Easy tips

What fan speed should my air handler be on?

What fan speed should my air handler be on? What is the Recommended Speed for Your Blower? For peak performance, most AC manufacturers suggest that 400 cubic feet per minute (CFM) per ton of air conditioning should be used, meaning that 800 CFM should be moving through the evaporator coil for a 2-ton system, and so on. Is 1000 RPM good for CPU fan? Actually 1000 RPM is considered low for case fans from what i heard. 3000ish is considered full speed. Also your CPU-fan RPM seems too low. My CPU fan runs at 1500 RPM while idle, but it...
Other

How often should you change hydrostatic transmission fluid?

How often should you change hydrostatic transmission fluid? NOTICE: Change hydraulic fluid and filter after the first 75 hours of operation and then every 400 hours after. What kind of fluid goes in a hydrostatic transmission? The fluid recommended for Hydro-Gear transmissions and pumps is a 20W-50 motor oil or 15W-50 synthetic motor oil. If the machine has oil reservoirs, they are mounted to the frame behind the seat, for easy access and oil level check accessibility. How often should I change my transmission fluid? Transmission fluid is not something that you need to change as often as your engine...
Common questions

Is the 2000 Buick Park Avenue car tested?

Is the 2000 Buick Park Avenue car tested? The 2000 Buick Park Avenue has not been tested. Like what you see? Find the best deal on a Buick Park Avenue today. There are for sale near you. Certified child passenger safety technicians conduct hands-on tests of a car’s Latch system and check the vehicle’s ability to accommodate different types of car seats. What are the specs of a 1997 Buick Park Avenue? Anti-lock brakes are standard on both, and traction control is standard on the Ultra, optional on the base. The front-drive Park Avenue was redesigned for the 1997 model...
Easy lifehacks

What should my Duramax oil pressure be?

What should my Duramax oil pressure be? GM spec is 16psi at hot idle and 42psi at 1800rpm. What kind of oil do I put in my Duramax Diesel? No excuse for not putting an OEM filter on your truck. Search the forum for the Oil Filter Shootout. Lots of great info there about which filters are better than others. I like many others use Mobil 1 (for Turbo Diesel) fully synthetic oil without any issues. Welcome to the board. I would find another dealer to service the truck. Are there any issues with the Duramax fuel pump? The new...
Other

Can a capful of gas start a snowblower?

Can a capful of gas start a snowblower? Pouring a capful of gas in the sparkplug hole works to start… Just bought our snowblower last year anf. Just bought our just bought our snow blower last year and used it twice. We tried to use it yesterday and found that it won't start. Why is my Murray Snow Blower not starting? Murray snowblower not starting. I took the spark plug out and poured some oil gas mix inside and tried. It started right away. Once that gas finishes, it stop. I put new gas and oil mix, Help me Thank...
Common questions

Is it normal to have clear fluid dripping from your car?

Is it normal to have clear fluid dripping from your car? Clear fluid dripping from your car is usually just water and it’s totally normal. Here’s some good news: Clear fluid dripping from your car is usually just water. The water forms due to the condensation that builds up when you’re running the air conditioning (A/C) system. Sometimes condensation can form in the tailpipe, too. What kind of fluid is leaking from your car? Fluid Color What Type of Fluid It Could Be Orange Coolant Blue Washer Fluid Coolant Purple Coolant Brown Dirty engine oil (usually) But could be Why...
Easy tips

Where can I get a 2000 Chevy Silverado compressor?

Where can I get a 2000 Chevy Silverado compressor? RockAuto ships auto parts and body parts from over 300 manufacturers to customers' doors worldwide, all at warehouse prices. Easy to use parts catalog. 2000 CHEVROLET SILVERADO 1500 5.3L V8 A/C Compressor | RockAuto What kind of refrigerant does a 2000 Chevy Silverado use? Note: a U.S. built 2000 model year truck uses R134a refrigerant, not Freon (R12). OK, you're on the right track. If the system is fully charged (pressure correct), but the A/C compressor clutch does not engage, the fault is electrical. Why is my a / C not...
Other

What kind of crankshaft did a 1967 Chevy V8 use?

What kind of crankshaft did a 1967 Chevy V8 use? The 1967 302 crankshaft was a small journal (2.00-inch rod journals and 2.30-inch main journals) while all 1968-69 302 crankshafts are large journal (2.10-inch rod journals and 2.45-inch main journals) and all were 3.00-inch stroke. All are forged steel and Tuffrided. When did the Chevy 302 V8 come out? The Chevrolet 302 V8 engine was produced mainly for the Camaro Z28 from 1967 to 1969 to be used in Club of America Trans Am racing. At the time in order to compete in Trans Am racing, a car’s engine had...
Easy tips

What should the steering be like on a Chevy Silverado?

What should the steering be like on a Chevy Silverado? Steering should be like a bowl of pudding: smooth and noiseless. Continue reading to make sure the steering in your Chevy Silverado stays like a bowl of pudding. This article applies to the Chevrolet Silverado GMT800 (1999-2006). How to replace clunking on a Chevy Silverado? Use your 15mm box wrench to hold the bolt head still as you remove the 15mm nut using the ratchet and socket. Once the nut is off, push the bolt out of the hole and separate the two shafts. You might have to get crafty...
Easy tips

Why does my GMC Sierra make a noise when I Shift?

Why does my GMC Sierra make a noise when I Shift? That's a comon problem for that body style. If there good, sounds like it could be that motor itself. To figure out if it's you motor or transfercase, jack up the rear end, have a friend inside shift into 4 wheel drive, or try to, and put it in gear and apply some gas. If the front driveshaft is turning then it's something with the front end. What kind of noise does front differential make? Put a listening Stethescope on the Front diff, input shaft bearing has a low...