Easy tips

How does AWD work on a Chrysler 300C?

How does AWD work on a Chrysler 300C? There's two parts that need to engage for the front to get power. There's a front axle disconnect, and a clutch in the transfer case. When it's in AWD mode as you'll see one the dash the front axle is connected so it's ready to apply power. What kind of platform does the Chrysler 300 have? The Chrysler 300 is based on the rear-wheel drive Chrysler LX platform with components derived from the Chrysler LH architecture. Where is the Chrysler 300C right hand drive made? All 300C Touring models, along with European...
Other

What transmission is in a 1991 Dodge Dakota?

What transmission is in a 1991 Dodge Dakota? Also debuting on 1991 models were six-bolt wheels (replacing the earlier five-bolt wheels)....First generation (1987–1996)First generationTransmission3-speed automatic 4-speed automatic 5-speed manualDimensionsWheelbase111.9 in (2,842 mm) 123.9 in (3,147 mm) 130.9 in (3,325 mm) (ext. cab) Will a Dodge v6 transmission fit a V8? v8 swap is very easy, the stock v6 tranny will work but it won't hold up as well as the v8 tranny, and get the v8 computer and wire in the extra 2 injectors into the wiring harness and your set. What are the specs of a 1992 Dodge Dakota?...
Easy tips

What does a p0700 TCM fault code mean?

What does a p0700 TCM fault code mean? More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely). Where is the trouble code for limp mode? Because of this, every time when the limp mode is active, there will be a stored trouble code in the trouble code memory. Therefore, the best solution to fix the limp...
Most popular

Will bad EGR cause no start?

Will bad EGR cause no start? The exhaust gas recirculation (EGR) valve introduces a measured amount of exhaust gases; into the intake manifold to get re-burned. This helps lower engine temperature and harmful emissions. But, the valve can fail and stick either open or closed. When the valve sticks open it may prevent your engine from starting. What was the second generation Hemi engine called? Second Generation: 426. The 426 Hemi was nicknamed the "elephant engine" at the time, a reference to its high power, heavy weight and large physical dimensions. Its 10.72 in (272.3 mm) deck height and 4.80...
Easy tips

Why are my brake rotors warped?

Why are my brake rotors warped? Brake rotor warping isn't as severe as it sounds. Warping actually just refers to an uneven surface, mainly caused by heat. The brake rotors can become glazed with material from the brake pads. This happens when the brake pads get very hot which causes the pad material to rub off onto the brake rotors. What's the real truth about Warped brake rotors? The REAL truth about warped brake rotors... The typical situation: New pads are fitted to a new pair of brake discs. A week later there’s a vibration or “judder” when the brakes...
Common questions

What are the parts of an AC compressor?

What are the parts of an AC compressor? Understanding the Main Components of Your Air ConditionerCompressor. Located in the outdoor portion of your unit, the compressor is basically the motor to your air conditioning unit. Condenser. Expansion valve. Evaporator coil. Fan. Does AC compressor need to be covered? Whether you should cover your AC unit during the wintertime has been a debate within the air-conditioning industry for years. Many AC experts believe covering your air conditioner is unnecessary, as the units have been built to withstand extreme weather such as rain, wind, snow and ice. What warranty covers AC compressor?...
Other

How to get the settings of the instrument panel?

How to get the settings of the instrument panel? First consult the online help, link above or click on ? icon inside the GUI. InstrumentPanel stores some of the settings in the browser's localstorage. In case there is some garbage there you can get it cleared by using a url with query parameter ?reset=true. What should I do if my gauges are not working? The first step in diagnosing this type of issue is to identify the fuse associated with the instrument cluster or gauges. The fuse should have power on both sides when the ignition key is turned to...
Common questions

What happens if your wheel comes off while driving?

What happens if your wheel comes off while driving? When a tire falls off, it can cause the driver to lose control and the vehicle may even roll over. Loose wheels often fly into the air and bounce into other vehicles at speed. This can cause significant damage and injuries. What can cause a tire to fall off while driving? In addition to loose or broken lug nuts, there are other ways a tire could fall off while you are driving. When an axle breaks, it can fly off and take the entire wheel and tire assembly with it. If...
Most popular

Is a Chrysler 300M front wheel drive?

Is a Chrysler 300M front wheel drive? The Chrysler 300M is a full-size luxury sedan that was produced by Daimler/Chrysler from 1999 to 2004. It is a front-wheel drive, 255 hp (190 kW; 259 PS) V6 engined car using the Chrysler LH platform. When did the Chrysler 300M Pro Am Come Out? A limited number of 300M "Pro-Am" models were marketed during 2002. These versions included an Infinity audio system with subwoofers as well as two-toned leather interiors. The Pro-Am also came with a set of limited edition golf clubs and a holder for a golf bag in the trunk....
Easy lifehacks

What is accessory drive belt?

What is accessory drive belt? Accessory drive belts are used to drive all the accessories that run off the front of the engine. The drive belt is responsible for using the engine's revolutions to drive the power steering pump, a/c compressor, alternator, water pump, and other belt driven accessories. How do you take a drive belt out of a car? While holding the tensioner back with one hand, use your other hand to slip the belt off of one of the accessory pulleys (choose the pulley that’s easiest to reach). Feed the belt out and away from the remaining pulleys,...