Common questions

What does a vapor canister purge valve do?

What does a vapor canister purge valve do? In particular, the canister purge valve is an emissions control component that allows the engine intake vacuum to take the exact amount of fuel vapors from the EVA canister into the engine intake manifold. In newer model vehicles the purge valve is electrically operated solenoid controlled by the engine computer. What's the p1443 code on a 1997 Ford Ranger? FORD RANGER CODE P1443 REPAIR - YouTube ALL THE INFORMATION YOU NEED TO REPLACE THE CANISTER PURGE VALVE ON A 1997 FORD RANGER 2.3 LITER . FAULTY PURGE VALVE TRIGGERS THE P1443 CODE....
Other

Where does the wire go on a Mercury solenoid?

Where does the wire go on a Mercury solenoid? There are four terminals on the solenoid--two large-diameter posts and two small-diameter posts. A large wire (4-gauge or larger) goes from the B+ post on the solenoid and the other large post has the large diameter wire going directly to the starter. When the solenoid is not energized, there is an open circuit between these two large wires. Can a bad solenoid be a sign of a bad starter? Intermittent operation can be a sign of a failing starter solenoid. Other issues that present like a bad solenoid. Problems that might...
Easy lifehacks

How much does a Taurus cop car cost?

How much does a Taurus cop car cost? I think that the engineers charged with turning the civilian Taurus into a police car did a good job, given the platform that they had to work with. Fleet pricing for the models purchased by my department comes to $26,659, which seems reasonable. When did the second generation Ford Taurus come out? The second-generation Ford Taurus is an automobile that was produced by Ford from 1991 to 1995, which served as the second out of six generations of the Ford Taurus. The second-generation Taurus shared all of its mechanical parts with the...
Other

What part makes clicking sounds when the battery is low or there is a bad connection?

What part makes clicking sounds when the battery is low or there is a bad connection? If you hear a chatter or a quickly repeating clicking, you're most likely dealing with a battery or alternator issue. Because the starter is not getting enough electricity to stay powered and crank the engine, the system's repeated attempts make a clicking sound. Check the battery cable connections. Why is my car key not turning in the ignition? The following three factors may explain why your key is unable to turn in the ignition: Factor 1: Bent key. Bent keys can sometimes enter the...
Most popular

Is alternator covered under used car warranty?

Is alternator covered under used car warranty? An alternator is not a maintenance item, so yes ,it would be covered by a materials and workmanship warranty. It would likely not be covered if it were damaged in an accident or as a result of an owner modification. And it has to have an actual problem when checked by an authorized repair facility. What kind of warranty does an alternator have? What is the warranty on an alternator? Most reconditioned alternators come with at least a one-year warranty, while some come with a warranty for up to three years. Some new...
Most popular

How big is a F-350 Crew Cab?

How big is a F-350 Crew Cab? F-350/F-450/F-550 Chassis Cab Dimensions and Capacities (in inches unless otherwise noted) Regular Cab SuperCab Crew Cab Exterior Wheelbase /Back-of-cab-to-axle 142/60 165/84 189/108 201/120 162/60 176/60 200/84 Overall length 225.7 249.7 273.7 285.7 246.7 261.1 285.1 Interior Seating capacity 2/3 2/3 2/3 2/3 5/6 5/6 5/6 Headroom (cu ft) What are the different types of Ford cabs? 1. The Regular/Standard Cab 2. The Super Cab/Extended Cab 3. The Super Crew/Crew Cab What Are the Ford Trim Levels Available? 1. XL Trim Level 2. XLT Trim Level 3. Lariat Trim Level 4. Raptor 5. King...
Other

What to do when it says check charging system?

What to do when it says check charging system? Battery problems - Your battery/check charging system light could be coming on because your battery is low and needs replacing. Take your vehicle to your mechanic and have them test your battery strength. How to do a charging system check using simple tests? Make a Visual Inspection of the Charging System 1. Check the charging system for warning indicators: 2. Check the alternator drive belt or serpentine belt: 3. Check your battery and battery terminals: 4. Now check the wires: 5. Check the alternator for unusual noises: Why does my battery...
Easy lifehacks

What does the headlight switch do?

What does the headlight switch do? The switch usually controls the vehicle's interior lights, the running lights, the low beam headlights, high beam headlights, and in some vehicles the automatic headlight system. As with any electrical switch, with regular use, it may eventually wear out and need to be replaced. How does a headlight switch turn on a high beam? In the same way that your headlight switch activates a relay to provide power to the headlights, operating your high beam control will generally activate a relay to turn on the high beams. In the case of dual filament headlight...
Most popular

Does 2018 Ford Explorer have auto start stop?

Does 2018 Ford Explorer have auto start stop? The 2018 Ford Explorer does have auto stop start. Why is my steering wheel not working in my Ford Explorer? If enough of it has leaked out, your Explorer will no longer have enough to properly function. This is the most common reason that the power steering stops working. Putting fluid back in may solve the problem for a bit, but if has leaked out before, it will leak out again. What's the cost of a Ford Explorer steering wheel inspection? Ford Explorer Creaking noise when turning the steering wheel Inspection costs...
Easy lifehacks

What causes a bad throw out bearing?

What causes a bad throw out bearing? A throwout bearing can fail at any time. Hard use shortens their life span. Even with “light” use drivers often make the mistake of resting their foot on the pedal slightly and increasing wear on the throwout bearing. What does a bad throw bearing sound like? The most common sign of a bad throw-out bearing is when you hear various noises when you depress the clutch pedal. But if there is too much space between the rollers, then different types of noises will start to be heard. These can include rattling, grinding, squealing,...