Easy tips

Where are the flywheels on a ram clutch?

Where are the flywheels on a ram clutch? After machining, the flywheels are blanchard ground parallel to the crankshaft mounting surface ensuring minimum runout and the optimum mating surface for the clutch disc. Use steel flywheels in heavier drag race cars or for the best driveability in street driven vehicles. When to replace the clutch in a Dodge 3500? We had the opportunity to replace the clutch in a 2006 Dodge 3500 equipped with a Cummins and the G56 six-speed transmission. This "old" truck has seen some use, with around 365,000 miles on it. It was used for hauling RV's...
Easy lifehacks

Can you tune a 5.9 Cummins?

Can you tune a 5.9 Cummins? Tuning. There are many options for all 5.9L common-rail Cummins engines. The most popular offerings are (by year): HP Tuners, MM3, and Smarty (2003 to 2005), EFILive (2006 to 2009), MM3, EFILive, and EZLynk (2010 to present). How much horsepower does a 1998 Dodge Ram have? Other 2nd Gen Cummins specs were changed as well, that helped Dodge trucks stay slightly above their competitors. 1998 Dodge Ram trucks with the 24 valve 5.9L Dodge Cummins engine produce 235 horsepower and 460 lb-ft of torque when paired with the 5-Speed Manual transmission. How much does...
Other

What are the gears on a Dodge 1500?

What are the gears on a Dodge 1500? Your Ram 1500 Year? Choosing the right Dodge Ram gears can be the difference between top-notch performance and less than desirable truck response. This is why many Ram owners buy the gears found here. Why do you need differential carrier for Dodge Ram 1500? Your Ram 1500 Year? The search for the perfect Dodge Ram differential carriers ends here. These differential carriers help shift torque to the wheel that has the most traction to create a safer ride on any surface. The balanced torque provides a smoother ride with the weight distributed...
Common questions

What Gen is a 2010 Dodge Ram 2500?

What Gen is a 2010 Dodge Ram 2500? 4th generation 2010-2018 Ram 2500 & Ram 3500 Specs & Info 2010 marked the beginning of the 4th generation Cummins which continued until 2018. This generation Ram HD featured a myriad of new features and technology. Quad cab trucks were replaced with full-size crew cabs. When did the 6.7 Cummins come out? The 2010-2012 RAM 2500 and 3500 came with the standard output 6.7L, which delivered 350 HP and 650 lb-ft of torque. In mid-2011, however, these six-speed automatic transmission models could be equipped with an upgraded Cummins and a higher torque...
Other

Why is the oil leaking from my Dodge Grand Caravan?

Why is the oil leaking from my Dodge Grand Caravan? February 2021 at approximately 93,000 miles extensive oil leaking damage. Car is leaking oil from the oil filter housing unit including the gaskets around. At this point, the correct part is on back order from Chrysler, per the dealer where purchased the car, I am number 28,000 plus in the line to receive this part. Are there any problems with the Dodge Grand Caravan? Dodge Grand Caravan owners have reported 27 problems related to engine oil leaking (under the engine and engine cooling category). The most recently reported issues are...
Easy tips

Can a mechanic tell if a transmission is going bad?

Can a mechanic tell if a transmission is going bad? More common in a car with automatic transmission, a grinding or shaking that occurs when the gears change is often a sure indication that your transmission has a problem. Humming, whining, or clunking noises—none are good sounds to hear in your car. Let a local mechanic take a look. Can you drive with a damaged transmission? Driving on a bad transmission is never a good idea and you should not do it. Technically the vehicle can still be driven, but every time you do drive it you are risking your...
Most popular

When did I buy a 2000 Dodge Dakota?

When did I buy a 2000 Dodge Dakota? I bought the 00 Dakota Quad cab with its 5.9L V8 in November of 2000, brandnew with 140 miles on the ODO. I've since put 60000m on the truck without any major issues. Heated sideview mirrors were replaced under warranty. Right side passanger widow regulator died and had to be replaced. What's the problem with my 2003 Dodge Dakota? 14 people found this helpful. 2003 dodge Dakota, I had the same problem. It was my idler not being controlled properly. Quick free fix. Unhook your battery for a about 10-20 seconds, let...
Easy lifehacks

What happens when a car battery is dead?

What happens when a car battery is dead? If your battery is completely dead and does not even have power to light the light bulbs, then your flashers will not work. But if your battery is weak and is not powerful enough to start your engine, itcan still work the hazards flashing lights. Can a dying battery cause a check engine light to come on? A dying, fading car battery means low voltage. As a result, your car’s computer, which is responsible for reporting error codes, is also receiving low voltage. An error code will be generated which will in...
Most popular

What temp should transmission fluid run at?

What temp should transmission fluid run at? between 175 and 225 degrees According to TCI, the ideal operating temperature for automatic transmission fluid is between 175 and 225 degrees. At approximately 240 degrees, important additives in automatic transmission fluid (ATF) begin to cook. The result is the formation of varnish inside the transmission. Can you use oil temp gauge for transmission temp? Yes, you can use it. Trans temp Gauges come with several Max degree ranges, up to 250*-400*. You could also use a Tee fitting in the Cooler return line for Temp reading. At what temp does a transmission...
Easy lifehacks

Why do wheel seals need to be replaced?

Why do wheel seals need to be replaced? Average rating from 10 customers who received a Wheel Seal Replacement. Wheel seals are designed to keep dirt and any other types of debris away from the bearings so that the bearings can stay well lubricated and be able to do their job as they were intended to. What's the best way to remove a wheel seal? You can also use a set of large pliers and wiggle it off that way. Next, remove the cotter pin locking tab and the nut. That will allow the rotor/hub to slide off the spindle...