Easy lifehacks

How do you turn off the anti theft system on a 2003 Ford F150?

How do you turn off the anti theft system on a 2003 Ford F150? How do you turn off the anti-theft system on a Ford f150?Turn off the ignition and check your doors – all of them have to be closed.Insert the key in the ignition and turn it to “On”.Triple-push the power door unlock button.Turn the key to “Off”.Push the power to unlock the button 3 times again. How do you reset a TCM Ford F150? In the case of a Ford, the reset button will be the only button on the dash and is usually situated on the...
Easy tips

Is the Ford Explorer Sport the same as the explorer?

Is the Ford Explorer Sport the same as the explorer? Will 2000 Ford Explorer 4.0 V6 two door fit a 2007 4.0 V6 4 wheel drive Ford Explorer 36 people found this helpful. Will a 2006 Ford explore 4.0 fit a 2004 9 people found this helpful. Is the 201 Explorer Sport and a 201 Explorer Trac 4.0 the same Is the Ford Explorer the same as the Ford Trac? 10 people found this helpful. GuruVVQ3M, no the Sport and Sport Trac, are completely different, the Sport is still the normal explorer but with only front doors, the sport trac...
Most popular

How to remove Ford dash and instrument cluster?

How to remove Ford dash and instrument cluster? Removal Ford dash & instrument cluster 2002 -2005 - YouTube Trouble With Noisy Pipes? :06 - GEICO Insurance If playback doesn't begin shortly, try restarting your device. Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. How do you remove the gauge cluster from a car? Gently pull the bezel off the dashboard, exposing the gauge cluster assembly. Unbolt the gauge cluster from the dashboard, using a 1/4-inch ratchet, extension and socket. Place the...
Other

How many gallons of gas does a Ford Freestar hold?

How many gallons of gas does a Ford Freestar hold? 263 lb-ft....SEL Standard 4dr Wagon. 2004 Ford Freestar Specs.FuelFuel tank capacity26.0 gal.EPA mileage estimates16 City / 23 Hwy How much does a 2007 Ford Freestar weight? 3,809 to 4,275 lbs 2007 Ford Freestar/Curb weight How big is a Nissan gas tank? 16.2 gallons Compare Side-by-Side2019 Nissan AltimaAnnual Fuel Cost*$1,500Cost to Drive 25 Miles$2.48Cost to Fill the Tank$51Tank Size16.2 gallons How much does a 2004 Freestar weigh? 4,275 lbs 2004 Ford Freestar/Curb weight How much can a 2004 Ford Freestar tow? 3,500 lbs 2004 Ford Freestar/Towing capacity What engine does a 2004 Ford Freestar...
Most popular

Is the Jaguar F-Type rear wheel drive?

Is the Jaguar F-Type rear wheel drive? The Jaguar F-Type R Coupe is one of the most desirable sports cars around. For a sports car the F-Type comes with a surprising list of powertrain and drivetrain options, with rear-wheel drive and all-wheel drive, manual transmission and automatic transmission and V6 and V8 models all being available. What is the difference between Jaguar F-Type S and R? Under the hood of the F-TYPE R sits a supercharged V-8 engine. Meanwhile, the F-TYPE S produces 380 horsepower from its supercharged V-6 engine. You can expect to hit 60 mph in blistering-fast 4.8...
Easy tips

Where is the idle air control valve on a 2004 Ford f150?

Where is the idle air control valve on a 2004 Ford f150? The idle air control valve is located on the driver side rear portion of the throttle body on the 2004 Ford F-150. How to reset the idle air control valve? Turn the ignition ON and leave on for several seconds then turn the ignition OFF to allow the ECM to reset the IAC valve. You should be good to go. If you need to adjust your minimum air (idle speed), click here. Why is my idle speed control valve not working? One common problem is a buildup of...
Most popular

Where is the oil pump located on a Ford F-150?

Where is the oil pump located on a Ford F-150? The mounting location on the engine is called the pump face. If the surface is warped too much, the pump will not sit correctly. Behind the pump assembly is the oil pressure relief valve, valve ball and spring. Remove and clean them. Installation is the reverse of the removal with two special conditions. How do you change the oil in a Ford F-150? The oil will drain quicker when the cap is unscrewed from the top of the block. Loosen the six oil pump bolts, and then proceed to remove...
Easy lifehacks

Where to find the engine number on a Cadillac?

Where to find the engine number on a Cadillac? For a printable PDF engine ID guide, please visit the tech section of our web site. The first step is to ID the engine block. The block casting number is found at the rear of the Cadillac engine, between the intake manifold and transmission bell housing, right next to the oil pressure sending unit. What are the engine numbers on a Cadillac 472? Note that the '68-'69 (and a few rare '70 472s) use a block that looks identical at first glance, but bears different casting numbers (ending in 6238), has...
Easy tips

Why is my Ford Expedition engine cutting off while driving?

Why is my Ford Expedition engine cutting off while driving? Shortly after the engine would stutter and sometimes stall and would restart. Took back to our guy and we were having a devil of time repeating the experience. Eventually he finds a lose ignition wire and believes that was the fix. Can a 4.6 intake manifold be replaced? You must understand that replacing the 4.6 ford engine intake manifold is a complex, expensive, and time-consuming job. The manifold is under several layers of vacuum lines, wiring, linkages, and other vital parts of your car. A single mistake could lead to...
Easy tips

Can you reuse Ford head bolts?

Can you reuse Ford head bolts? Head bolts removed from an engine running with a blown head gasket can be rusty. A head bolt should not be reused if the threads are galled or badly damaged. What are the torque specs of a Ford 2.0L? 15 180 20 SPI SOHC - Camshaft Position Sensor. Type: 21 252 29 SPI SOHC Oil Drain Plug to Oil Pan. Type: 33 396 45 SPI SOHC - MTX 75 and MTX 285 Manual Transaxle drain plug. Type: What are the torque specs for the head and intake as well? What are the torque specs...