Easy tips

Can You disconnect a rack and pinion steering assembly?

Can You disconnect a rack and pinion steering assembly? Disconnect the steering joint between the steering column and rack and pinion assembly. Do not allow the column or wheel to turn while the joint is disconnected. The image above shows a steering universal coupler on the left and a rag joint on the right. I'm pointing to what is called a pinch bolt in the image on the left. How do you install a new rack and pinion? Install the new rack and pinion assembly and loosely install the rack mount bolts. Reinstall the fluid lines, replacing any O-rings with...
Easy tips

Where is the HID ballast located?

Where is the HID ballast located? Registered. Xenon Ballast/Control Module/HID Ballast is a Metal box attached underneath the head light assembly. It plugs into the headlight assembly and attached by some screws. Very easy to replace, but you have to remove the headlight assembly first to reach it. Does Philips InstantFit work without ballast? The Philips InstantFit LED T8 lamp is a simple way to instantly make your current fluorescent application more efficient. These energy-saving LED solutions seamlessly fit into existing linear fluorescent fixtures without any extra effort and utilize the existing ballasts, thus requiring no re-wiring upon installation. Do...
Easy lifehacks

What is the diagnostic code for a jeep check engine light?

What is the diagnostic code for a jeep check engine light? Refer to our Generic OBD II code list for definitions on all other Jeep diagnostic trouble codes. Manufacturer Specific Codes P1105Open Or Shorted Condition Detected In The Baro Read Solenoid Control Circuit - Read Our Article on Automotive Circuit TestingFor Help With This Jeep Check Engine Light Code P1192Inlet Air Temp. Circuit Low Is there a code on my Jeep Wrangler? Try as we may to keep our Jeep vehicles running in perfect condition, odds are the vehicle will 'throw a code' and light up the Check Engine symbol...
Other

Do you need spark tester for cop coils?

Do you need spark tester for cop coils? This inexpensive spark tester is a MUST have tool to correctly diagnose the Coil-On-Plug ignition coils on your Chrysler vehicle with the info and tests in this article without this tool. Don't use a regular spark plug instead of a spark tester. Battery jump start cables. A digital multimeter or a test light. What does cop stand for in heat pump? For cooling, Q represents the heat that we take away from a cold reservoir. Air conditioner, for example, takes heat away from a room (cold reservoir). Note: COP for heating and...
Other

What to do if your tail light has come loose?

What to do if your tail light has come loose? Open the trunk and take a look. You can see where the wires should connect in order for the electrical system to properly work. If a wire has come loose, reattach it. On most new cars, the wiring harness is located behind panels in the trunk and is not accessible without removing the panels. Check the taillight bulbs. How many taillights do you need for stop and turn? If your Stop and Turn wires are separated, you will need to two taillights on each side: If the two wires are...
Easy tips

How long does AC condenser last?

How long does AC condenser last? Unlike furnaces, air conditioners are often outdoors and exposed to extreme temperatures throughout the year, which shortens their life expectancy. Modern air conditioners can last between 15-20 years, and older air conditioners last around 10-12 years. How do you replace an A / C condenser in a car? Remove the condenser mounting bolts. Remove the condenser. Install a new condenser making sure any rubber cushions fit properly on the condenser assembly. Pour a small amount of compressor oil into the line fittings. Reconnect the A/C lines. Replace all O-rings Re-install any parts that were...
Most popular

What does trouble code p0456 mean on Chrysler PT Cruiser?

What does trouble code p0456 mean on Chrysler PT Cruiser? While the trouble code may state that there is a “small leak” in the EVAP system of your Chrysler PT Cruiser, it is actually referring to the amount of pressure lost, and not the physical size of the leak. These leaks can be really small. Chrysler PT Cruiser P0456 Definition P0456 is a universal OBDII trouble code. What is the OBDII code for Chrysler PT Cruiser? Chrysler PT Cruiser P0456 Definition. P0456 is a universal OBDII trouble code. This means that regardless of which make or model of vehicle, the...
Other

What happens when the MAP sensor fails in a Chrysler?

What happens when the MAP sensor fails in a Chrysler? Your Chrysler's fuel system (and by extension, the ignition system), depend on the info that the MAP sensor feeds the fuel injection computer. So, when the MAP sensor fails, you'll have the check engine light (CEL) shining nice and bright on your instrument cluster and sever engine performance problems. Do you need the Chrysler 4 wire sensor test? To see if this tutorial applies to your specific vehicle take a look at the Applies To container on the column on the left. If you need the Chrysler 4 wire MAP...
Easy lifehacks

What are the specs of a 2002 Chrysler 300M?

What are the specs of a 2002 Chrysler 300M? The Special’s ride height is an inch lower than that on other 300M sedans. All 300M sedans get a new grille for 2002. Electronic brake-force distribution has been added to the antilock braking system, and a pressure-based tire monitor is included in the optional luxury group. When did the Chrysler 300 series come out? For the modern Chrysler 300 beginning in 2005, see Chrysler 300. For the letter series of 300 models from the 1950s and 1960s, see Chrysler 300 letter series. For the non-letter series from the 1960s and 1970s,...
Common questions

How to disarm a security system without remote?

How to disarm a security system without remote? Put key in the ignition, the turn the ignition on within 15 seconds, but do not start the car. The security light should go out. The system is disarmed. I got this from here: http://www.parksoffroad.com/tacomamods/alarminfo/alarminfo.htm Yes, I did see that as well, thanks for pointing that out. How does a remote arm and disarm work? A remote-controlled arm and disarm is a simple way to better connect you with your home security system. Using the latest and most convenient form of technology for you and family members, including: How Remote Home Security...