Easy tips

When does the CKP sensor fail on a Dodge Dakota?

When does the CKP sensor fail on a Dodge Dakota? When the crankshaft position (CKP) sensor fails on your 5.2L V8 equipped Dakota or Durango, it'll cause a ‘no start’ condition. In this tutorial I'll explain how to test the crankshaft position sensor on your 1997, 1998, 1999 5.2L V8 Dodge Dakota and 1998, 1999 5.2L V8 Dodge Durango. What happens when crankshaft position sensor ( CKP ) fails? If the sensor (CKP) has failed completely, then the computer won’t send any fuel to the injectors. Consequently, Leaving you unable to start the car. A Crankshaft Position Sensor (CKP) Failure...
Easy tips

How you know alternator is bad?

How you know alternator is bad? If you hear a whine or the sound goes fuzzy when you hit the gas, your alternator is probably failing. If the vehicle won't crank or start but the headlights are still working, look to problems with the starter or other parts of the engine. Why does my new alternator make a whining noise? New alternator installed has a whining noise. Sounds to me like there is a draw already on the alternator. There are three wires going to the alternator. One red going to the back of the alternator and a red and...
Most popular

Why does my thermostat stay on hold?

Why does my thermostat stay on hold? A Hold message on a Honeywell Thermostat tells the thermostat to maintain the HVAC system for the building at a set temperature. The temperature will be maintained until the Hold expires or the temperature is manually changed. In other words, a Hold is a command that overrides the set temperature. How do I get my thermostat off hold? Press + or - to adjust the temperature.TEMPORARY HOLD is displayed and the setpoint temperature flashes. While it's flashing, press Hold (Mode) button to change to Permanent Hold.To cancel the Permanent Hold, press + or...
Easy lifehacks

Are there any problems with the 2008 Dodge Durango?

Are there any problems with the 2008 Dodge Durango? The 2008 Dodge Durango has 140 problems & defects reported by Durango owners. The worst complaints are electrical, engine, and seat belts / air bags problems. What causes a Dodge Durango to not start? Another common problem specifically impacts Dodge Durango vehicles with the 5.7-liter V8 engine. On these, the Camshaft position sensor occasionally fails, causing the engine to stall or not start. What causes engine problems on a Dodge 3.7? The biggest issue that causes problems on the 3.7 is excessive engine heat. Making sure your engine never overheats or...
Easy tips

How do you adjust odometer on Dakota digital gauges?

How do you adjust odometer on Dakota digital gauges? You will be instructed to set mileage • Now unplug the power • Plug in the desired gauge harness to both the gauge and module • Press and hold the ENTER button • Apply power to the module • You can now check the odometer miles • Press ENTER when finished to get back to the gauge selection menu If the gauge does not ... How do I enter setup mode on digital Dakota? To enter setup, press and hold the switch (for systems with 3 switches, hold the center switch)...
Easy tips

How can I reset the camshaft timing on my car?

How can I reset the camshaft timing on my car? Make the mark with a piece of chalk on the harmonic balancer indicating TDC (top dead center). Once the mark has been made, connect the car battery and the lead spark plug with the timing light. What should the timing marks be on a camshaft? After you have installed your crankshaft and camshaftand connected the two with your timing set, take a moment to make sure you have your cam installed "straight up," which means the tick marks on the timing gears point toward each other. At this point, the...
Most popular

Are there any ABS codes and brake light on?

Are there any ABS codes and brake light on? I also have 2 more codes on top of those 6, and the other two are This happend to my 04, turns out it was the brake switch on the pedal, and was not covered by warrenty. Not sure if its the same for you, I dont know how you would check the switch to see if it is bad tho. Interesting. I'll look into that too. Were you throwing any codes? When does the ABS warning light come on? Anytime a problem occurs in the ABS brake system the warning...
Easy lifehacks

Does RAM make a regular cab?

Does RAM make a regular cab? Ram trucks come in several different cab sizes to accommodate your needs: Regular, Crew, Quad Cab® and Mega Cab®. A Regular Cab can seat up to three passengers, while the Quad Cab®, Crew Cab and Mega Cab® feature two rows of seating for up to six passengers. What's the rating of a 2004 Dodge Ram? 2004 Dodge Ram 1500 Review. Dodge’s Ram is available in 1500, 2500 and 3500 versions, which translates to half-ton, three-quarter-ton and one-ton ratings, respectively. While the 2500 and 3500 models are designed for serious work, an offshoot of the...
Other

Why does my Durango sport not idle at 1400 rpm?

Why does my Durango sport not idle at 1400 rpm? Hello again, Dave, I started the engine over twelve times with the new injectors and the engine, a 4.7L in a 2002 Durango Sport 4WD, will not idle below 1400 RPM. The idle is steady. Do you have any other experience or suggestions which might help with case? Best regards, Leebar How does the PCM work on a Dodge Durango? The components in the engine, transmission, drivetrain and other areas send information to the PCM. If the PCM detects an issue with a component, it triggers the malfunction indicator light...
Other

Why does my car shake over 50?

Why does my car shake over 50? The most common reason for a car to shake is related to tires. If the tires are out of balance then the steering wheel can shake. This shaking starts at around 50-55 miles per hour (mph). If your steering wheel shakes while you are braking then the problem could be caused by “out of round” brake rotors. What to do about clunking in front end of Dodge Charger? I took the car to my local Chrysler dealer and they came for a test drive and also heard the sounds it was making...we went...