Common questions

How far can a Gradall reach?

How far can a Gradall reach? The machine is now fully operable. -534B-8-1,600 lb. (726 kg) Length-10' (3 m) Maximum Hook Height-45' (13.7 m) Maximum Reach at Full Height - 12' (3.7 m) Wire Rope --3/8" diameter, improved plow steel. Where is Gradall made? New Philadelphia Gradall supports over 300 jobs in New Philadelphia at its state-of-the-art manufacturing facility, where it also produces Vacall vacuum and jetting machines for sewer cleaning, hydro excavation, sweeping and industrial cleanup. What is a Gradall in construction? Gradall aluminum mill maintenance machines are specially designed to efficiently skim dross and maintain walls and bottoms...
Easy lifehacks

What is accumulator charging valve?

What is accumulator charging valve? Accumulator Charging Valves with Load Sensing Single and Dual. Load sensing charging valves send a load sense signal to a load compensated pump creating energy efficient circuits. The charging function is the same as the single or dual charging valves, and is used in load sensing hydraulic circuits. How do you maintain an accumulator? DO NOT USE automotive-type valve cores in high pressure accumulator gas valves. NEVER USE AIR OR OXYGEN, DUE TO THE DANGER OF COMBUSTION/EXPLOSION. Maintain records of the pre-charge pressure and the ambient temperature at the time of installation, and system temperature...
Easy lifehacks

What should I do if my cat 320 overheats?

What should I do if my cat 320 overheats? There are rubber and foam strips that will control airflow to move the air to the right places, some will be attached to the hood maybe and can fall off - overlook none of them because they can cause trouble. Hopefully coolant is no more than 50% glycol, don't overlook this as too high a concentration can result in overheating. Why is my cat excavator engine overheating? Over relief or in compound operations, the engine will lug down (droop) to a specified speed, Cat should have checked this to ensure that...
Common questions

What does a constant high voltage sensor mean?

What does a constant high voltage sensor mean? Four wires providing sensor output and earth circuits, as well as heating element supply and earth circuits. A constant high voltage output from the sensor shows that the engine is running constantly rich and is outside the ECM's adjusting range, whereas a constant low voltage indicates a lean or weak mixture. What is the cyclic voltage of a zirconia oxygen sensor? A cyclic voltage output varying between a low value, around 0.25 V, and a high value, around 0.7 V. When they occur, the transitions between the low and high voltages are...
Easy tips

Do you need a torque converter lockup kit?

Do you need a torque converter lockup kit? No issues at all with sway, so van is properly packed. Had the Richards torque converter lockup kit fitted in Murray Bridge before crossing the Nullarbor. While I have not seen any huge reductions in fuel consumption, except where stated below. Which is the best torque converter for towing? Welcome to this forum. In very general terms a vehicle will use about double the fuel when towing compared to not towing. If you have a LC 200 series towing heavy van 3T + then S4 is the gear to tow in at...
Common questions

Can a two person lift make an operation possible?

Can a two person lift make an operation possible? The MAC tool is available from the following link: Does a two person lift mean twice as much can be lifted? No. Handling by two or more people may make possible an operation that is beyond the capability of one person or reduce the risk of injury to a single handler. What do you need to know about lift analysis? This is a binary classification problem: the user either cancels the subscription ( churn=1) or keeps it ( churn=0 ). The basic idea of lift analysis is as follows: group data...
Most popular

Why is my Komatsu wa250-3 not moving forward?

Why is my Komatsu wa250-3 not moving forward? Rear Dive shaft with the two universal joints are not aligned straight. when drive axle turns the coupler for the two u joints hits the bottom of the torque convert…  read more Expert komatsu wa250-3, It will not move forward or in reverse...damper How does the Komatsu wa 380 engine work? The large cab is mounted with Komatsu’s unique ROPS/ FOPS (ISO 3471/ISO 3449) viscous mounts. The low-noise engine, hydraulically driven fan, and hydraulic pumps are mounted with rubber cushions, and the cab sealing is improved to provide a quiet, low-vibration, dustproof...
Easy tips

When does it get easier to do running?

When does it get easier to do running? Trust that running will get a little easier, over time. Like anything else, the more you do a certain activity, the more your body gets accustomed to it. Running consistently means that at some point you’ll probably start to know what to expect, at least in a physical sense. Do you think running will always be hard? Accept that it’ll always be hard, to some degree. The definition of what’s “hard” simply evolves the more you run. It depends on pace, length, and your personal goals. Also, every single time you begin...
Other

Where can I find the Yale forklift operating manual?

Where can I find the Yale forklift operating manual? Use the search function below if you don’t immediately see the Yale forklift operating manual for the model you are looking for. The Yale brand has a wide range of forklifts to serve your materials handling needs. Our forklift manuals are available for all the top lift truck models from Yale. What causes a Yale forklift to have a problem? Cause of Problem: Damaged connection to traction motor; traction motor armature resistance is too low; field wires are loose or damaged; motor field winding is shorted or too low. Where can...
Easy lifehacks

Why is my Husqvarna 450 not lubricating properly?

Why is my Husqvarna 450 not lubricating properly? Suspecting that the chain was not lubricating properly I did the white paper test per the users manual and do see some splattering on the paper but not as much as I would have expected. How do you unstick a John Deere tractor? When a John Deere tractor has not been moved in a while, the clutch disk will stick to the pressure plate. While you can can unstick the clutch disk by dismantling the engine, it will take many hours to dissemble and reassemble the engine. A trick is available that...