Common questions

What do rear end ratios do I have in my Ford?

What do rear end ratios do I have in my Ford? Identifying Ford Vehicles Equipped with OE Traction Rear Ends Ford cars and trucks from 1968 on have an axle code on the Certification Plate, information on this plate can be used to determine if you vehicle is factory equipped with a limited slip positraction rear end - differential. What should the rear gear ratio be on a Mustang? And less time spent shifting means quicker lap times. A track car may use something like a 3.55 rear gear ratio, whereas a drag car may have 4.10 or 4.30 rear...
Common questions

Is FX37 All wheel drive?

Is FX37 All wheel drive? The FX37 comes standard with rear-wheel drive, while intelligent all-wheel drive is available. All-wheel drive is standard on the FX50. Is Infiniti FX37 a good car? Despite the tight headroom in the rear seat, the 2-row 2013 Infiniti FX is a good used luxury midsize SUV. The interior is filled with opulent materials, and there's a nice selection of standard features. What was the last year for the FX37? 2013 2013 Infiniti FX37 AWD. Last year, a face lift. This year, a new engine. Is Infiniti FX35 a crossover? INFINITI FX35, FX45, & FX50 Crossover...
Easy tips

What axle is in Ford f150?

What axle is in Ford f150? Ford 9.75" Axle SpecsManufacturer:Ford Motor CompanyFull/Semi Float:Semi floatingAxle Type:Rear differential, mostly solid axle but an independent rear suspension (IRS) version was used in select SUVs beginning in 2003GAWR:Maximum 4,500 - 4,800 lbs (9.75HD version)Ring Gear:9.75 in What axle ratio does my f150 have? The 2019 Ford F-150 offers 3.15, 3.31, 3.55, and 3.73 axle ratios. What is the difference between a Dana 50 and a Dana 60? Telling The Difference: A Dana 50 will have 229 cast into the center section webbing on the pinion support and a 1-1/8″ pinion nut. A Dana 60...
Easy lifehacks

Is Tacoma front or rear wheel drive?

Is Tacoma front or rear wheel drive? Drivetrain: standard rear-wheel drive; available four-wheel drive. What is a 2002 Toyota Tacoma worth? 2002 Toyota Tacoma Value - $1,122-$7,016 | Edmunds. When to use 4 wheel drive in Toyota Tacoma? Tell drivers that they should only use the 4wd system on loose surfaces, where binding is impossible because wheels can easily break traction. Insert slip differentials between the inside and outside wheels, and also between the front and rear axles. Where is transfer case on Toyota Tacoma 4 wheel drive? The transfer case (t-case) was engaged with a lever in the vehicle’s...
Most popular

How do you reset a Volkswagen light?

How do you reset a Volkswagen light? Press and hold Minute Reset button. Press Trip Reset button until it says “IN01” Turn key to on position and then back off....How to Reset Your VW Service Light by Model YearTurn your key into the on position.Select the Settings menu.Select the Service submenu.Select Reset option.Press OK.Press OK again to confirm. What does the temperature warning light mean on a VW Passat? Description: The temperature warning light illuminates due to the engine coolant getting too hot and the engine overheating. If the engine temperature warning light comes on, pull off the road as...
Easy lifehacks

How many Reventons are there in the world?

How many Reventons are there in the world? The Reventon debuted back in 2008 and had a limited production run of 21 units. One of the 21 cars currently sits in a museum, so only 20 are truly available. How rare is the Lamborghini Reventon? It is Lamborghini's most powerful and most expensive car ever. It is built from carbon fiber, and there are only 20 in the world. Although the mechanics are heavily based on the Murciélago LP640, the output of Reventón's 6.5-liter V-12 is upgraded to 650 horsepower. How much is a Lamborghini Reventon worth? Lamborghini Reventon ModelsTrimReventonEngine6.5L...
Easy tips

What are the torque specs for Lister Petter LPW?

What are the torque specs for Lister Petter LPW? The “Turbo” bolts are higher strength and can be used in naturally aspirated engines, but be aware a set of Turbo bolts currently runs over $400 if you want to make this upgrade. We get requests for head torque specs. What are the different types of Lister diesel engines? Lister TS1, TR1, TS2, TR2, TS3 and TR3 Range of Air Cooled Diesel Engines Lister Petter TS2M Twin Cylinder Air Cooled Marine Propulsion Engine with Hurth Gearbox Lister Petter TS3M Three Cylinder Air Cooled Marine Propulsion Engine with PRM Gearbox Lister TX2...
Easy tips

Where is the skid steer loader cab located?

Where is the skid steer loader cab located? The Cat Skid Steer Loader cab is designed to make machine operation simple, productive and comfortable. Getting in and out of the cab is easy through a wide opening with three point grab irons and skid-resistant steps. Tilt cylinders are neatly located under the lift arms so not to interfere with operator access and egress. How big is a 246b skid steer loader? 236B 246B 248B Engine Engine Model Cat®3044C DIT Cat®3044C DIT Cat®3044C DIT Net Flywheel Power 52 kW 70 hp 58 kW 78 hp 57 kW 76 hp Gross Power...
Most popular

Are Cat C7 engines reliable?

Are Cat C7 engines reliable? The Cat C7 is an inline 6-cylinder diesel engine with a displacement of 7.2 liters or 441 cubic inches. Not too many 3116 owners were proud of Cat's reputation behind the engine and, while the engine did prove reliable, it didn't offer enough power for most users and was not very fuel-efficient. Why does cat not have a C7 engine? We were told today that the reason Cat does not have any parts for the C7 is they sold that line to a manufacture in Minnesota. Now after 3 weeks of giving us the run...
Easy tips

How much does a Terex PT 60 skid cost?

How much does a Terex PT 60 skid cost? There are currently 2 items for PT-60 listed in Australia from 2 professional sellers and 0 private businesses. Historically Terex PT-60 models have been listed between $2,100 and $461,500, averaging at $51,248. The current average price of a PT-60 listing is $46,250. What do you need to know about Terex parts? Dedicated parts staff ensuring prompt and professional support with access to factory engineers and product management for specialist advice. A unique ability to supply many different replacement parts for your machine whether old or new. Browse our extensive auger tooling...