Other

What does free spinning on a starter mean?

What does free spinning on a starter mean? Free Spinning Free spinning is when, for some reason, the starter gear is just spinning without contacting anything. The sound is similar to that of a small drill spinning. When this happens there can be an issue with either the flywheel or the starter. What causes a starter to spin without contact? Free spinning is when, for some reason, the starter gear is just spinning without contacting anything. The sound is similar to that of a small drill spinning. When this happens there can be an issue with either the flywheel or...
Easy lifehacks

What kind of seats did the Duster 340 have?

What kind of seats did the Duster 340 have? ©2007 Publications International, Ltd. Bucket seats with a center console and floor shifterwere optional in the 1970 Plymouth Duster 340. Since it was a member of the Rapid Transit System, the Duster 340 was treated to an array of performance enhancers, including heavy-duty underpinnings, front stabilizer bar, and six-leaf rear springs. What kind of engine does a Dodge Duster have? ©2007 Publications International, Ltd. The 340-cubic-inch engine made close to 325 horsepower, and the Duster came with an array of performance enhancers. In the Duster, the engine came with a heavy-duty...
Easy tips

How do you tell someone thank you for responding?

How do you tell someone thank you for responding? How to Respond to Thank You (In Any Situation)You're welcome.You're very welcome.That's all right.No problem.No worries.Don't mention it.It's my pleasure.My pleasure. How do you respond professionally? So here are seven tips to keep your emails professional and effective:Keep it quick, simple, and focused. Format for clarity. Avoid jargon, buzzwords, all caps, all lowercase, emoticons, and textspeak. Don't keep them waiting for a reply. Read and respond to the whole email. Never hit “Send” when you're angry. Is it thank you to or thank you too? In these situations — when a...
Easy lifehacks

How to rebuild a Chevy GM 235 engine?

How to rebuild a Chevy GM 235 engine? Chevy GM 235 Engine Rebuild. A grungy Chevy GM 235 came in for a complete engine rebuild. I love these chunky old classics. It’s getting the works, starting with a teardown and inspection to make sure there is no damage or cracks. Machine Services- Bore and hone the engine block, Grind the Crank and Cam, Valve Job on the cylinder head. Is the Chevy 235 engine the same as the 261? 1. The rear of every Chevy '6' block (216, 235, or 261) is the same from 1937 through 1962, and the...
Easy tips

What are the signs of trunk lift support shocks?

What are the signs of trunk lift support shocks? Common signs include the trunk lid being hard to open, not staying open, or not opening at all. What are the trunk lift support shocks? 1. Trunk lid is hard to open What should I do when installing a new shock absorber? When installing new shocks, the goal is to tighten them just enough that there is no play or chattering in the suspension over bumps. But not so much that it adds any noticeable resistance to the shock’s pivot points. After adjusting the tension on each bolt, bounce the suspension...
Easy lifehacks

Why does my car randomly wobble?

Why does my car randomly wobble? The most common cause of vehicle wobbles in this speed range is a bent wheel or mildly out of round tire. The most common cause of vehicle shakes at 50 mph or higher is tire balance. Again, transmission or drive lines can cause this, but the tires should be the first thing to have checked. When is the worst year for PT Cruiser problems? In general, 2006 is the worst year for PT Cruiser problems. Here the engine light is constantly on and the engine idles rough. The engine light will repeatedly turn on...
Other

How can I check the coolant level in my radiator?

How can I check the coolant level in my radiator? Check into the radiator’s filler neck. The coolant’s level should be positioned at the neck’s top portion. If needed, fill it up with a 50/50 mixture of coolant fluid. Put back the cap onto the radiator through turning it clockwise. Start and then idle your car’s engine. Allow your engine to warm to the standard operating temperature. Where do I find the coolant reservoir on my car? Open your hood and locate your radiator and coolant reservoir. Some older vehicles don’t include a reservoir, but most modern vehicles have a...
Easy tips

Why is it sparking when I try to jump my car?

Why is it sparking when I try to jump my car? The battery cables can spark if the cables are installed in the improper order. When attaching the battery cables, place the positive cable on first and then the ground cable. Do not allow the cables to touch on the free end not yet hooked into another battery while the cables are connected to the first battery. What to do if you get a spark while jump starting a car? In any phase, you get the spark while pursuing the jump-start, carefully clasp up the red jumper cable to the...
Easy lifehacks

What happens when you turn on the windshield wiper switch?

What happens when you turn on the windshield wiper switch? 1. Windshield wipers won't turn on or off. When you turn the windshield wiper switch on, the wipers are supposed to move from drivers left to right in a curved pattern. What to do when your wipers won't turn off? You can either take the motor apart and clean the contact ring gap or replace the motor. It doesn't really explain why it keeps going on the slow speed especially when i turn on the intermittent then go back to off. When i do this the wipers pick up speed...
Common questions

What causes wear and tear on fuel injectors?

What causes wear and tear on fuel injectors? Driving a car hard, combined with short start stop journeys, will increase the wear and tear on injectors. Letting the engine cool down, before shutting it off, will increase the lifespan of the injectors. This will also, benefit the rest of the engine too. What causes no power to fuel injectors? The most important signals that determine the accuracy of a signal coming out of ECU to injectors are crankshaft position sensor and camshaft position sensor, so to test a bad injector, you have to check the voltage on the injector when...