Other

How to read your check engine light with fix finder?

How to read your check engine light with fix finder? Borrow an OBD reader to get a Check Engine Light reading with the AutoZone Free Fix Finder Service. It's a simple task that takes less than two minutes. Follow these directions carefully. If you're unsure or unable to execute any of these steps, an AutoZoner will gladly recommend a shop nearby. Make sure you're being safe. Can you scan the Check Engine light at AutoZone? In this case, the Malfunction Indicator (Check Engine) lamp on the vehicle’s instrument panel will light steady on. Remember to return the scan tool to...
Common questions

When should I replace my 32 brake pads?

When should I replace my 32 brake pads? Many mechanics advise that if a pad has below 2/32 of an inch left, it must be replaced. A lot of drivers wait up until they hear the noise of the metal wear indication, which can only be heard after the brake pad is worn. This is a solid indication that the brake pads are worn greatly and have to be replaced. How much does it cost to replace rear brake pads? Your price is good, if they flushed the fluid with your service. $7xx for a rear brake job. Having ALL...
Easy lifehacks

What should I do if my turn signal bulb has failed?

What should I do if my turn signal bulb has failed? Park your vehicle and set the emergency brake. Step 2: Switch on the turn signals. Turn the ignition to the accessory position and turn on the turn signals one side at a time. Walk around the vehicle to determine which turn signal has failed. Step 3: Switch off the turn signals. Turn the turn signals and ignition off. Why is the right turn signal light not working? Back probe the wire that supplies power to the right turn signal lights; the test light should not light. If the test...
Easy lifehacks

Are there any upgrades for the F250 Powerstroke?

Are there any upgrades for the F250 Powerstroke? Bolt-on power upgrades and tuning are both effective and affordable, but there are plenty more upgrades to choose from for 6.7L Powerstroke drivers on a budget. From simple bolt-on parts like intake kits and intercooler pipes to helper springs and shocks, we're here to prove that modding your 6.7L F250 doesn't need to break the bank. Do you need SOTF for Ford PowerStroke delete? Only option as far as tuning goes for around $800, is the SCT x4 with delete tunes, or a used mini maxx. No SOTF with the x4. But...
Most popular

What are the parts numbers for a wire harness?

What are the parts numbers for a wire harness? You must use one of the following computer part numbers 89017733, 12576106, 12583560, or 12602802 with this harness. No matter what changes are made to the engine and even if it is remaining factory original or “stock” the vehicle’s ECM, or computer, must be re-programmed before engine start up. Is the wire harness on a Vortec engine legal? NOTE:*This harness is not emissions legal. The 2003–2006 4.8L, 5.3L & 6.0L TBW Vortec engines had four oxygen sensors from the factory, but we have provisions for only two, one on the driver...
Common questions

How much is a 2005 Mustang V6 convertible worth?

How much is a 2005 Mustang V6 convertible worth? 2005 Ford Mustang Retail PricesTrimMSRPCarGurus Instant Market ValueV6 Premium Convertible RWD$24,815$8,323GT Deluxe Convertible RWD$30,240$15,032GT Coupe RWD$25,815N/AGT Convertible RWD$30,240$16,859 How much is a 2005 Ford Mustang convertible? Mustang TrimsConvertibleOriginal MSRP / PriceDriveMustang 2dr Conv Deluxe$23,940 / N/ARWDMustang 2dr Conv GT Deluxe$29,565 / N/ARWDMustang 2dr Conv GT Premium$30,745 / N/ARWDMustang 2dr Conv Premium$24,815 / N/ARWD What is a 2005 Roush Stage 1? Stage 1 options included leather seats, Jack Roush-autographed gauge cluster, and billeted aluminum pedals and shift knob. Stage 2 was the more popular version, with performance suspension and handling components combined...
Other

How to prevent and remove condensation inside headlights?

How to prevent and remove condensation inside headlights? If you have aftermarket headlights (or any headlight with condensation inside), there are a few things you can do to remove condensation (and prevent it from happening again or at all) from inside them. Click through to the site below for detailed written instructions. How can I get water out of my headlight? Even if you take the lenses off and dry them, the problem is likely to reoccur unless you replace all of the components. If you’ve got a lot of water built up in your headlights, the easiest way to...
Most popular

What kind of keys does a Ford Contour use?

What kind of keys does a Ford Contour use? (Here is the list of models that have PATS1 system: Ford Contour 97-98, Expedition 97-98, (optional transponder), Mustang 96-97 (optional transponder), Mystique 97-2000 optional transponder), Navigator 1998, Sable 96-97 (optional transponder), Taurus 96-97. The most common keys that PATS1 uses are H72-PT and H73PT. Where is the color code on a 1999 Ford all model? AutomotiveTouchup paint products are custom mixed to perfectly match the color of your 1999 Ford All Models using a basecoat/clearcoat system just like factory specs. To insure a proper match, you’ll need to know your vehicle’s...
Most popular

How do you remove a starter from an expedition?

How do you remove a starter from an expedition? Unscrew the copper bolt holding the electrical wire for the starter in place. This will give you more room to work with for disconnecting the starter from the engine. Remove the bolts that connect the starter to the flywheel of the Expedition. What to do if your Ford Expedition won't start? If your Ford Expedition won't start, there are a couple of solutions. If you can jump-start the Expedition, the battery or alternator might be the problem. If a jump-start fails, the starter might need replacement. Fortunately, replacing the starter is...
Easy tips

Why would a fusible link blow?

Why would a fusible link blow? Circuit Overloading The easiest way to blow a fusible link is to pass more current through it than it can handle. Doing this will open the floodgates for electricity, and the fusible link will blow out like a drinking straw on the end of a fire hose. What causes the fuse to blow on a fuel pump? I would start at the fuel pump itself. If the fuse blows as soon as you turn on the key, undo the connector at the tank to the pump and put in a new fuse. Try it...