Most popular

Is 210 degrees too hot for transmission?

Is 210 degrees too hot for transmission? The ideal operating temperature of transmission fluid is 175 degrees. Overheating occurs after the temperature surpasses 200 degrees, and the failure rate doubles for every additional 20 degree increase after that. When does the Trans temp and OD light come on? Transmission Temperature light only comes on when the transmission has reached the operating limits and tells the temp sender to send a warning. The OD light is the Over Drive light. There may be several reasons causing the Trans. Temp light to come on. What does the transmission temperature warning light mean?...
Easy lifehacks

Is 2008 Dodge Avenger SXT a good car?

Is 2008 Dodge Avenger SXT a good car? Spacious and fuel-efficient, the 2008 Dodge Avenger is a viable entry in the midsize sedan segment. However, its love-it-or-hate-it styling, budget interior materials and tepid driving dynamics are liabilities against the talented import-brand competition. How many kW does a Dodge Avenger SXT have? Specs datasheet with technical data and performance data plus an analysis of the direct market competition of Dodge Avenger SXT 2.7L V-6 automatic (aut. What are the specs of a 2008 Dodge Avenger? 2008 Dodge Avenger SXT 2.7L V-6 automatic (aut. 4) (model since early-year 2008 for Europe export)...
Other

What kind of heater does a Dodge Journey have?

What kind of heater does a Dodge Journey have? I have a 2010 Dodge Journey. When the heater is on, I get hot air on the driver side but cold air on the passenger side. Dodge Repair Questions? Ask a Mechanic for Answers ASAP By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them. I have a 2010 Dodge Journey. Why does my Dodge Journey have poor heat? Ok since you have heat on the drivers side it's probably not the blend door...
Easy lifehacks

Which is the best cold air intake for a Dodge Ram?

Which is the best cold air intake for a Dodge Ram? With it, you’ll get extra HP, torque, and your engine will work more efficiently. I did a lot of research before I found the Best Cold Air Intake For Dodge Ram 1500 5.7 Hemi. As a matter of fact, I picked three systems from leading brands. These will fit your Dodge perfectly and give an instant boost in performance. Why do cold air intakes have an advantage? Cold Air Intake Systems utilize a longer intake tube than stock intakes and relocate the air box outside of the engine compartment....
Other

Is the 1996 Dodge Ram 3500 dually diesel?

Is the 1996 Dodge Ram 3500 dually diesel? THIS IS A GREAT WORK TRUCK, SURE THE PAINT IS FADED, HEADLINER IS COMING DOWN AND HAS SOME RUST HERE AND THERE BUT ITS A 5.9 CUMMINS DIESEL DUALLY! CALL TODAY FOR THE DETAILS ON THIS TRUCK! What kind of engine does a Dodge Ram have? The truck is a 1993 Dodge Ram D350 with a 5.9 Cummins and Getrag 5 speed transmission. The truck only has 104,380 miles on it, engin, chassis and body. The odometer and speedo work and always have since I've owned the truck. What's the tow capacity...
Common questions

Why is the ESP light on my abs not working?

Why is the ESP light on my abs not working? A technician should retrieve the codes in the computer to see if there are any indicators as to what is causing this light. The wheel speed sensors are the likely cause of the ABS Light, ESP Light, and for the speedometer not working. Is the speedometer not working and ABS and brake light stay? Re: Speedometer not working and abs and brake light stay... You can't post conmments that contain an email address. An expert who has achieved level 1. An expert whose answer got voted for 2 times. Re:...
Common questions

How do you install a new PCV valve?

How do you install a new PCV valve? To install the new valve, first, attach the valve to its hose. This is much easier to do now than when the valve is installed in the engine. If your valve is mounted in a convenient location, just press it into place and you're done. If it's less than convenient, grasp the PCV valve with your pliers and carefully press it in. How do you install a PCV valve on a tribute? Install the new PCV valve by slipping it into place then turning it a quarter-turn clockwise. Reconnect the electrical connection...
Common questions

How do you know if crack is serious?

How do you know if crack is serious? A crack is more serious when it's between five and 15 millimeters wide (0.5 to 1.5 centimeters, or up to half an inch) as the cause could be more serious than simply dried out plaster or a house that is settling. When should I be worried about crack? Severe – cracks up to 25mm wide could be a sign of structural damage and should be inspected and repaired by a professional. Very severe – any crack above 25mm in width indicates serious structural damage and will need major repair work, which could...
Common questions

What kind of bolts do you use to remove cylinder heads?

What kind of bolts do you use to remove cylinder heads? Cylinder heads come in many different configurations that each have their own specific steps to remove. There are two types of removal: head bolts from a pushrod style motor and the overhead cam style engine. Each one has differences but the tools used will be similar and the precautions the same. What do head bolts do on an engine? These head bolts hold the cylinder head to the engine block. The head bolts are long bolts that go through the cylinder head and head gasket and when torqued properly...
Most popular

How do you clean a windshield wiper motor?

How do you clean a windshield wiper motor? First, try cleaning your windshield thoroughly – dirt and grime can actually cause this annoying streaking and smearing. Clean your wiper blades by wiping them down with warm, soapy water, and wipe the edge of the blade with rubbing alcohol. Why do my windshield wiper blades move slower than normal? If you activate the wiper switch to a fast speed or high setting and the wiper blades move slower than they should, it may be caused by a problem with the wiper motor. Sometimes the mechanical components inside the motor will be...