Common questions

What was the size of the Olds 303 engine?

What was the size of the Olds 303 engine? The 303 engine was used in various forms from 1949 to the 1953 model year, and in 1954 the engine was enlarged to 324 cubic inches. This was a result of increasing the bore from 3 3/4 inches to 3 7/8 inches. The engine was again enlarged in 1957 to 371 cubic inches and again to its final size of 394 cubic inches in 1959. What kind of engine did Oldsmobile have in 1949? For the 1949 model year Oldsmobile introduced the Rocket V-8 engine. This was a truly revolutionary development...
Easy tips

How is the oil pan gasket supposed to work?

How is the oil pan gasket supposed to work? The oil pan gasket is sandwiched between the engine block and the oil pan. The gasket acts as a seal, preventing oil from leaking from between the two components. Some oil pan gaskets are silicone and come as RTV in a tube or a caulk cartridge, even if you buy the OEM gasket from the dealer. How often should you replace oil pan gaskets? “We highly recommend replacing multi-piece oil pan gaskets each time the oil pan is removed. This will guarantee the integrity of the gasket.” Be sure the rails...
Easy tips

What are the numbers on a Holley carburetor?

What are the numbers on a Holley carburetor? Holley Carburetor Numerical Listings Carb. Primary & Primary Secondary Primary Secondary Primary Carburetor Model CFM Renew Trick Secondary Main Main Jet Metering Metering Primary Discharge Part No. No. Kit Kit Needle Jet or Plate Block Block Power Valve Nozzle & Seat Size What kind of carburetor does a 428 CJ have? Ford carburetors are identified by basic part number 9510. 428 CJ and SCJ engines came equipped with a 4 venturi (4v) Holley 4150 carburetor rated at 735 cfm. Factory carbs used vacuum secondaries with dual metering blocks -- none of the...
Other

What do torque arms and rods do for a truck?

What do torque arms and rods do for a truck? Torque arms and rods help prolong the life of driveline components by maintaining optimum driveline angles. Torque rods help absorb axle braking and driving torque which ultimately reduces suspension vibration. At TruckSpring.com we carry torque arms, rods, brackets and bushings for just about any heavy duty truck from quality OEM manufactures. When do torque rods need to be checked? Torque rods should be checked on a regular basis and at scheduled preventative maintenance inspections. When torque rod is bent When there is more than 1/8” of movement in the rod...
Easy tips

Is the 1972 AMC Javelin AMX in original condition?

Is the 1972 AMC Javelin AMX in original condition? To say the car was well kept would be putting it mildly. The AMX was in original enough condition that the basic restoration was complete in less than six months--there was no bodywork required. The entire interior, believe it or not, is the very same one that came with the car in 1972. Where does the camshaft come from on an AMC Javelin? The camshaft in the 401 is one of the results of their ongoing work, which includes replicating obsolete factory camshafts. For the Javelin's 401, a camshaft blank was...
Other

What transmission is in a 1969 Mustang?

What transmission is in a 1969 Mustang? 1969–1970Mustang 1969–1970Transmission3-speed manual 4-speed manual 3-speed automaticDimensionsWheelbase108 in (2,743 mm)Length187.5 in (4,762 mm) What transmission does a Mach 1 have? 6-speed manual transmission Mach 1 comes standard with a Tremec™ 3160 6-speed manual transmission from the Shelby GT350. For the first time, Ford has outfitted the system with rev-matching and the transmission is paired with the GT350 oil cooler system and Mustang GT's twin-disc clutch and short-throw shifter. How fast can a 1969 Ford Mustang go? 1969 Ford Mustang Mach 1 Specifications for 5.8-liter Windsor V8Power250 horsepower at 4,600 rpmTorque355 pound-feet at 2,600...
Easy lifehacks

What kind of fluid does a Ford Jubilee use?

What kind of fluid does a Ford Jubilee use? Also which area is the hydraulic fill and axles fill. I am use to an 8N and not sure on the Jubilee The correct fluid to use in the transmission, hydraulic reservoir, and rear differential section is Universal Transmission Fluid (UTF) equivalent to Ford/New Holland specification 134D. This is Ford/New Holland approved practice. What kind of oil does a Golden Jubilee tractor use? b lee. YOUR JUBILEE WILL CARRY 134 HYD OIL WHICH CAN BE PURCHASED AT ANY NEW HOLLAND (FORD) DEALER. SOME PEOPLE MAY TELL YOU TO USE 9O WEIGHT...
Most popular

How big are rear disc brakes on a Lincoln Versailles?

How big are rear disc brakes on a Lincoln Versailles? Most enthusiasts have heard at one time or another about the Lincoln Versailles 9-inch rear-disc setup. These were used on: This brake system used a 5 x 4 1/2-inch bolt pattern on 10 11/16-inch rotors. Axles were 1.53-inch ball bearing-type roller-bearing axles. How big are the rotors on a Lincoln Continental? 1984-1986 Mustang SVO; 1984-1987 Lincoln Continental, and 1984-1990 Lincoln Mark VII rotors have a 5 x 4 1/2-inch bolt pattern on an 11-inch-diameter rotor. Axles were 1.4-inch C-clip-type open roller-bearing axles. These are commonly referred to as the "small...
Easy lifehacks

How do I identify a Cadillac V8 engine?

How do I identify a Cadillac V8 engine? Block ID:The first step is to ID the engine block. One easy way to identify a 425 or 368 vs a 472 or 500 Cadillac engine block is to look at the rear of the block. Another way to identify a 425 or 368 vs a 472 or 500 Cadillac engine block is by the shape of the timing cover or the opening it covers. Where is the casting number on a Cadillac engine? The first step is to ID the engine block. The block casting number is found at the rear...
Other

When did the Chrysler Royal Windsor come out?

When did the Chrysler Royal Windsor come out? The Airflow disappeared in 1938, and the Chrysler Royal which had been introduced in 1937, entered its third year of production for 1939. Styling updates for the 1939 Chrysler included narrower running-boards, recessed headlamps incorporated into the fenders, and a chrome strip that traveled upwards on the prow-shaped nose of the cars. What was the price of a 1939 Chrysler Royal? The 1939 Chrysler Royal included a coupe priced at $920, a Victoria Coupe at $970, a brougham at $975, and a four-door sedan priced at $1,010. A long-wheelbase version with seven-passenger...