Common questions

Where did the Dodge Ram 3500 come from?

Where did the Dodge Ram 3500 come from? 1st owner purchased on 11/30/06 and owned in IA until 01/14/13 • 2nd owner purchased on 05/02/13 and owned in NE until 06/27/15 • 3rd owner purchased on 07/15/15 and owned in NE until . How many miles does a Dodge Ram 3500 drive? 1st owner purchased on 05/31/06 and owned in GA until 08/17/09 • 2nd owner purchased on 08/17/09 and owned in GA until 09/11/14 • 3rd owner purchased on 02/09/15 and owned in GA until 04/29/21. 1st owner drove an estimated 15,177 miles/year • 2nd owner drove an estimated...
Common questions

Is there any way to bring back yesterday?

Is there any way to bring back yesterday? YESTERDAY has passed forever beyond our control. All the money in the world cannot bring back YESTERDAY. We cannot erase a single word we said. YESTERDAY is gone. With its possible adversities, its burdens, its larger promise. TOMORROW is also beyond our immediate control. But it will rise. For it is as yet unborn. Why did my friend leave the safe open last week? Last week my friend went to the safe to put something into it and as usual it was still left open as the locking hinge needed the key...
Other

What is the difference between RAM Big Horn and Laramie?

What is the difference between RAM Big Horn and Laramie? On the exterior, the Big Horn has a side step, a chrome grille, and bumpers, which the Laramie does not have. In the front, it has halogen bulbs, fog lights, and the traditional RAM hood. Both models have the 5″ 7′ bed space, but the Big Horn does not offer the multi-functional open tailgate like the Laramie. What kind of engine is in a Dodge Magnum? Chrysler 360 (5.9 L) Magnum V8 The Chrysler/Dodge 360 Magnum is a 5.9 l (5,899 cc, 360.0 cu.in.) natural aspirated V8 90° four-stroke gasoline...
Common questions

How to check the Mercedes-Benz Sprinter 2500 parts?

How to check the Mercedes-Benz Sprinter 2500 parts? First, you can use the Vehicle Selector above. Simply choose the year, make, model, and engine. Any category you select will show parts that fit only your selected vehicle. Or you can click on your Mercedes-Benz Sprinter 2500 from the list of Mercedes-Benz models below. What kind of engine does a Dodge Sprinter have? 2007-2019 FREIGHTLINER MERCEDES DODGE SPRINTER ENGINE OM642 V6 ZERO MILE ENGINE (Fits: Dodge Sprinter 2500) Where can I find my Mercedes Benz Sprinter VIN number? Please check Mercedes-Benz SPRINTER car parts catalog for additional information if you're looking...
Other

How to turn on the maintenance required light?

How to turn on the maintenance required light? 1. Turn the ignition switch to the ON position. 2. Set the Odometer/Trip Display to the ODO mode. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 5. The maintenance required light will: - 5a. Illuminate solidly for three seconds - 5b. What's the difference between a check engine light and maintenance required light? Unlike a check engine light, a maintenance required light is based strictly on a car’s mileage and when the light...
Easy tips

Where is the TFP sensor located?

Where is the TFP sensor located? The Transmission Fluid Pressure Sensor/Switch (TFPS) is usually found attached to the side of the valve body inside the transmission, although sometimes it may be found screwed into the side of the transmission case/body itself. What does low transmission pressure mean? Pressure that are lower than specifications are usually caused by leaking seals or a worn oil pump. A few different things can trigger the P0868 trouble code, including: Insufficient transmission fluid levels due to leaks in the system. Slipping or otherwise malfunctioning transmission. Is the Plymouth Voyager the same as the Chrysler Voyager?...
Common questions

How do you program a crankshaft sensor without a scanner?

How do you program a crankshaft sensor without a scanner? Accelerate the vehicle to 55 mph at part throttle. Cruise at 55 mph for another 5-6 minutes. Decelerate to 45 mph without using the brakes, and maintain 45 mph for 1 minute. Perform 4 deceleration cycles, without using the brakes, of 25 seconds each where no specific speed is necessary. How do you replace the crankshaft position sensor on a Dodge Ram? Pull the old sensor out, and set it aside. Position the new sensor in the same way the old one came out. Getting the bolts started again can...
Common questions

How many doors does a ram truck have?

How many doors does a ram truck have? Ram 2500/3500 (2009 - present) 1 mega cab = 4 full-size doors (larger rear doors than quad) 2 crew cab = 4 full-size doors (2010 – present) 3 quad cab = 4 full-size doors (2009 only) 4 regular cab = 2 full-size doors How big are the tires on a Dodge Ram 1500? Tire Sizes. Dodge Ram 1500 Options. 17-Inch. 265-70-17. 4x2 Crew Cab 4x2 Quad Cab 4x4 Crew Cab 4x4 Quad Cab. 20-Inch. 275-60-20. 4x2 Crew Cab 4x2 Quad Cab 4x4 Crew Cab 4x4 Quad Cab. When does a Dodge Ram...
Common questions

Why is my water pump on my Dodge Dakota not working?

Why is my water pump on my Dodge Dakota not working? Any faults with the water pump could be just routine maintenance or causes by other issue under the hood which in turn create premature failure of the pump. This particular tutorial was done on a 2003 Dodge Dakota. Where is the clutch on a water pump? Some are equipped with a mechanical clutch fan such as what is shown in the video, others do not. Some water pumps can be driven by an accessories belts, other by a timing belt, they can also be hidden under a timing belt...
Easy tips

How much does it cost to change transmission fluid in a Dodge Ram?

How much does it cost to change transmission fluid in a Dodge Ram? The average cost for a Dodge Ram 1500 transmission fluid change is between $158 and $179. Labor costs are estimated between $80 and $101 while parts are priced at $78. How do you change transmission fluid in a Dodge Ram? Lower the vehicle and add the specified amount of transmission fluid minus one quart. After you have done this, run the engine at a fast idle for a little bit, then let it lower down and with your foot on the brake, move the gear selector through...