Other

Is crankshaft sensor the same as camshaft sensor?

Is crankshaft sensor the same as camshaft sensor? Cam sensor and Crank sensor are not the same. The Cam sensor is mounted on the Cam shaft and Crank sensor on the crankshaft. Both are used to measure the engine rpm. the crankshaft sensor and the Camshaft sensor are actually the same part number. Where are the crankshaft and camshaft sensors located? Go to the drop-down menu bar at the lower left corner of the Waveform Library window and select Crankshaft sensor (Hall effect) or Camshaft sensor (Hall effect). An engine’s CKP and CMP sensors provide the Engine Control Module (ECM)...
Common questions

When to replace a transmission shift control module?

When to replace a transmission shift control module? If your transmission shift control module is defective, it will result in the failure of the automatic transmission system. Your car's transmission will be unable to respond effectively when you try to accelerate. If your vehicle displays any of the aforementioned symptoms, you should replace the tranmission shifter control module. Where is the shift solenoid located in a car? The engine control module or the transmission control module in the vehicle's engine controls the shift solenoid electronically. The solenoid valve opens when electrical signals are sent to appropriate shift solenoid. The opening...
Common questions

What is a original question?

What is a original question? An original question is one that shows you have tried to connect different ideas, and perhaps have found a conflict. You ask a question in the hope that this conflict will be resolved, so that you may continue your original train of thought. What is the answer to the question why? The best answer to 'why' is 'why not'. People think so much about - 'why should I do…/ why it's happening…/ why it's like the way it is…'- that they never get time to look beyond them. Just once in life try to think...
Easy tips

How big are the block bolts on a Mustang?

How big are the block bolts on a Mustang? Bellhousing to block bolts are all SAE 7/16-14. The top two are 1 7/8" long and the other 4 are 2 1/4" long. Transmission Mount to Transmission= 1/2" X 13 X 1-1/2” long. Clutch Fork Cover Bolt Size---- 6mm x1.0 with 8.8 Hex Head ( or it's nothing much more than a small course-thread sheet metal screw with an 8mm head). How big is the strut mount on a Mustang? OH and it is probably already said but the 4 bolts holding your strut mount and probably have or maybe not...
Most popular

How much can a 2003 F-150 pull?

How much can a 2003 F-150 pull? The 2003 Ford F-150 has a maximum towing capacity of 7,700 to 8,000 pounds depending on the trim and options for the vehicle. This means that it has a tongue weight of 770 to 800 pounds on the rear hitch. The truck has a payload capacity of 1,460 to 1,660 pounds. How much can a F-150 5.0 pull? Towing PowerEngineMax. Towing3.3L Ti-VCT7,700 lbs.2.7L EcoBoost® Twin-Turbocharged V69,000 lbs.3.0L Power Stroke® Turbo Diesel V611,400 lbs.5.0L Ti-VCT V811,400 lbs. How much can an F-150 comfortably tow? But as a general response, the F-150 can tow between...
Common questions

Where to plug in a satellite radio antenna?

Where to plug in a satellite radio antenna? Satellite Radio & Cellular Antenna Relocation Guidelines The recommended location for plugging the remote antenna cable into the vehicle system on the blue connector on the passenger side of the vehicle. Purchase the appropriate body cable to meet your routing needs. Where can I find a coaxial antenna connector? Often used to replace SMA, the connector can be seen in cellular base stations and defence applications. This 50Ω subminiature coaxial connector has a frequency range extending up to 18GHz. A smaller 50Ω connector, most often found on the back of desktop modems...
Common questions

Are there any problems with the Ford Escape transfer case?

Are there any problems with the Ford Escape transfer case? A known common problem on 2001-2012 Ford Escape awd models: the transfer case on awd models is mounted near the exhaust which bakes and dries lubrication grease in the transfer case resulting in bearing failure and lock-up conditions which can cause a crash at highway speeds. Tl-the contact owns a 2015 Ford Escape. Are there any problems with the 2011 Ford Escape? See all problems of the 2011 Ford Escape . Ford part bl8z-7251-a in 2001-2012 Escape/Mercury mariner/Mazda tribute,& similarly designed Ford explorer,edge, taurus, and several Mazda--all wheel drive and...
Most popular

When to trade in a 2006 Ford Fusion?

When to trade in a 2006 Ford Fusion? In 2013, the car reached around 96,000 miles and started to develop some transmission problems. Dealer inspected the car and would not be a cheap fix since the extended warranty had ended. Decided to trade the car in and avoid major repairs in the future. Was this review helpful? Is the Ford Fusion a good used car? Great car but... Purchased used in 2006 with 1,200 miles on the OD. For the first three years car was brilliant. No problems, just routine maintenance, brakes, oil changes, ect. Ride was excellent and the...
Most popular

Are Ford Fiesta Vans reliable?

Are Ford Fiesta Vans reliable? Reliability and Safety Petrol models are rarer, but the engine also seems to be reliable. ESC electronic stability control is only standard on ECOnetic and Sport Van models at present. Driver and front passenger airbags are standard, but head, thorax and driver's knee airbags are only standard on the Sport Van. Is the Ford Fiesta the same as the Ford Festiva? Not to be confused with the Ford Festiva. The Ford Fiesta is a supermini marketed by Ford since 1976 over seven generations. Over the years, the Fiesta has mainly been developed and manufactured by...
Most popular

How much does it cost to replace a master cylinder in a Ford F150?

How much does it cost to replace a master cylinder in a Ford F150? The average cost for a Ford F-150 brake master cylinder replacement is between $268 and $341. How do you check the master cylinder on a Ford F150? Apply pressure to the brake pedal until it comes to a stop and then hold the pedal there, sustaining the pressure. If moments after the brake pedal has come to its initial stop it begins to drop down again slowly, then the master cylinder is not functioning properly and will most likely need to be replaced. What kind of...