Most popular

How to install main bearings without removing the engine?

How to install main bearings without removing the engine? Then coat the journal surface with engine oil before installing the bearing. Install the new bearing half by making use of the tool again and by turning the crankshaft in the opposite direction from that which it was turned to remove it. It should slip in with reasonable ease. Can a crankshaft bearing be removed to recondition? If the journal is worn beyond specifications, the crankshaft will have to be removed to recondition it, which would then require new undersized main bearings. Examine the surfaces of both the journal and the...
Common questions

How to remove a steering wheel from a car?

How to remove a steering wheel from a car? When wanting to remove a steering wheel from any car they will be roughly the same and this should hopefully give you a head start on making you car ride the car you want it to be. http://www.accessoriesonline.com.au/s... http://www.supercheapauto.com.au/onli... Have fun guys and be safe when attempting any car modifications or repairs. What to do if your golf cart steering wheel is not working? High Value, Affordable Flashight! If playback doesn't begin shortly, try restarting your device. Videos you watch may be added to the TV's watch history and influence TV...
Most popular

What causes high oil pressure gauge?

What causes high oil pressure gauge? Clogged oil channels, a bad oil pump, the wrong kind of oil, a dirty oil filter, or a bad pressure relief valve can all cause high oil pressure. Unfortunately, your oil gauge, oil leaks, and increased crankcase pressure are the only real signs of high oil pressure. Why does my oil gauge keep going bad? If installing a thicker viscosity oil raises the oil pressure, then something major is wrong inside the engine. Besides, modern cars are designed to use very thin oil anyway. Gauge Problem vs Oil Pressure Problem Dashboard gauges do occasionally...
Most popular

Is the passenger side blade still attached to the mower?

Is the passenger side blade still attached to the mower? The mower deck is still attached to the mower. Working on the “passenger side” blade I am attempting to loosen the nut by pulling from front to back. Is this correct. Looking at the blade from the bottom up (as if the mower were upside-down) determine which way it turns when cutting by noticing the pitch (angle) of the blades. What does it mean when your shoulder blades stick out? Before talking about symptoms, it helps to describe exactly what location we are talking about when describing the shoulder blades....
Common questions

What happens when a valve is stuck in a Allison 1000?

What happens when a valve is stuck in a Allison 1000? The trans does not have sensors on the valves in the valvebody- so when the TCM sends a signal for the solenoids to operate-- and the expected shift does not work, it can set a solenoid code- when in fact it may be a stuck valve in the VB. Why does my Allison 5 speed have no reverse? Try taking video with a camera/camera phone and show the video to the dealer to avoid the can not duplicate problem issue. Friday a 2002 d/a shows up at the shop...
Other

Why do I get static on my AM radio?

Why do I get static on my AM radio? Many other sources produce radio waves, including the sun, lightning, and power lines. If the frequency of these other waves overlap with the intended channel, the AM receiver can pick them up as changes in amplitude, resulting in noise or static. How do I make my FM radio not static? How to Get Rid of Static on an In-Home RadioTry an antenna. For FM radio, antennas range from the dipole and rabbit-ear types for less than $10 to roof-mounted antennas for more than $150. Relocate your radio. Turn off electronics near...
Easy lifehacks

When does your car run hot or cold?

When does your car run hot or cold? If you are like most drivers, our guess would be almost never.  Most drivers look at their temperature gauge so rarely that many vehicle manufacturers don’t even include temperature gauges any more but just lights that will come on if your car is either extremely cold or extremely hot. Why does my car overheat when I Turn on the heat? By a large margin, the most common cause for engine overheating is simply a low coolant level. Your engine's cooling system relies on coolant to circulate and remove heat from the engine....
Easy lifehacks

How does a low speed windshield wiper work?

How does a low speed windshield wiper work? If the wiper switch is moved to the MIST position and held, the windshield wiper motor will operate in the LOW mode until the switch is released. Windshield wiper DELAY operation is a low speed wiper motor function with a variable delay interval between the wiper motor cycles. What happens when you turn off the wiper motor? When the windshield wiper/washer switch is turned to the OFF position while the wiper motor is somewhere in mid-cycle, the wiper motor module will continue to operate the wiper motor until the wipers reach the...
Most popular

Can a blown fuse cause a car battery to die?

Can a blown fuse cause a car battery to die? a fuse blows to keep current from going through the circuit. in other words, there's no way a blown fuse can drain the battery. take the battery in to get checked, it might just be a bad battery. Are there any recalls on 2003 Chevy Tahoes? We have learned that your 2003 model year Chevrolet Silverado, Tahoe, and Suburban; 2003 model year GMC Sierra, Yukon, and Yukon XL; and 2003 model year Cadillac Escalade, Escalade EXT, and Escalade ESV vehicle may have the potential of exhibiting a battery drain condition....
Other

Are there transmission problems on my 1997 Chevy Silverado?

Are there transmission problems on my 1997 Chevy Silverado? The most recently reported issues are listed below. Consumer was complaining about a transmission problem. Transmission changed roughly when exiting off a ramp. Driver had to turn vehicle off and wait 5-10 seconds, then restart to reset the computer. I currently own a 1997 Silverado ext cab fleet side. Why is the transmission slipping on my Chevy Silverado? The sunshell is damaged. The transmission needs to be replaced or repaired. The 2-4 band is slipping, or servo seals are leaking. Servo seals can be replaced without pulling transmission, or the transmission...