Easy tips

Why wont my dump trailer go up?

Why wont my dump trailer go up? If trailer seems to attempt to dump, goes up a few inches and stops, it is likely that the hydraulic pressure from the truck is going into the wrong line/coupler. Double check to be sure that pressure line into the trailer is connected to the outermost (most roadside) connection on the trailer frame. How do you test a solenoid on a dump trailer? While pushing the up button probe the solenoid at the red wire, if the light is on the solenoid is getting power. While pushing the Down button probe the terminal...
Easy tips

Can you change the controls on a backhoe?

Can you change the controls on a backhoe? For operators who are used to excavator controls or backhoe controls, using the opposite can be challenging and can cost productivity. Luckily, switching the control pattern on a John Deere excavator is quick and easy to do. SAE controls (backhoe controls or CAT controls) are the opposite. What is H pattern controls? H-pattern controls are an option for fleet owners with operators who prefer hand controls. Left and right steering levers have handles that pivot right and left for easy operation and less operator fatigue. The left handle controls the lift arms....
Easy lifehacks

Why did my Massey Ferguson start leaking oil?

Why did my Massey Ferguson start leaking oil? I just bought a Massey Ferguson 165 with a fron end loader to load and unload round bales of hay today. After about 30 minutes of light work, it started leaking what appeared to be oil from what I am now told is a "tattle tale" hole underneath. This is a small hole about a foot behind the oil drain plug with a cotter key hanging out of it. What does the power steering fluid smell like? Power steering fluid smells like burnt marshmallow and it is normally clear to amber in...
Easy tips

Which is the best telehandler for a caterpillar?

Which is the best telehandler for a caterpillar? Superior design and advanced features combine to give Cat® Telehandlers the best all-aroundvisibility and take the lead in lift and reach capability. Top performance, rugged construction for reliability and durability with low operating costs. What kind of engine does a 2012 Caterpillar have? 2012 Caterpillar, Model Engines, SURPLUS OEM NEW - NEVER USED- MECHANICAL REPLACEMENT SERVICE ENGINE SAME AS PERKINS 1104D-44T NL / WITH TURBO/ 3054 N... 0 Caterpillar, Model Engines, PREMIUM REMANUFACTURED COMPLETE *EXCHANGE WITH ONE YEAR OR 2,000 hrs. whichever occurs first, Limited Parts & Labor WARR... How many horsepower...
Easy tips

When to turn on continuous flow cat 279C?

When to turn on continuous flow cat 279C? Discussion in ' Compact Track/Multi Terrain Loaders ' started by 277, Jul 4, 2018 . Machine is a 2010 Caterpillar 279C with hi-flow. I rented a 72" low-flow brush cutter that I need to return July 5th in the morning. What are the features of a cat 226D? The 226D features the following: Industry leading sealed and pressurized cab option provides a cleaner and quieter operating environment with excellent work tool visibility. Available high-back, heated, air ride seat with seat mounted adjustable joystick controls makes the D Series the industry leader in operator comfort....
Easy tips

How to know if fuel pump is bad on John Deere?

How to know if fuel pump is bad on John Deere? Connect the other clip to one of the places where the wires were connected on the fuel line. Connect the other alligator clip from the (-) part of the battery to the other wire connection on the fuel line. Drain the fuel into the pan. Look at the fuel coming out of the line. If the fuel is pumping out very fast, the pump is working correctly. How do you put gas in a John Deere tractor? Drive the John Deere tractor onto a flat surface. Pour gas into...
Most popular

Why do I get a bus error on my iPhone?

Why do I get a bus error on my iPhone? "Bus error" is an unfortunate name for an access violation or segmentation violation - see the following article: Segmentation violation is almost always caused by a faulty software. Looking at your IOS version, I personally strongly suggest upgrading either to one of the latest 12.4T or 15.x IOSes. When did system returned to ROM by bus error? System returned to ROM by bus error at PC 0x6323F398, address 0xB0D0B39 at 12:35:09 GMT Fri Jan 27 2012 To troubleshoot this error I need to find out what kind of processor this...
Easy lifehacks

Which is the clutchless variable displacement a / C compressor?

Which is the clutchless variable displacement a / C compressor? A clutch less variable displacement A/C compressor can be found on models such as W203 C-CLass and W211 E-Class. You will not be able to check the operation of the A/C compressor clutch on such compressors because there isn’t one. The following video explains how the clutchless variable displacement A/C compressors work. What should I do if my AC compressor is not working? The compressor is made up of several pieces that are easily replaceable. With regular inspections, the part failing is spotted early enough and replaced, effectively preventing the...
Easy tips

What kind of engine does Deutz f4l1011f have?

What kind of engine does Deutz f4l1011f have? The engine Deutz F4L1011F has the following design features: integrated oil cooling system, cast-iron acoustically optimized crankcase, individual pump-injectors for each cylinder. Engine Deutz F4L1011F has the following design features: Where can I buy Deutz 1011 engine parts? As an Authorized Deutz Service Dealer, we have a huge inventory of genuine parts for Deutz 1011 engines, including models F2L1011, F3L1011, F4L1011, F2L1011F, F3L1011F, F3M1011F, F4M1011F, and BF4M1011F. Need Assistance? If you need help selecting the right part for your needs, please use our quote request form. What kind of engine does Deutz...
Easy tips

What to do if your cooling system is not working?

What to do if your cooling system is not working? If your coolant system is not producing enough pressure to open your thermostat, it is likely caused by a kink in a coolant line, a leak, or a fault water pump. Visually inspect all of your lines and your radiator for signs of leaking or kinks. If you don't find any, you may need to replace the water pump. Why does the coolant in my car keep going down? If it has gone down, the coolant is either leaking or being burned.. Lack of adequate amount of coolant is solely...