Other

How do you know when your air con needs regassing?

How do you know when your air con needs regassing? How do you know when your air-con needs regassing? The first sign that your air-con needs regassing is that the air being blown from the vents is not as cool as it used to be, or it doesn’t feel any different when the AC is switched off. If you can’t remember the last time the system was regassed, it’s probably worth doing. What can go wrong with an air con system? Heaps can go wrong with air cons. Older cars run on a different type of gas to current cars,...
Easy tips

Where are front disc brake caliper brackets located?

Where are front disc brake caliper brackets located? Floor pedals and stock floor mounted dual chamber master cylinder with 1” bore. Caliper mounting brackets from the wrecking yard - '81 Chevy 1/2 ton 4WD (K10). Front axle nut socket. Is there a Master nut socket for front disc brake? Front axle nut socket. Master cylinder bleeding kit (if you pull your MC to ease the removal of the brass seat and 10lb check valve). You may have to get your hub machined to accept the rotor - See Post #8 (I didn't have to, but others have). How big are...
Most popular

How many Focus RS Mk3 were made UK?

How many Focus RS Mk3 were made UK? British Ford fans loved it. Of the 11,000 made, 4,000 were sold here. Are MK3 Focus RS going up in value? It won't increase in value, unless you never drive the thing and hold on to it for 30 years. It will hold it's value better than most other dime-a-dozen vehicles on the road, on average. Where can I find parts for my Ford Focus? MicroCat is a great help, ford should make it available as they would sell much more, This software is what your dealer uses but your dealer will...
Easy tips

What is power loss in a Ford Focus?

What is power loss in a Ford Focus? Power loss is similar to someone lightly dabbing the brake, hardly detectable to a passenger but detectable and annoying to the driver. Loss is not quite enought to visibly move the rev counter down. Is the Ford Focus 1.8 petrol Speedo? Incidentally, the car has always been prone to the well-known and infamous Focus power surge on upward gear changes and 2000 rpm 'idling' in slow moving traffic. It's due for a service soon so I'd appreciate any advice that I could fire off at the service department. Thanks in anticipation. I...
Easy tips

What does the inner tie rod connect to?

What does the inner tie rod connect to? The inner and outer tie rods connect to the steering arm in order to move the wheels of your vehicle. In the common rack-and-pinion steering system, the inner tie rods connect to the steering rack while the outer tie rods connect to the steering arms. What is the inner tie rod socket connected to in a rack-and-pinion steering system? Tie rods on a rack and pinion steering system The inner tie rod end connects to the rack and pinion steering gear and allows only up and down and some slight side to...
Common questions

Can you put a V6 engine in any car?

Can you put a V6 engine in any car? Yes, for a bigger power gain you will need to upgrade engine internals. But compare that to i4 -> v6 swap where you need a different motor mounts, suspension, all pipes and harnesses etc. Even if you do everything properly, i4 car wasn't designed for bigger weight of v6 engine too, so it might affect handling etc. What engine does the Ford Ranger use? All Rangers are powered by a turbocharged 2.3-liter four-cylinder engine and offer a 10-speed automatic transmission; both rear- and four-wheel drive models are available. Can a V6...
Easy lifehacks

What did Ford replace the Ranger with?

What did Ford replace the Ranger with? From 1993-1995, the Ranger sold more than 300,000 units per year. Starting in 1994, a surprising turn happened. The Ford Courier had been produced by Mazda, rebranded, and sold through Ford, but was replaced by the Ford produced Ford Ranger. What size double din fits a Ford Ranger? 4" tall A wide variety of standard-DIN (2" tall) or double-DIN (4" tall) receivers will fit, but if you go with a DD, you'll have to make some permanent modifications to the dash cavity. Are there any parts that can interchange with a Ford Ranger?...
Easy lifehacks

What does the error code p0430 mean on a catalyst?

What does the error code p0430 mean on a catalyst? Error Code P0430: Catalyst System Efficiency Below Threshold (Bank 2) The Error code P0430 is a DTC or a diagnostic trouble code. It is a check engine light code which indicates that the catalyst’s system efficiency is less than the required threshold. What does the p0430 code in Bank 2 mean? This is what produces the signal output indicating the catalyst’s storage capacity. Basically, the P0430 code is a trouble code used to indicate that the sensor in the catalytic converter located in bank 2 has detected that the converter...
Common questions

When did the new Lincoln Continental come out?

When did the new Lincoln Continental come out? In 1961, the Continental was completely redesigned. The design was originally intended to be the new 1961 Ford Thunderbird, but it was enlarged for Lincoln by the command of Robert McNamara to give Lincoln a distinctive, signature style. The new Continental's most recognized trademark, though, was a purely practical decision. When was the Lincoln Continental Mark 2 discontinued? After 1957, the Mark II was discontinued; the Continental Division was re-branded as a competitor to Imperial and Cadillac (rather than Rolls-Royce and Bentley). Media related to Lincoln Continental (second generation) at Wikimedia Commons...
Easy tips

How much does it cost to replace oxygen sensor?

How much does it cost to replace oxygen sensor? At 25,000 miles the brakes started to squeal in one of the vehicles and we replaced the rear brakes. Shortly after, the same problem presented itself in the second CR-V. Now at about 100,000 miles the check engine light started coming on, and we needed to replace the oxygen sensor at a cost of about $450. Where are the oxygen sensors located on a car? As a note, oxygen sensors used to determine engine fuel ratios are always located in front of the catalytic converter. The sensors behind the cats are...