalanced?

Why are V6 engines unbalanced? Balance and smoothness All V6 engines—regardless of the V-angle between the cylinder banks—are subject to a primary imbalance caused by each bank consisting of an inline-three engine, due to the odd number of cylinders in each bank. In a four-cylinder engine, only one piston is on a power stroke at any given time. How much horsepower does a Mercury Sable have? Although the power output was rated at the same 140 hp (104 kW) as the 3.0 L engine, this large V6 produced 215 ft·lbf (291 N·m) of torque, a welcome addition, especially in the...
Other

How to make the rattling sound in gear go away?

How to make the rattling sound in gear go away? The throttle is then backed off to the original position while still in forward gear...that is when the sound is heard. The throttle is then bumped a bit (back to around 900- 1000 RPMs) and the rattling clanking goes away. I've looked through some previous posts and it seems as if the jury is out on how to make this condition go away. When does your car make a rattling sound? Recently it has started to make a rattling sound; not painfully loud but a clearly noticable and sounds somewhat...
Easy tips

Are 2 pin plugs dangerous?

Are 2 pin plugs dangerous? The main reason two-prong outlets are considered outdated and dangerous is due to their lack of grounding. This is what makes two-prong outlets the least safe of any type of outlet. Two-prong outlets have connections only for hot and neutral wire, hence their name. What plug has 2 pin? Hence the 2 pin plug you find on the charging stands for electric toothbrushes and to power other things like electric shavers, which are most commonly used in the bathroom. These sockets are often known as 'shaver sockets' because this is what is commonly connected into...
Other

What are the torque specs on Weld wheels?

What are the torque specs on Weld wheels? Lug Nuts: 7/16 Wheel stud = 75-85 ft-lbs 1/2 Wheel stud = 85-95 ft-lbs 5/8 Wheel stud = 130-140 ft-lbs 12mm = 90 ft-lbs 14mm = 110 ft-lbs Weld Racing does not recommend the use of lubricant when installing lug nuts. What are the torque specs for Beadlock wheels? Tighten the bolts to the following torque specs: (using the criss-cross pattern) 12” and 14” HD Beadlock: 10ft/lbs. 8. Use tire mounting lube only on the tire/wheel opposite the beadlock (the inner bead) to ensure a proper seat for the tire. What is...