Common questions

Can you color match a bumper?

Can you color match a bumper? These metallic flakes lay differently on plastic than they do on metal. Once the bumper is attached to the vehicle the color match may look perfectly matched at one angle but different from different angles you see color variances. How much does it cost to color match a front bumper? Chain auto body shops like Maaco charge anywhere from ~$50-$100 for labor, so if materials cost around $50, plus 2 hours of labor, you will be paying a minimum of $150 for your bumper to be painted by a professional as compared to a...
Easy lifehacks

What does the S on a Ford key mean?

What does the S on a Ford key mean? Thanks. Its Encryption. S keys are Ford old PATS (passive aint-theft system) 40 bit encryption, the newer SA is an 80 bit encrytion that is backward compatible with old PATS using cars. Why does my car key have an S on it? A transponder key has a chip or rfid (radio frequency identification transmitter) tag in the head of the key. This chip has a code programmed into it that must be programmed into your vehicle in order for the vehicle to start. This is an additional security feature to just...
Common questions

How do you remove a clutch from a car?

How do you remove a clutch from a car? You will be able to remove the old clutch by either removing the pedal assembly or going underneath your dash and taking the clutch rod from the actual pedal. The latter is recommended. In order to do this, you will need to remove your steering column so it will be easier to move around. Do you need to install a hydraulic clutch? When installing a hydraulic clutch there are several things that you should keep in mind. These types of clutches can be difficult to install yourself if you are unfamiliar...
Other

How is the slip yoke on a Mustang determined?

How is the slip yoke on a Mustang determined? Because the yokes are determined by the transmission and the rear axle assembly this becomes primarily a function of matching the U-joint size and type. The slip yoke at the front of the driveshaft must match the splines of the transmission output shaft and also be of the correct length. Is it better to have a pinion yoke on the rear axle? If it means having a different slip yoke or pinion yoke on the rear axle, it’s preferable in terms of strength, reliability, and serviceability. U-joints don’t fail often if...
Other

Is there a fix for 95 GT rough idle?

Is there a fix for 95 GT rough idle? Discussion in ' 94-95 5.0 - Specific ' started by Rtfm, Apr 17, 2015 . I thought I would pass along my findings regarding the ubiquitous 94-95 5.0 rough idle/stumble/slight miss issues, as they have been described. I've researched several of the Mustang forums, but no one seems to have solved the issue entirely. How many miles does a 95 GT 5 have? Some history: I purchased my 95 GT 5 speed from a friend last year with 97,800 miles, all stock and well maintained. Can a poor fuel pressure regulator...
Easy tips

Is the 2009 5.4 Triton a good engine?

Is the 2009 5.4 Triton a good engine? 5.4L Triton Common Engine Problems Power comes in at 235-550 horsepower and 330-510 torque. Output greatly depends on the year and model. Nonetheless, the performance numbers are impressive for the era the 5.4L engine was released. It's a solid overall engine and won a handful of Ward's 10 Best Engine awards. Are there any issues with the Ford 5.4L engine? The 2-valve Ford 5.4L engine sometimes has issues with spark plugs actually blowing out of the head. 3-valve engines don’t have this issue. However, the spark plugs are known to sometimes break...
Easy tips

What to do if your Ford Ranger is stalling?

What to do if your Ford Ranger is stalling? You should be able to unplug the IAC (9F715) with the engine warm and have it remain running at around 550RPM and be able to control the idle otherwise. Make sure the air intake “zip tube” isn’t cracked causing an intermittent bypassing of the MAF sensor. I’ve seen that happen a time or two. What does off throttle air control do on a Ford Ranger? When you are off throttle air control is done with an idle air control (IAC) valve. This would be the first thing I’d look at. Do...
Other

Why is my Ford truck not hard steering?

Why is my Ford truck not hard steering? Our trucks are so heavy that if the pump is not running at 100% pressure it wont turn. The first one I got from ford if you reved it just alittle it would turn easy. So the pressure was almost there. Such a fine line between working and hard steering. Hydraulic ram and high output pump fixed my issues. Even with an 11' snowplow What should I replace my Ford 7.3L PowerStroke with? The KC Turbos 300508 7.3L TP & GTP38 Replacement Turbine Heat Shield is a direct-fit replacement for your 1994-2003...
Easy tips

What kind of engine does a 2 valve coil have?

What kind of engine does a 2 valve coil have? If there is a bend there, you have a 2 valve engine. Where the coil is straight, you have a 3 valve engine. If you would instead get an answer without getting down and dirty, there is an alternative to the above. You need to look up ‘OEM ford coils.’ Here, you can put down your make as well as the model and the year. How to test your coils on a 5.4 Ford Motor? How to test your coils on a 5.4 ford motor - YouTube Replacing This coil...
Common questions

How many miles does a Ford F250 diesel get?

How many miles does a Ford F250 diesel get? I purchased a used Ford F250 7.3L Diesel 8 months ago with 150K miles on it. I pulled my first big load with it this past weekend from Murrieta, CA to Mammoth Lakes, CA...a total of about 350 miles one way in very hot temperatures and up a mountain. Which is better a diesel or a V10? But upon replacing and at that time looking at all the issues with 6.0, decided V10. 2005 V10 F350 Crew Dually. 130,000 later and almost all hard towing 10K +, I can attest to...