Common questions

Where was the first Glassic Replicar Ford made?

Where was the first Glassic Replicar Ford made? GlassicAnnex.org Asupport and knowledge sharing place for information about Glassic / Replicars Model A Ford replicas manufactured in Florida from 1966 to 1981. Can you give out Glassic replicars at car shows? Above: Cards that can be used by owners to give out at car shows. Available from GlassicAnnex by GLASSIC cars when they re-opened after a bankrupt proceeding in the mid-1970s. A support website for information about Glassic / Replicars Model A Ford replicas made in the 1960's and 1970's What kind of radiator did a 1930 Ford have? 1930 1931...
Most popular

What was the Ford F-150 Lariat in 1989?

What was the Ford F-150 Lariat in 1989? In 1989, automatic locking hubs for the F-150 were added. The four-wheel drive models featured a solid front axle that was hinged in the middle and connected to the actual frame, offering both coil and leaf springs. In addition, the 5.0L truck had an optional "Touch Drive" application for electronic transfers. What kind of brakes did the 1989 F-150 have? The eighth generation of Ford trucks was the first to boast standard rear anti-lock brakes with a five-speed manual transmission. In 1989, automatic locking hubs for the F-150 were added. What kind...
Easy lifehacks

Why does my 7.3 engine make one click noise?

Why does my 7.3 engine make one click noise? 99 7.3 wont turn over. It just does makes a single click noise and wont start. I replaced batteries, Positive terminal (the one that connects batteries together and then to starter and starter soleniod). I also cleaned all the grounds and terminals. Are there any problems with the Ford 7.3 Powerstroke? But despite being called the “best Powerstroke Ford ever built” and over 15 years since the last 7.3 left the production line, 7.3 Powerstroke problems are not as uncommon as you’ve been led to believe. But the good news is,...
Easy tips

Can a broken thermostat cause a coolant leak?

Can a broken thermostat cause a coolant leak? A broken thermostat housing is more likely to cause a coolant leak in your vehicle, resulting from cracked housing, warped housing, failed seals, or damaged seals that can leak fluid into the engine and cause heat dissipation. The thermostat housing usually consists of metal or plastic material in your vehicle. When do you need to replace the thermostat housing? The thermostat housing will need replacing if your vehicle outlasts the thermostat, and the part is not functioning correctly. If the hose cracks, the seals are damaged, or the housing cracks due to...
Common questions

What kind of smoke comes out of exhaust?

What kind of smoke comes out of exhaust? 2008 Ford F350 Diesel 6.4L blue smoke coming out the exhaust once in a while. Not all the time. Losing coolant. EGR VALVE/COOLER AND #2 FUEL INJECTOR WENT OUT THIS WEEKEND WITH MY HORSE TRAILER INCLUDING HORSES ON BOARD IN 100 DEGREE WEATHER. Is there a recall on the Ford F-350? THEIR SHOULD BE A RECALL BY FORD THIS IS A KNOWN PROBLEM AND UNSAFE WHEN TOWING LIFE ANIMALS!!! WASN'T THIS TRUCK BUILD FOR TOWING??? WHITE SMOKE WAS EVERYWHERE MY LIVINGQUARTER TRAILER STILL SMELLS FROM ALL THAT SMOKE.... white smoke occasionally. Why...
Easy lifehacks

What type of transmission fluid does a Ford AOD take?

What type of transmission fluid does a Ford AOD take? Mercon V fluid You may find you'll need different transmission fluid. Earlier Fords used type FA fluid, but the AOD requires 12 quarts of Mercon V fluid to fill the transmission and torque converter. How does a AOD transmission work? The AOD is a true hydromechanical 4-speed automatic transmission controlled by a manual shifter and throttle valve (TV) cable. They also have a throttle-controlled kickdown linkage, which works with the vacuum modulator to control shift-points mostly for wide-open throttle (WOT) downshift. What vehicles came with the AOD transmission? 4R70W used...
Other

Where does the fuel come from in a Ford PowerStroke?

Where does the fuel come from in a Ford PowerStroke? Meaning it comes from the tank through the pump, to the filter, to the injectors, to the return, back to the tank. Thinking of this now. I am thinking that leaving the toggle switch to the fuel pump bled the fuel system while it sat there. So with this I know it bled the fuel system. Are there any problems with a 7.3 liter diesel engine? The legendary 7.3 Power Stroke Diesel engine, when properly maintained can provide years of trouble free service. However there are several common problems that...
Other

What to do if your Ford engine is overheating?

What to do if your Ford engine is overheating? With the cap off, you can stick your fingers into the coolant as it is warming up. If the coolant isn't warming up, then the problem may be with your thermostat, which will need to be checked and potentially replaced. Check to make sure that the coolant is flowing properly. Why is my Check Engine light still on after filling up? The cap is a crucial part of a car’s fuel delivery system. It notably prevents gasoline fumes from leaving the fuel tank, and it helps keep the whole system under...
Common questions

How do you remove a lock cylinder from a door?

How do you remove a lock cylinder from a door? Use a screwdriver to twist the retaining screw to the left, loosen it, and remove it from the faceplate. This screw is what holds the lock in place. The lock cylinder is the portion of the lock within the door. It is the encasing into which the key is inserted through the keyhole. How to replace ignition key lock cylinder in a Buick? Pull the lock cylinder out of the lock cylinder housing assembly. Position the new key lock cylinder next to the cylinder housing. Align the locking and positioning...
Easy tips

Why does 10A fuse keep blowing?

Why does 10A fuse keep blowing? Re: 10A Fuse keeps blowing (2camsaam) if you have not modified the lighting at all, you will need to trace the short in the engine bay around the lighting, as well as the taillights, and if you are unable to find any suspiscious working (IE wire that is exposed, or just bad connection, etc.) What causes an instrument panel to not work? This indicates the main power wires to the clusters are broken or disconnected somewhere. Main power consists of the positive leads and the ground wires. However, if only one instrument is not...