Easy tips

How much weight can I put in the back of my Chevy 2500HD?

How much weight can I put in the back of my Chevy 2500HD? Chevrolet Silverado 2500HD Specs: The 2020 Silverado 2500HD can tow as much as 18,500 pounds, sporting a max payload of over 3,700 pounds. How much weight can a Chevy Silverado haul? (Chevrolet has the full 2021 spec sheet up here, if you're curious.) The Silverado 2500 HD Custom Crew Cab, which can still tow 14,500 lbs with a hitch. Chevrolet added some trick towing tech to the 2500 HD and 3500 HD this year as well, making these overkill haul-buddies even more useful thanks to tech they've...
Easy tips

How do I disable theft mode?

How do I disable theft mode? Answers : If you press the + and - buttons on the front of the monitor at the same time for 10 seconds it disable's it. You can disable it completely by running the software disc and choosing disable Theft Lock. When to turn off the anti theft system? When you are inside the car. Apply this trick when you have access to the car’s interior and the ‘Theft System’ light on the dashboard is ON. Insert the key in the ignition slot and turn it to the right only slightly. Keep it in...
Other

What does ATC mean on fuse box?

What does ATC mean on fuse box? automatic transfer case the ATC fuse stands for automatic transfer case. What Colour is an ATC 20 amp fuse? Yellow Vendible ItemAmps20ApplicationAutomotiveColorYellowMaterialPlasticSeriesATC What is the difference between an ATC and ATM fuse? An ATM fuse is considered to be a mini fuse and it came out in the early 1990s. The only difference is it is smaller than an ATC fuse in actual size. It generally cannot be used in a fuse block that is made for an ATC fuse, as it will not fit in properly. Does fuse color matter? As long...
Other

What trk-01 bass?

What trk-01 bass? In a nutshell, TRK-01 comprises dedicated Bass and Kick engines, in which various synthesis methods - and/or samples for the Kick engine - are used to generate the two sounds in question, embellished with modulation and effects. What trk-01? TRK-01 offers a range of tailored processing types and sound-shaping techniques, starting with a user-selectable insert effect for both Kick and Bass modules. Delay and Reverb sends provide key controls in a simple interface, with additional features for huge creative potential. What is Reaktor Player? Reaktor Player is a free limited version of the software that allows musicians...
Most popular

When did they start using power steering in cars?

When did they start using power steering in cars? By the start of the 1960s, power steering was an option or standard on all American-built vehicles. In the late 1960s and into the early 1970s, the big steering wheel still graced steering columns. The large diameter of the steering wheel made the power steering very sensitive to input at higher speeds. What was the problem with my Chevy Venture? We finaly solved the problem for my Chevy Venture engine racing. We removed the throttle body to make sure that the gasket was not leaking and to make sure the idle...
Easy tips

What kind of fuel does a Chevrolet Caprice use?

What kind of fuel does a Chevrolet Caprice use? It has been rumored that GM elected to use the L77 (over the LS3 / L99) in the Chevrolet Caprice PPV (Police Package Vehicle) due to its Active Fuel Management (cylinder deactivation) technology as well as its ability to run on E85 ethanol fuel. What kind of engine was in a 1986 Chevy 305? 1986 Chevy 305 Specs. The Chevy 305 engine refers to the 305 cubic inch V-8 displacement engine, which was developed for use in autos produced between 1976 and 1992. How big is a 6.0 liter small block...
Easy tips

Is there a problem with delete on Duramax Diesel?

Is there a problem with delete on Duramax Diesel? The only problem with the delete is that you may get a lot less at trade in time or a dealer may not even want to touch it. sieg and WARRIORPRINCEJJ like this. Which is the best Duramax DPF delete kit? Excludes Newer 2015.5 Versions With 3-Bolt Flange On OEM Turbo Down-Pipe. Will Fit Extended & Crew Taxicab, Short Bed or Long Bed. Mandrel Bent Tubing For Maximum Circulation. Straight Pipeline Layout, No Muffler Or Tip Included. Aluminized Steel. Premium & Affordable Products. Expert Installation Advised. Various other Deletes:. LML EGR...
Easy lifehacks

How much does it cost to change transmission to manual?

How much does it cost to change transmission to manual? The cost to do this type of swap can vary greatly as well, however, you can expect to pay anywhere from $1,000 to $3,000 for parts and labor to get the job done. Can a 5 speed transmission be remanufactured? Jeep Wrangler 87-02 YJ TJ 2.5L 4CYL. AX5 5-Speed Remanufactured Transmission One of the greatest benefits of manual transmissions is that they last longer than automatic transmissions do, but if you have really put some miles on your vehicle over the years, the time may come when that standard transmission...
Most popular

When did the Flex Fuel Sensor go bad?

When did the Flex Fuel Sensor go bad? I just replaced the flex fuel sensor on my 2004 Yukon with the 5.3L flex engine approximately 45 days ago. Today I got a check engine light for the fuel composition sensor again (P0178) and had the same symptoms the last time it went bad. Can a bad MAP sensor cause engine failure? MAP sensor on footwell inside engine compartment. A bad manifold absolute pressure (MAP) sensor can upset fuel delivery and ignition timing. Depending on your vehicle model, your engine might experience one or more of these performance problems: However, these...
Easy lifehacks

How do you install a pushrod on a block?

How do you install a pushrod on a block? You take the cover plate off, install the pushrod and you will find it falls right back out. In the front of the block there is a bolt blocking a hole. Remove this bolt, install a longer one that will bump up against the push rod and hold it in place. After installing the pump remove this bolt and put the short one back in. Can a pushrod be installed on a fuel pump? The answer to your question is yes. try installing the pump in the position the crank is...