Most popular

Which is the worst model of Ford F150?

Which is the worst model of Ford F150? Five of the worst F150 trucks built by Ford are based on the consumer ratings and complaints to the National Highway and Traffic Safety Administration (NHTSA). There are thousands of complaints about internal components and functional mechanics (like windows) failing on these models of F150. Why is the Ford F150 considered a lemon? It is one of those models that Ford wishes they hadn’t released. The failure of this truck is mostly due to the high number of engine failure complaints. When looking at this model, it is clear that it is...
Most popular

What to do if you have gasoline in your diesel engine?

What to do if you have gasoline in your diesel engine? If you think you have gasoline in your diesel tank, the first thing to do is to stop your car in a safe place and turn off the engine as soon as possible. If you are sitting at the gas station and have not started your engine before realizing that you have filled it with the wrong fuel, do not start the car! What to do if gas is put in Your Truck? Simply siphoning “most” of the gasoline out and topping off with fresh number 2 isn’t good...
Common questions

How do I turn off MyKey on Ford with one key?

How do I turn off MyKey on Ford with one key? How To Disable Ford MyKeyStart the car. Locate your steering wheel-mounted information display controls. On the main menu, select “Settings” by pressing “OK.”Under “Settings,” scroll to the option that says “MyKey,” then press “OK.”Under “MyKey,” search for the option that says “Clear MyKey.” How do you reset MyKey on a 2015 Mustang? Ford Mustang Owners Manual: Clearing all MyKeysAccess the main menu of your information display and press SETUP until PRESS RESET TO CLEAR MYKEY displays.Press and release the RESET button. Press and hold the RESET button for two...
Easy lifehacks

Why does my F-150 brake light keep going on and off?

Why does my F-150 brake light keep going on and off? If wiggling that harness causes the brake light to go on and off, you have the resistor issue. To perform this simple fix on your Ford F-150, you will really only need two tools; a soldering iron and a screwdriver. Why are my brake calipers not releasing properly? Water and other dust can come into the handbrake wires and cause them to rust. This will cause the brake calipers not to release properly when you release the handbrake. To fix this, you can try to lubricate the handbrake cable...
Easy tips

How many bolt holes are in a Ford 4.0L?

How many bolt holes are in a Ford 4.0L? There have been three blocks used for the 4.0L. Each one is unique in some way, so none of them can be interchanged. The first 4.0L block was a 90TM-AB casting. It had six bolt holes on the passenger side and 10 bolt holes on the driver’s side. When did the Ford pushrod engine become 4.0L? It was replaced by a SOHC engine from this same family at the end of model year 2000. These pushrod engines are all conventional 60° Vs with cast iron blocks and heads. The 2.6L block...
Easy lifehacks

What to do if your intake manifold is stuck?

What to do if your intake manifold is stuck? If this is the case, it will be controlled by an electronic intake manifold solenoid. If you suffer from a intake manifold runner control that is stuck open, there are a few symptoms you will probably notice. What are the symptoms of bad intake manifold runner control? One of the first symptoms of a faulty intake manifold runner control is difficulty starting the engine. The intake manifold runner control is usually positioned when the vehicle is started. Can a vacuum diaphram control an intake manifold? Finally, sometimes it is achieved by...
Common questions

Where is the fuel pump fuse on a 2003 Ford Mustang?

Where is the fuel pump fuse on a 2003 Ford Mustang? The fuel pump relay is in the CCRM Constant Control Relay Module, its behind the fender liner on the passenger side. Directly behid where the MAF is mounted. The fuse is inside the engine compartment. Can a bad fuel pump make a Mustang difficult to start? One of the best indicators of a clogged fuel pump is going to be that the your Mustang is difficult to start. This because there’s not enough fuel pressure to properly atomize the fuel as it enters the combustion chamber. What causes a...
Easy tips

How do I reset my 2012 Ford Focus BMS?

How do I reset my 2012 Ford Focus BMS? 1) Ignition on (engine off), headlight flashers 5 times, then brake pedal 3 times. Battery indicator lamp will flash meaning success. 3) Ignition on (engine off), lights on, fog light button 5 times, then hazard 3 times. Battery indicator lamp will flash meaning success. What kind of battery does a 2012 Ford Focus take? What's the best battery for a 2012 Ford Focus? The 2012 Ford Focus requires a Group Size 96R, lead acid, 12-volt with 600 Cold Cranking Amps, 740 Cranking Amps, and a 90-minute Reserve Capacity. There is no...
Most popular

What to do if your wrench light is on?

What to do if your wrench light is on? If you don't have a scanner and don't want to spend any coin to get one, you will need to visit your local Ford service center or another automotive shop such as Pep Boys or Autozone to run a diagnostic test. If a code comes up, then you can address the issue head-on. What does the wrench light on a Ford truck mean? The wrench light in the Ford F-Series trucks is very similar to a check engine light. When the wrench light comes on the vehicle may go automatically into...
Easy lifehacks

What is diagnostic code for F150 EcoBoost crankshaft?

What is diagnostic code for F150 EcoBoost crankshaft? Diagnostic code was P0016. Was looking at the long list of things that could cause the Cam and Crank timing to be off, and I started to panic. Sounded like a real expensive repair, changing chains, or cam phasers. What are the symptoms of engine code p0017? Code P0017 may be accompanied by several different symptoms. These including: an engine that runs poorly, an engine that cranks but will not start and an illuminated check engine light. How do you troubleshoot code P0017 ? Perform a visual inspection of the sensors and...