Common questions

What kind of oil does a case 580K brake take?

What kind of oil does a case 580K brake take? If you use brake fluid, you will swell/ruin the seals in the slave cylinders. The 580k transaxle (diff/gearbox) takes Case Transaxle oil, if there is diff oil (80/90 or similar) the brakes will not work correctly. If you have the correct transaxle oil and correct fluid in the master cylinder, check the actuator adjustment. From memory, to adjust: What causes a backhoe to have a clutch problem? A: Both problems are usually caused by the failure of the forward clutch pack. If the drive is poor in forward it could...
Other

What is the LED screen on the JCB 540-140 LOADALL?

What is the LED screen on the JCB 540-140 LOADALL? An LED screen on the JCB 540-140 HiViz Loadall’s dash provides useful information for efficient running, like fuel remaining, fuel used since last fill, current average fuel consumption, DEF level and any current warnings. Which is the safest JCB LOADALL to buy? Combine this with a wealth of safety features and you've got one of the safest machines on the market. Additionally, the latest and cleanest JCB 540-140 Hi-Viz Loadall is equipped with an ultra clean and efficient JCB Dieselmax Stage V engine. Is the JCB 540-140 hi viz Machine...
Easy tips

Where can I buy used John Deere dozers?

Where can I buy used John Deere dozers? We have salvaged thousands of John Deere dozers and have many used parts that are not listed on brokentractor.com. Call our salesman at (800) 909-7060 for used John Deere parts questions and quotes. Many of our new John Deere parts are made here in the United States and are ready for immediate shipment. Where do you get John Deere bulldozer parts? We now also off Deere 450H, 450J, 550H, 550J, 650H, 650J parts as well. Our new sheet metal engine side shields are manufactured in Ohio and are available for almost every...
Most popular

How do you bleed an engine?

How do you bleed an engine? MANUAL PROCEDUREPump the fuel into the lines.Do this until you just see fuel bubbling out of the bleed nipples of: The secondary filter (diesel filter-usually located on top of the filter housing) The fuel injection pump (located on the side of the engine – follow the fuel pipes down from the injectors) How do you Bleed the high pressure fuel system? Next comes the injection pump. Most are equipped with bleed screws, and thus the procedure is the same. Then you must bleed the high-pressure fuel system, which is done by loosening the union...
Easy tips

Why do you break teeth on stump grinder?

Why do you break teeth on stump grinder? It allows you to start your cut farther into the stump. Only one set of teeth are engaged at once. The break before the next set of teeth pass through the stump gives your motor a chance to regain RPM before starting another cut. Can a walk behind Edger be used as a stump grinder? However, if you just want to get the stump out of your sight and don't need to take all of it out, you can turn a walk-behind gas edger into a homemade stump grinder. Make sure there...
Most popular

When to look for a car cooling system problem?

When to look for a car cooling system problem? Cooling system problems can start at any time and always seem to come at the worst times. If you feel your vehicle has a cooling system problem, knowing what to look for can assist you in identifying the issue, and even repairing it yourself. The cooling system in your vehicle is designed to keep the engine at a consistent temperature. Why does the coolant in my car keep going down? If it has gone down, the coolant is either leaking or being burned.. Lack of adequate amount of coolant is solely...
Easy tips

How can I tell if my Regen process is not working?

How can I tell if my Regen process is not working? If I stop the vehicle the regen will restart when exhaust temps come up and it will stop at about 2-4 grams of soot. Regen temps are also measured as a way of telling if the injector is working. If it calls for a regen and the temps don't come up I think a message will be displayed or a code thrown. When does Regen start on a DPF filter? Wonder what codes you have now. Regen is initiated based on DPF filter diff. pressure. On mine starts at...
Other

What kind of engine does a Ditch Witch trencher have?

What kind of engine does a Ditch Witch trencher have? The new RT105 was engineered with you in mind. The only trencher in its class with a mechanically powered trencher, the RT105 also features a 107-hp Deutz ® diesel engine and improved operator’s station to maximize your comfort and jobsite effectiveness. How much horsepower does a Honda trencher have? The C12 offers a 12-hp (8.9-kW) Honda ® and up to 24” (609.6 mm) digging depth for efficient installation of pipe and cable. The unbeatable reliability and proven performance will keep your customers coming back time and time, again. What kind...
Easy tips

Which is oil should you use for your Mustang skid steer?

Which is oil should you use for your Mustang skid steer? Oil for Mustang Skid steer loaders 940. Which oil is the best? Professional lubrication advice - Kroon-Oil Which oil should you use for your Mustang Skid steer loaders 940? Complete advice for all components, such as the engine, gearbox (transaxle), brake system, power steering system and cooling system. Where can I get a Mustang skid steer loader? MUSTANG SKID STEER LOADER PARTS MANUAL mUSTAnG 940 MUSTANG SKID STEER LOADER PARTS MANUAL Prior to serial #5476803 PART #000-34884 Revised January 1994 Revised September 2008 mus Mustang Manufacturing Company, Inc. A...
Other

Where does the hydraulic fluid leak on a J D tractor?

Where does the hydraulic fluid leak on a J D tractor? 1520 J D leaks hydraulic fluid from both ends of the load control shaft. There is an o-ring with a flat seal that goes inside it.The shaft I'm referring to is where the 3 point hitch lift arms pivot at the rear end of the arms. J D stupidly ran this shaft thru the hydraulic/rear end housing. What kind of oil to use on John Deere load control shaft? I would only use John Deere Hy-Guard oil. Its a good bet the trans/hyd oil has not been changed in...