Common questions

Is it normal to have orange engine warning light?

Is it normal to have orange engine warning light? As it is a constantly on orange light & Cali has not lost power & drives as normal they are happy for me to drive it till then, but if anything changes to get Roadside Assist to recover it to MK Van Centre. What does the engine management warning light mean? The engine management warning light is different from the other lights on your dashboard, as it doesn’t alert you to a specific fault. Unlike the coolant temperature warning or low oil level warning lights, the engine management light (EML) can...
Other

How long are the belts on a 569 John Deere baler?

How long are the belts on a 569 John Deere baler? DescriptionBelt QTYBelt WidthBelt Length47”524”47”529” How tight should round baler belts be? On New Holland balers, the belts are not tight when the tailgate is closed with no hay in the baler. If you push against the belt at the back of the baler, you can probably push the belt in 2 to 3 inches. If the belts go any farther than that, you could have some belts longer than others. How much is a new John Deere round baler? By keeping it simple, the baler comes in the affordable...
Other

How much is a 2004 f250 Lariat worth?

How much is a 2004 f250 Lariat worth? 2004 Ford F-250 Super Duty Retail PricesTrimMSRPCarGurus Instant Market ValueLariat Crew Cab RWD$34,110$11,940XLT Extended Cab LB 4WD$32,650$12,051Lariat Crew Cab LB RWD$34,310$11,643XLT Extended Cab RWD$29,310$9,110 How much does a 2004 f250 cost? F250 TrimsTruckOriginal MSRP / PriceHorsepowerSuper Duty F-250 Crew Cab 172' Lariat 4WD$36,600 / N/A260Super Duty F-250 Crew Cab 172' XL$26,185 / N/A260Super Duty F-250 Crew Cab 172' XL 4WD$29,265 / N/A260Super Duty F-250 Crew Cab 172' XLT$31,045 / N/A260 When was the 2004 Ford F-250 lariat purchased? No accident or damage reported to CARFAX. 1st owner purchased on 03/24/04 and owned...
Other

Which is the best water pump for Cummins N14?

Which is the best water pump for Cummins N14? This Cummins N14 Water Pump is supplied with a top quality mounting gasket, and comes complete with a quality mounting gasket and other accessories (seals/gaskets) necessary to properly complete the installation. A new pump will allow your rig's engine to enjoy the benefits of proper water flow, such as maximum cooling. What are the different types of industrial pumps? The applications of these pumps mainly include building services, domestic, industrial, commercial, rural, municipal, & rainwater recycle applications. These pumps are apt for shifting stormwater, subsoil water, sewage, black water, grey water,...
Easy tips

Can a Ditch Witch stand on skid steer?

Can a Ditch Witch stand on skid steer? Designed for demanding jobsites and built to outperform, a Ditch Witch stand-on skid steer will deliver unbeatable performance—time and time again. What kind of engine does Ditch Witch use? Ditch Witch RT 12 Walkbehind Trencher Vanguard 16hp gasoline Engine This trencher was being used to trench into sandy dirt to run Pvc piping for security company cctv system. It was used for 6 weeks and has only 135 hrs of use. IT IS LIKE NEW! Where can I get a Ditch Witch drill? Small on footprint. Helping You Cover More Underground. American...
Common questions

What are pilot controls on a skid steer?

What are pilot controls on a skid steer? Pilot controls are where the joystick directly moves a small hydraulic valve. The small hydraulic valve moves a large hydraulic valve which moves your cylinders. You get some feedback, no delay, and don't wear out your wrists. You can get pilot H controls or pilot ISO controls. What are pilot controls? Pilot controls allow operators to quickly and easily switch from a backhoe to an excavator operation pattern, all without having to reconfigure muscle memory. Features can be hydraulically linked beyond the servo control. Operators can take advantage of automatic stabilizer options....
Most popular

What is a Hydro Vac Truck?

What is a Hydro Vac Truck? Hydrovac trucks are a class of industrial vacuum trucks used primarily for digging and excavation purposes. What is a hydro vac used for? One of the most common uses of hydro excavation is daylighting. This is the practice of digging to expose and locate underground utilities. During daylighting the hydro excavation truck will use water to break up the ground and the vacuum system to remove the soil onsite. How does a Hydro Vac Truck work? As mentioned above, hydrovac excavation uses pressurized water and air vacuum. The air vacuum hose is used to...
Most popular

Why is my Detroit Series 60 hard start?

Why is my Detroit Series 60 hard start? I have heard that check valves can be an issue on the Detroit so I replaced the check valve behind the engine and also the one that is inline on the right side of the filter housing. This seemed to somewhat help but it has not really fixed the problem much if any. Anybody have any ideas? Are there any problems with Detroit Diesel Series 60 engines? Changing the SRS (Synchronous Reference Sensor) and TRS (Timing Reference Sensor) could also help with this issue. These two sensors should be replaced at the...
Easy lifehacks

How much torque does a Caterpillar C15 engine have?

How much torque does a Caterpillar C15 engine have? CATERPILLAR C15 Essential Diesel Engine Bolt Tightening Torques CAT C15 Main Bearing capscrews step 1 = 95 Nm, 70 lb.ft step 2 = 260 Nm, 190 lb.ft What are the dimensions of a cat C15? CAT C15 Dimensions approx: length 1381 mm, 54.37 in width 926 mm, 36.47 in height 1248 mm, 49.15 Click for CAT C15 engine manuals and specs. CAT C15 Weight approx: 1469 kg 3239 lb Click for CAT C15 engine manuals and specs. CAT C15 Compression ratio 18.0:1 Click for CAT C15 engine manuals and specs. What...
Easy lifehacks

Is Cat Acert a good engine?

Is Cat Acert a good engine? acert is advanced emmisions reduction technoligy. It means that they have intake valve actuators that open the valves under pulls to help clean up exhaust output. They are good engines the only problem is the intake valve actuators go up sometimes but they are easy to change. What was the problem with my C-15 cat engine? The check engine light came on and the engine sounded like the jake brakes were engaged. Anyway i took it to a shop and they found that the exhaust manifold gasket was blown and a flex pipe was...