Most popular

How often should you change brake master cylinder?

How often should you change brake master cylinder? In fact, most master cylinders will last for well over 100,000 miles before they'll need to be replaced. Master cylinders last for this long because they don't have many moving parts inside of them. They also operate within a system that is sealed off from dirt, dust, debris, brake fluid, and even air. Why is there no pedal on my new master cylinder? No Pedal with New Master Cylinder Installation – Quick Fix or Check? A “no brake pedal” condition can be encountered after a new master cylinder is installed, leading the...
Common questions

Is a manual Mustang faster than an automatic?

Is a manual Mustang faster than an automatic? By 50 mph, the 10A was 0.4 ahead, at 60 mph 0.5, at 70 mph 0.6, and at 100 mph, the automatic was a full second ahead of the manual....Testing (and computing) to determine a definitive drag-race winner.2018 Ford Mustang GT (6M)2018 Ford Mustang GT (10A)0-604.43.90-705.44.80-806.75.90-908.17.2 What kind of transmission do you need for a 1969 Mustang? Thanks to the team at Silver Sport Transmissions, everything you need to convert a classic machine to a manual trans is all in one kit. The company’s Tremec TKO 600 five-speed manual transmission kit went...
Easy lifehacks

How do you test a single cylinder ignition coil?

How do you test a single cylinder ignition coil? The only safe way to test for spark is to use a spark plug tester tool. If a coil problem is suspected, measure the coil's primary and secondary resistance with an ohmmeter. If either is out of specifications, the coil needs to be replaced. A coil can be easily bench tested with a digital 10 megaohm impedance ohmmeter. Where is the first cylinder on a compression test? The first cylinder is on the rightmost ones in most engines. Once you have it, put the test compressor’s hose into the spark plug...
Easy lifehacks

What was the valve lift on a 1970 Mopar 340?

What was the valve lift on a 1970 Mopar 340? 1970-71 engines were painted orange; they changed to blue very late in the 1971 model year; the camshaft on automatics had a 268° intake and 276° exhaust opening duration, with 44° overlap (manuals had 276° intake, 284° exhaust, 52° overlap). Valve lift was 0.430" intake, and 0.445" exhaust. What was the horsepower of a 1971 Dodge 340? For the 1971 cars, the 340 (and the 360) came with the "J" type heads, using a single casting, with different machining for the different sized valves. 360 heads were used in the...
Most popular

What kind of engine did Cadillac have in 1949?

What kind of engine did Cadillac have in 1949? The new Cadillac OHV V8 was the big news for 1949, with minor trim differences otherwise. This 331 cu in (5.4 L) engine produced 160 hp (119 kW) and weighed 200 pounds less than the old flathead V8 in addition to being shorter and lower. What was the styling of a Cadillac Series 62 in 1947? The 1947 models received minor styling changes and the addition of Hydro-Lectric window lifts on the Series 62 convertible, which remained the sole ragtop in Cadillac's lineup. Polished metal stone guards on the fenders replaced...
Other

What was the first generation of Ford Econoline?

What was the first generation of Ford Econoline? Through its production, the first-generation Ford Econoline was offered in several variants. Alongside the standard 6-door cargo van, an 8-door version (adding 2 doors on the driver side) was added for 1963. For 1964, a panel van was introduced, deleting side loading doors altogether. Is the Ford Econoline a four wheel drive vehicle? The shared drivetrain with the F-Series marked the beginning of aftermarket four-wheel drive conversions. During the 1970s, the Econoline became popular as a basis for van conversions. Using the sparsely-equipped Econoline cargo van as a basis, a luxurious interior...
Other

When did the Ford 360 engine come out?

When did the Ford 360 engine come out? Ford 360 V8 Engine The Ford 360 Truck engine was introduced in 1968 as the latest FE, or Ford-Edsel, V8 engine to power Ford trucks. What is the lifter diameter of a Ford FE engine? The standard FE lifter diameter is the same as other Ford engines at.874 inch, but I have gone to.904- inch diameters in serious race applications. Larger-diameter lifters offer advantages in terms of strength, and on flat-tappet cams they allow more aggressive lobe profiles. How is the lifter pre load on a Ford? This pre-load correctly positions the...
Easy lifehacks

How much does a restored Mustang cost?

How much does a restored Mustang cost? Classic Camaros and Mustangs that are in driving condition, but still require restoration can cost up to $5,000. What kind of car was the 1965 Mustang? 1965 Mustang Project Car Cars for sale Ford : Mustang 1965 mustang coupe project car and parts car 1964 1 2 1965 Ford Mustang Convertible 1964 1/2 Ford Mustang Convertible - project car clear virginia title Ford : Mustang Fastback 1965 mustang fastback non gt 289 automatic ivy green project car Is there a 65'Mustang convertible for sale? Beautiful 65' Mustang Convertible. This Car was minorly rehabbed...
Other

Do you need to adjust rocker arms on a Pontiac?

Do you need to adjust rocker arms on a Pontiac? Whether you have decided to stay with the stock type stamped rocker arms or Competition Cams Magnum Rollers Rockers as pictured here, or something far more exotic, you will need to adjust valve lash. Torquing the adjusting nut per the old Chilton's to 20-25 ft pounds won't work on any heads that have been milled. How do you adjust a rocker arm lifter? Lightly turn the pushrod with your fingers as you tighten the adjusting nut, and you should feel a point where there is a little resistance (this is...
Other

What replaced the Willys Jeep?

What replaced the Willys Jeep? Ford MUTT military vehicle A little known but important player, the Ford MUTT military vehicle, played a key role, replacing the World War II Willys Jeep as the U.S. Army's primary light vehicle and influencing the development of the 1965 civilian Bronco. MUTT is an acronym for Military Utility Tactical Truck. What's the name of the 1956 Willys Jeep? AACA Regional First Place Award Winner 2015 1956 Station Wagon 226 4WD Don, New Jersey Restoration Article: https://www.hemmings.com/blog/article/multipurpose-motoring-1956-willys-jeep-4x4-wagon/ Courtesy of Hemmings Classic Car If the link is not available, you can also view the article in...