Most popular

Where is the transfer case on a Chevy 4×4?

Where is the transfer case on a Chevy 4x4? It’s no longer necessary to exit the vehicle and manually lock the hubs on the front wheels. This 4x4 system is operated with a transfer case knob on the dash board. Some Chevy systems are two-speed and some single speed. The most elaborate systems have five driving settings. Problem with the system can often be related to knob settings. How do you troubleshoot a Chevy 4 wheel drive? How to Troubleshoot a Chevy Four-Wheel Drive. Chevy uses an electronic control to transfer the power from two-wheel drive to four-wheel drive. It’s...
Easy tips

Why was the Chevrolet Monte Carlo SS discontinued?

Why was the Chevrolet Monte Carlo SS discontinued? Another reason that Chevrolet discontinued the SS package was that it wanted to focus on promoting the Monte Carlo as a luxury car and not a performance car. Even with that decision, the Monte Carlo slowly gained a reputation for its exceptional performance, eventually taking a place on NASCAR tracks from 1971 to 1989. Is there a 1985 Monte Carlo SS for sale? This 1985 Chevrolet Monte Carlo SS is an icon that has been kept in an amazing survivor condition, right down to numbers-matching high-output V8. And because these coupes have...
Other

What to do if you cant push the gas pedal?

What to do if you cant push the gas pedal? Explain your symptoms and have the mechanic drive the vehicle to verify the issue. Once the issue has been fully diagnosed, the mechanic would relay his/her findings over to you to make a repair decision. The statements expressed above are only for informational purposes and should be independently verified. What happens when you push the gas pedal on a golf cart? 2013 Yamaha electric golf cart push the gas pedal real slow and the car will go but if I push it fast to the floor the cart would just...
Other

What to look for in a Chevrolet S10?

What to look for in a Chevrolet S10? When it comes to your Chevrolet S10, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Remanufactured Engine product and part brands so you can shop with complete confidence. What kind of engine does the Chevrolet S-10 have? The flex-fuel (gasoline/ethanol) engine had an upgrade for some versions (LT and LTZ) and offered 206 hp with a 2.5 L LCV Ecotec with direct fuel injection. Also, for the first time in Brazil, Chevrolet offered the flex-fuel S-10 with four-wheel drive. When...
Easy lifehacks

What was the color of the 1998 corvette?

What was the color of the 1998 corvette? DID YOU KNOW: In 1998, General Motors experimented with a couple of paint colors that were never “officially” issued as optional choices to consumers. In preparation for its 50th Anniversary, Chevrolet produced fifteen Corvettes with a high metallic painted they called “Aztec Gold.” What was the safety feature of the 1998 corvette? Many key safety features that were introduced in the 1997 Corvette carried over for the 1998 model year, while several others were introduced with the onset of the convertible. Daytime automatic running lights were included in both variants of the...
Other

Is the mode actuator on a 2002 envoy?

Is the mode actuator on a 2002 envoy? Mine is a 2006 and does not have auto temp controls. I just changed my mode actuator on my 2002 Envoy. Is there a knocking noise coming from my car? There is a knocking sound that started coming from my car a couple days ago. It's not a ticking or a clanking knock. It's more of the sound when you take your fisted hand and starting from an inch above a wooden desktop tap at about 1 knock per second. Are there different Dorman P / ns for 2002 envoy? Not sure...
Common questions

Why is black smoke coming out of my exhaust?

Why is black smoke coming out of my exhaust? If you see black smoke coming out of your exhaust, you either have a stuck choke, bad choke pull-off, or are not getting enough heat to your choke in order for it to move to the off (open, vertical) position. If your choke is operating properly and you see black smoke, your carburetor is very rich and needs to be rebuilt. Can a bad catalytic converter cause black smoke? Yes, a bad catalytic converter can cause black smoke. This happens when your car engine is burning oil too much or from...
Most popular

Can a GMC Blazer be used in a Chevy S10?

Can a GMC Blazer be used in a Chevy S10? Because the Chevy S10 has practical hardware, you can use components that are designed for other automobiles to power an S10 truck. Hardware for GMC vehicles manufactured in 2003 with 4.3-liter components can be used with an S10, and 1996 Blazer items are suitable for a Chevy S10 as well. Is the Chevy S-10 Blazer good for towing? Select your Year, Make, Model and Engine to find those that fit your vehicle. Your rugged Chevrolet S-10 Blazer is excellent for towing large loads and off-road activity. Leaking pipes, gaskets and...
Other

Do you have to take heads off to change lifters?

Do you have to take heads off to change lifters? Yes, it is possible to replace lifters without removing the heads. However, if you are entirely new to this, then it is safe for both you and your vehicle to remove the heads. Or else, in order to save little time, you might end up disturbing the surrounding components of lifters. Can a worn out hydraulic lifter be replaced? New hydraulic lifters can make a tremendous difference in the way that a vehicle runs as well as how the engine sounds. Worn out lifters will have a "clacking" noise within...
Easy lifehacks

How to change the mode of a Chevy Silverado?

How to change the mode of a Chevy Silverado? The control head therefore must apply a ground on the tan wire to reduce the voltage to zero to command clockwise rotation. It must also apply voltage to bring the reading to 5 volts in order to command counter clockwise rotation. All voltages referred to above should be considered nominal volts. What should the low and high wire be on a Chevy Silverado? The low side should be above 28 to activate the low pressure switch and under 350 on the high side. Check the wire terminal 85 on the relay...