Most popular

Will 383 heads fit a 440?

Will 383 heads fit a 440? There really is no such thing as a specific 440 head. The 906's, 902,452,915 (and there a half dozen more heads) will fit any 383, 400 or 440. They are completely interchangeable. The intake manifolds for a 440 will not fit a 383/400 however without machining or adaptor plate to go the other way. What heads for a 383 stroker? MCSA is based on CID and rpm. A 383 that will see 5000 rpm max, a 170 ccc head will work just fine. A 383 that want to go to 7000 rpm then 210...
Common questions

How do you decode a VIN number on a Mustang?

How do you decode a VIN number on a Mustang? At first, a VIN might look like a series of randomly-generated digits. However, each place in the 17-digit identifier is used for a different purpose....What Are the Parts of a VIN?Digit PlaceInformation5-7Model8Engine9The mandatory “check digit” (see below)10Model year Why is it called a 1964 1 2 Mustang? A true royal gem in Ford's car making history. Although originally the Mustang was advertised as an early 1965 model, Ford made some changes to the later 1965 models that differentiated the two, and it is known today as the 1964 1/2 Mustang...
Other

Why does the fuse keep blowing on my Ford F150?

Why does the fuse keep blowing on my Ford F150? The most common cause of the problem you are having is a defective A/C clutch relay. Which is why the fuse keeps blowing. Why does the fuse keep blowing on my air conditioner? The most common cause of the problem you are having is a defective A/C clutch relay. Which is why the fuse keeps blowing. The relay is located in the auxiliary relay box #1 (see diagram below). Why does the fuse blow on the pink stripe? Thank you for asking your question on JustAnswer. There is a short...
Most popular

How to identify a cylinder head or block?

How to identify a cylinder head or block? Identifying A Cylinder Head Or Block- When the identity of a head or block is not known, it is best to first attempt to locate an identifying number or mark. A casting number is usually stamped or cast into the cylinder head or block. All casting numbers known to AERA have been listed in this manual. What should the thrust of a cylinder block be? For clockwise rotation, stand in front of the engine and face toward it. The major thrust surface is the left side of each bank of cyl­inders (toward...
Most popular

How to use custom fonts iPad?

How to use custom fonts iPad? You can download fonts from the App Store app , then use them in documents you create on iPad.After you download an app containing fonts from the App Store, open the app to install the fonts.To manage installed fonts, go to Settings > General, then tap Fonts. How do I get the symbol on my iPad? Do one of the following:Add a new signature: Tap Add or Remove Signature, tap. , then use Apple Pencil or your finger to sign your name. To use the signature, tap Done, or to draw a new one,...
Easy tips

What was the horsepower of the 1968 Corvette?

What was the horsepower of the 1968 Corvette? Original 1968 Chevrolet Corvette 427! Chevy’s shark-like third generation Corvette (C3), new for 1968, brought revolutionary new styling to America’s Sports Car compared to the C2. With horsepower wars still in full swing, the *base* 1968 Corvette packed 300 HP, and buyers could choose from three different 427 cid powerplants. Why was 1980 such a bad year for corvettes? Whoever signed off on this rolling monument to bad taste should have been hanged, or better yet, forced to drive one. It would have been more painful. In general, 1980 was a lousy...
Common questions

What are the specifications of a 1952 Chevy truck?

What are the specifications of a 1952 Chevy truck? 1952 Chevrolet Truck Specifications. The 1952 Chevrolet short-bed light pickup truck is sought-after by customizers, hot rodders and old truck collectors. What was the owner's manual for a 1957 Chevy? 1957 Chevrolet Passenger Car Owner's Manual 1957 Chevrolet Passenger Car Specifications 1957 "Comparison Shows..." - TOP 57-4 Booklet 1957 Servicing Chevrolet Truck Four Wheel Drive - S&M-24 1957 Servicing the Chevrolet Positraction Rear-Axle Unit Booklet 1957 "Take a ... What was the Chevy Service Manual for 1942? 1942-1948 Chevrolet Car, 1942-1946 Truck Factory Shop Manual Covering the following Chevy Models: 1942...
Other

What was the price of a 1959 Edsel Ranger?

What was the price of a 1959 Edsel Ranger? 1959 Edsel Ranger 4-Door Sedan Owned by Dolores & Jesse Hily Jr. Leechburg PA Model Number: 58D (VIN Code F) Total Production: 12,814 Original Base Price: $2,683.50 (In Canada: $3,279.00) Curb Weight (lbs): 3,676 (3,775 if V8) Wheelbase (in.): 120.0 Length (in.): 210.9 Width (in.): 79.8 Height (in.): 56.0 (56.2 if 8.00x14 tires) What kind of car was the Edsel in 1959? Original plans for the 1959 Edsel had been in place well before the 1958 model was introduced. As with the '58s, Mercury would share the body style with the...
Easy tips

When did the Chevrolet 283 engine come out?

When did the Chevrolet 283 engine come out? Origins The 283 was introduced in 1957 following the 265 that broke the small-block V-8 ground in 1955 when the 265 was installed in Corvettes. In the 1950s and 1960s, Chevrolet engineers were an intelligent, aggressive and competitive bunch. What kind of engine does a Chevrolet Biscayne have? While most Biscaynes were sold with a six-cylinder engine through the late 1960s, the V8 engine became the more popular powerplant by the early 1970s. 1. The Biscayne was usually built as a two- or four-door sedan, although a four-door station wagon was available...
Most popular

What kind of car was the 1972 Mustang?

What kind of car was the 1972 Mustang? 1972 Ford Mustang Project car. It has a 302, new brakes, aluminum wheels, new full exhaust and gas tank, headers and a new rebuilt Elderbrock carb. More Info › 1972 Ford Mustang Mach I newly finished. Real sweet ride 351 auto and # matching. all new even the insulation changed out for that new car smell. Needs nothing ready for the summer. What was the size of a 1971 Ford Mustang? The year 1971 brought sweeping changes to Ford’s classic Mustang, not all of which were welcomed. The car grew in size...