Easy lifehacks

At what speed do most of anti-lock brakes cease to work?

At what speed do most of anti-lock brakes cease to work? You'll need to be travelling at more than 30kph because many ABS systems shut off as the vehicle gets below around 10-20kph and you'll need enough speed to feel it working. 40-50kph is enough. When did antilock braking become a safety feature? Antilock braking and electronic stability control systems have immeasurably improved vehicle safety. They attract little attention, until they activate when they aren’t needed. Antilock braking systems (ABS) have been with us since the 1980s. But as of 2016, ABS has never been a federally mandated passenger vehicle...
Other

When does a GM alternator need to be replaced?

When does a GM alternator need to be replaced? A GM alternator that is producing too much voltage must be replaced. When a car does not start or the lights are dim, it may be because the voltage output has dropped lower than 13.5 volts. When this happens, the battery is not being charged, and the electrical systems of the vehicle will fail. What do you need to measure the output of a GM alternator? It is pretty simple to measure the output of a GM alternator. All you need is a voltmeter, also known as a multimeter. One of...
Easy lifehacks

What GMC has a V8?

What GMC has a V8? The land-based version of the 6.2L V8 is an available engine on the 2020 GMC Sierra SLT pickup truck, AT4 and Sierra Denali. When did the GMC V8 engine come out? Production started for 1966 and went through 1972. Prior to developing its own engines, smaller GMC's used the Pontiac V8 engine. They used the Pontiac 287-cubic-inch (4.7 L) engine for 1955 and 316-cubic-inch (5.2 L) engine in 1956, but advertised the engines as the "GMC 288" and "GMC 316". They used Pontiac's 347-cubic-inch (5.7 L) in 1957. How many cubic inches does a GMC...
Other

What was the invention of the portable radio?

What was the invention of the portable radio? A transistor radio is what made portable outdoor radio possible in the 1960s. The invention of transistors allowed to reduce radios to pocket sizes to become the most popular electronic devices in history. What should I look for in a portable radio? Below are some of the extra features you may want to consider: 1 Attachments, such as a belt clip or a carry strap 2 USB port – allows you to play your favorite music as MP3 songs using the radio’s speaker 3 Bluetooth – portable radio with Bluetooth support is...
Easy lifehacks

When to Change headlight bulbs on GMC Sierra 1500?

When to Change headlight bulbs on GMC Sierra 1500? Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs. Changing both headlight bulbs on your Sierra 1500 at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side. How to remove a headlight from a GMC Yukon? 1. Use a 7mm socket to remove two bolts from the grill 2. Use a 10mm socket to remove six bolts...
Common questions

Are all water pumps noisy?

Are all water pumps noisy? All shower pumps will make some noise, as water is being moved at a high speed and being thrust out of a pump. Depending on the type of pump, water will be moved in different ways and therefore different pumps can make noises. Why is my air pump making so much noise? To restore silence, put an extra valve in the airline tube and bleed off excess pressure. It’s also a good idea to rest the pump on a piece of carpet or foam. Another possible source of the back pressure and consequent noise is...
Easy tips

Why does my brake controller not work when I press the brake?

Why does my brake controller not work when I press the brake? It connects to the wire on this switch that carries a signal ONLY when the brake pedal is pressed. It should not have a signal at any other time. Use a circuit tester, like # 40376, to test the wires. If your brake controller red wire is not connected to the correct wire, or is loose or broken, this would cause the problem you are experiencing. Why is my brake light not working on my car? If the brake light switch is functional, you have to check for...
Common questions

What does Service StabiliTrak do to a car?

What does Service StabiliTrak do to a car? Service Stabilitrak/ Traction control off/ ABS lights on/ Service Engine light on I turn the key and the lights come on for service Stabilitrak, traction control off, abs, and check engine, and the car wont start. Why does my car automatically turn off stability control? The key to the situation is the lit-up Check Engine Light. Once that is lit up, the stability control, traction control, ABS, and Cruise Control are all automatically disabled because those functions require that the engine be operating optimally. What do you do when your car won't...
Most popular

Are most car seats interchangeable?

Are most car seats interchangeable? On most cars, seats are left and right specific, but some DO happen to be interchangeable. themselves -- there's no reason not to try it. Saturday morning and try reinstalling one on the other side. If it works, finish the job. What kind of seat does a 1990 Chevy S10 have? Find out now. 1990 Chevy S10 LH Black Outer Seat Trim Plastic 2 pieces OEM cover Driver Side!! Can a 1992 bucket seat Mount to a 1989 bucket? Unfortunately the tracks that the 40/20/40 seats mount to won't easily mount to the buckets used...
Most popular

Is there a plug gap on a GM Truck?

Is there a plug gap on a GM Truck? Click to expand... okay thanks. to be honest ive never changed plugs on a car/truck before, just powersports and power equipment where i always double check the gap. I would still double check the gap on them. What are the symptoms of incorrectly gapped spark plugs? An engine that hesitates, or stumbles, upon acceleration is often the result of incorrectly gapped spark plugs. If spark plugs are gapped too wide, the ignition spark loses some of its strength as it crosses the spark plug gaps. This can result in engine hesitation....