Common questions

What kind of tool do I need to remove inner tie rod?

What kind of tool do I need to remove inner tie rod? A wrench, a ratchet set, needle nose pliers, mallet or hammer, grease gun and an inner tie rod tool are needed to remove the inner or outer tie rod ends from the steering knuckle or ball joint depending on which tie rod end. Go through the steps to remove then back through as you put the steering knuckle and tie rod ends back together. How do you remove the tie rod from a cotter pin? Use a properly sized ratchet to remove the castle nut. This is the...
Easy tips

Is heater core expensive to fix?

Is heater core expensive to fix? The average cost for heater core replacement is between $857 and $1,008. Labor costs are estimated between $578 and $730 while parts are priced at $278. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed. Can a car heater core leak into the cabin? Even if you have an older vehicle with the heater core outside the cabin, leaking fluid can still find its way into the cabin through the ventilation ducts. Having coolant leaking into the cabin...
Easy tips

Is the 2014 Dodge Ram 1500 a good truck?

Is the 2014 Dodge Ram 1500 a good truck? The 2014 Ram 1500 is a good used truck. It has top-notch cabin materials, a comfortable ride, and an available smooth-shifting eight-speed automatic transmission. The Ram 1500 also won our 2014 Best Full Size Truck for the Money award. What kind of engine does a Ram 1500 Quad Cab have? Pre-owned Ram 1500 Quad Cab models are available with a 3.6 L-liter flex-fuel (FFV) engine, with output up to 305 hp, depending on engine type. The Used 2014 Ram 1500 Quad Cab comes with four wheel drive, and rear wheel drive....
Most popular

Can you install exhaust brakes on a Dodge Ram?

Can you install exhaust brakes on a Dodge Ram? The easiest installing exhaust brake on your Ram is that of a turbo mount. These merely take the place of the cast elbow behind the turbo, and before the down pipe, just bolting in place. However, these rely on you having a stock turbo, or an aftermarket turbo with a stock style discharge. How to install an exhaust brake on a diesel pickup? - By changing the chip and installing an exhaust brake, you can unleash a ton of horsepower on your diesel pickup. We're showing you how with a 1999...
Most popular

How do you reset the Bluetooth on a 2015 Dodge Journey?

How do you reset the Bluetooth on a 2015 Dodge Journey? How do I reset my Dodge Journey radio? To reset the radio in your 2015 dodge journey vehicle, turn the ignition key to the “on” position and turn your radio on, wait ten seconds and then turn your radio off. Depress radio power button again and wait for reset. How do I reset my 2012 UConnect? Five Easy Steps to Reset UConnect®Ensure your vehicle is in park and in “Run” mode.Press and hold down the volume and tuner knob buttons at the same time.Hold down the knobs for 10...
Easy lifehacks

How many volts should a good battery have?

How many volts should a good battery have? Fully charged automotive batteries should measure at 12.6 volts or above. When the engine is running, this measurement should be 13.7 to 14.7 volts. If you don't have a multimeter to tell you the voltage of your battery, you can do a test of your electrical system by starting the car and turning on the headlights. What does 13.8V mean on a car battery? When you see 13.8 on your battery with the car running that means the battery is fully charged. In solar power systems with 12v batteries 13.8 is called...
Other

Where is the OBD2 port in my Dodge Ram?

Where is the OBD2 port in my Dodge Ram? Where is the OBD2 port in my Dodge Ram (2009 - 2018) All vehicles are equipped with an OBD port to which you can connect your klavkarr diagnostic case. Sometimes, the most difficult thing is to find this port! In order to save you time, we have made available (for free) the information uploaded by our community of tens of thousands of users. What to do if the OBD II scanner doesn't communicate with the vehicle? What to do if the OBD II scanner doesn’t communicate with the vehicle. TEST 1:...
Other

How do you pull a pressure pump out of a well?

How do you pull a pressure pump out of a well? Thread the puller into the top of the adapter. Take a hammer and tap firmly down. Then tap the underside of the T handles (both sides). Lift the puller and pull your pump out. You'll need the help of at least two more people. Thanks! How does water get from the pressure tank into my house? What to do if your submersible pump stops working? There are a number of reasons why your submersible pump might have stopped working, so it’s important to count out the easy fixes first....
Other

Are white blinker lights legal?

Are white blinker lights legal? Federal law states lights forward of the front axle may be white, amber, or yellow, and behind the front axle they may be red, amber, or white. Of course local jurisdictions can force turn signals and corner markers to be amber if they desire. Why is my right rear turn signal not working? Right, Rear Turn Signal Not Working but its a New Bulb to... Okay, I recently replaced my rear turn signal bulbs just a couple months back. Just recently, the right rear blinker indicator has been blinking really fast. Sometimes it would blink...
Easy lifehacks

What happens when you wrongly connect auto batteries?

What happens when you wrongly connect auto batteries? When the jumper cables are incorrectly connected, the polarity of the electrical system on the vehicle with the dead battery will be reversed for a few seconds. This can irreparably damage many of the sensitive electronic components that are common on today's vehicles, such as on-board computers and electronic sensors. Is changing a battery dangerous? Is there any danger to changing a car battery? Cracks and corrosion from the old battery can cause some dangerous battery acid leakage. The battery can also still produce a charge, even when the car is off,...